In this problem, a refrigerant enters the compressor as a saturated vapor at 10°C and leaves the compressor at 1400 kPa with an enthalpy of 281.39 kJ/kg and a velocity of 50 m/s. The rate of work done on the refrigerant is measured to be 132.4 kW. If the elevation change between the compressor inlet and exit is negligible, determine the rate of heat transfer associated with this process, in kW.**Diagram Explanation:**The diagram labeled "FIGURE P5–172" illustrates a compressor where refrigerant R-134a is processed. - **Inlet:** - The refrigerant enters as a saturated vapor. - Conditions: 10°C, 5 kg/s.- **Outlet:** - The refrigerant leaves at 1400 kPa. - Velocity: 50 m/s.This setup is used to analyze the thermodynamic processes occurring within the compressor, focusing on work and heat transfer calculations. **Problem 5-172:**Refrigerant 134a enters a compressor with a mass flow rate of 5 kg/s and a negligible velocity. The refrigerant...(Note: The text is incomplete and there are no graphs or diagrams to describe.)

Answered: Image /qna-images/answer/253e1e5a-525d-45fc-a510-fb4c7fa2183b.jpg

eters the compressor as a saturated vapor at 10°C and leaves the compressor at 1400 kPa with an enthalpy of 281.39 kJ/kg and a velocity of 50 m/s. The rate of work done on the refrig- erant is measured to be 132.4 kW. If the elevation change between the compressor inlet and exit is negligible, determine the rate of heat transfer associated with this process, in kW.

eters the compressor as a saturated vapor at 10°C and leaves the compressor at 1400 kPa with an enthalpy of 281.39 kJ/kg and a velocity of 50 m/s. The rate of work done on the refrig- erant is measured to be 132.4 kW. If the elevation change between the compressor inlet and exit is negligible, determine the rate of heat transfer associated with this process, in kW.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 0.8-m3 insulated rigid tank contains 1.54 kg of carbon dioxide at 100 kPa. Now paddle-wheel work is done on the system until the pressure in the tank rises to 135 kPa. Determine the actual paddle-wheel work done during this process.
Question 3 An insulated 1.15 m³ rigid tank contains air at 350 kPa and 50ºC. A valve connected to the tank is now opened and air is allowed to escape until the pressure inside drops to 175 kPa. The air temperature during this process is kept constant by an electric resistance heater placed in the tank. Determine the electric work done during this process. The air is considered ideal gas with R-0.287 kPa m³/kg.K. At T-50 °C-323 K, h-323.30 kJ/kg and u-230.58 kJ/kg. Air V=1.15 m³ P= 350 kPa T= 50°C Wein
A piston system contains a hot fluid at 250kPa pressure that is cooled while being stirred by a paddle wheel. Initially, the internal energy of the fluid is 1500 kJ and volume is 2m3. During the cooling process, the fluid loses 400 kJ of heat, and the paddle wheel does 100 kJ of work on the fluid. At the end, volume reduces to 0.5m3. Pressure remains constant. Determine the final internal energy of the fluid. Neglect the energy stored in the paddle wheel.
8.2 kg of saturated water vapor at 200 kPa in a rigid container exchanges heat to the surroundings until its temperature reaches 110°C. What is the heat exchanged in this process (in MJ)?
A cylinder-piston device provided with stops, so that the water supports the weight of the piston, and the force of the atmosphere,It contains water, initially at 300 kPa and 0.5 m3 / kg. The water is heated to a saturated steam condition and the plunger rests on the stops. With the plunger on the stops, the water is heated up to the pressure of 600 kPa. In the P-V and T-V diagrams, with respect to the saturation lines, the process curves go through the initial and final states of the water. On both T-V and P-V diagrams draw the isotherms that pass through both states, and show their values in ° C, in the isotherms. (see img 1)
Please solve this problem.
Refrigerant-134a (R-134a) enters the expansion valve of a refrigeration system at 650 kPa with a quality of 20%. The pressure of R-134a at the outlet is 200 kPa. a)Determine the temperature of R-134a at the outlet in oC. Calculate the difference of internal energy between the outlet and inlet in kJ/kg
Determine the work required (in kJ/kg) for a pump that is used to increase the pressure of a liquid water stream from 100 kPa to 1500 kPa isothermally at 20 °C. The specific heat of water (C) is 0.0035 kJ/kg.K. its specific volume is 0.001031 m³/kg and its volume expansivity (B) is 250x10 K
The case of a piston-cylinder device provided with stops is presented. Initially, the water supports the weight of the piston, and the force of the atmosphere is 300 kPa and 0.4 m3/kg. The water is heated until it reaches a saturated steam condition and the plunger rests on the stops. With the piston on the stops, the water is heated to a pressure of 700 kPa. Plot the curves of the processes on the p-V and T-V diagrams indicating the initial and final states of the guide. On both the p-V and T-V diagrams plot the isotherms passing through both states, and show their values in °C.
A 12-ft3 rigid tank contains refrigerant-134a at 30 psia and 55 percent quality. Heat is transferred now to the refrigerant from a source at 120°F until the pressure rises to 50 psia. Assuming the surroundings to be at 75°F, determine the amount of heat transfer between the source and the refrigerant.