The dc backup generator that supports the local servers in the centre directly supplying a dc voltage, is a 200 V compound generator with the following circuit parameters: Armature resistance Ra: 0.1 2 Shunt resistance: 40 Series resistance: 0.05 2 The total load of the servers is equal to 10 kW and needs to be maintained to 200 V. You can ignore the armature reactance. The voltage drop across each brush of the motor is equal to 1 V. ● (Q2, What is the EMF and the armature current of the generator if the generator is connected as a long-shunt compound generator. What is the EMF and the armature current of the generator if the generator is connected as a short-shunt compound generator. (Q21) (Q2g Your colleague, Bruce, recommends using a series de generator instead. Under what circumstances would his suggestion make a better alternative?

The dc backup generator that supports the local servers in the centre directly supplying a dc voltage, is a 200 V compound generator with the following circuit parameters: Armature resistance Ra: 0.1 2 Shunt resistance: 40 Series resistance: 0.05 2 The total load of the servers is equal to 10 kW and needs to be maintained to 200 V. You can ignore the armature reactance. The voltage drop across each brush of the motor is equal to 1 V. ● (Q2, What is the EMF and the armature current of the generator if the generator is connected as a long-shunt compound generator. What is the EMF and the armature current of the generator if the generator is connected as a short-shunt compound generator. (Q21) (Q2g Your colleague, Bruce, recommends using a series de generator instead. Under what circumstances would his suggestion make a better alternative?

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

3 Phase 50 Hz 25 Hp asynchronous motor 415 V triangle is working. It rotates at 1480 rpm/mın under full load. Stator phase effective resistance Rs=0.02 ohm stator phase leakage reactance Xs=0.25 ohm According to the stator terms, the effective phase resistance of the rotor is R2=0.06 ohm and the leakage phase reactance of the rotor is X2=0.2. The motor draws 750 W at idle. a- Calculate the current that the motor will draw as it will start directly in the first developmentb- Calculate the initial moment of development,c- Since the motor is running under full load, draw the equivalent circuit and draw the current drawn by the motor from the mains, d- Calculate the power and efficiency that the motor will draw under full load by calculating the losses, e- Full load torque of the motor, f- The maximum power that can be obtained from the engine g- Calculate the maximum torque, Can you please give all the answers? Thank you very much for your hard work.
A three phase 480V, 30Hp induction motor draws 33A and consumes 25KW. Determine power factor
What is the answer to this problem?
the stator of 3 phase induction motor has 3 slots per pole per phase .if supply frequency is 50Hz,the speed of the rotating stator flux
Please answer the question in detailed manner.
the student will be able to learn the concepts of a 3 phase synchronous motor.
At starting, the winding of a 220V, 50 Hz split-phase induction motor have the following values: Main winding: R = 102 ; x₁ = 25 22 Starting winding: R= 25 Q; X₂=1 = 15 Ω What is the phase angle between I and I?
The output of the 3-phase, 435 V induction motor is 17 kW and operates at power factor of 0.75 lagging with an efficiency of 87%. Calculate the reading on each of the two wattmeter connected to measure the input. The value of P₁ is = The value of P₂ is =
I need the answer as soon as possible
Inductive and synchronous motors are connected to 240 V power supply. Inductive motor draws 40 A and has power factor 0.85 lagging. Synchronous motor draws 30 A and has power factor 0.65 leading. Find for each motor: 1. Watts 2. VA 3. VAR
Power available at the shaft of a 3-phase induction motor is calculated by Rotor output- Friction & windage losses Rotor Input- Rotor copper losses Rotor Input- Friction & windage losses Rotor output- Rotor copper losses An induction motor at stand still condition is equivalent to A transformer whose secondary is short circuited a transformer whose secondary is open circuited a transformer whose secondary is connected to a resistive load a transformer whose secondary is connected to a inductive load
A single phase induction motor is rated 5 hp, 75% power factor and 220 volts. What approximate size of capacitor is necessary to raise the power factor to about 98%. O 2.5 KVAR O 2.5 KVAR O 2 KVAR O 3.5 KVAR