Determine the volume of coal storage necessary for an emergency reserve of 8% of the annual consumption and the required area of the storage if the storage depth is 2.55 m and the annual consumption from the yearly duration cuve is 82000 tonnes.

Determine the volume of coal storage necessary for an emergency reserve of 8% of the annual consumption and the required area of the storage if the storage depth is 2.55 m and the annual consumption from the yearly duration cuve is 82000 tonnes.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The area of the reservoir in problem 4 is 3.0km2 . The plant supplies a load of 12MW for 3h. Calculate the fall in the level of the reservoir during this period.
A settling tank having a depth of 3.5m and surface area of 1000m^2 is used to remove particle of size 0.01mm and specific gravity of 2.6 . Calculate the removel percentage of the tank for the discharge of 7000m^3 per/day. Take viscosity of water as a 1.1×10^-3 kg/ms.
At a potential hydro-plant site, the average elevation of headwater is 582m, the tailwater is 480m. The average annual water flow was determined to be equal to that volume flowing through a rectangular channel 8.15m wide, a depth of 1.22m and the velocity is 4.6m. The turbine efficiency is 87%, generator efficiency is 95%, and a head loss is 3.5% of the gross head. Find the following: a. the generator power in kW 44,150 28,206 36,490 b. the annual energy (kWH per year) that can be produced if the plant operation is 345 days per year 235,154,731 302,142,714 244,334,189 c. the annual income of the plant if the cost of the energy produced is P0.60 per kW-hr 141,092,838 181,285,628 162,653,256
Settling tank has a depth of 3 m and surface area of 900 m2 is used to remove particles of size 0.01 mm and specific gravity 2.65. Compute the removal percentage of the tank for the discharge of 8000 m3/d. Take viscosity of water equal to 10-3 kg/m.s.
Q/ Design the liquid storage tank if water capacity = 725,000 liters and with following specifications:- == fc' 35 Mpa, fy =420 Mpa Water height Hw-2.5m, Soil height H,= 2m, Ground water height Hg=1.5m Water density Yw= 10 kN/m³, Soil density y= 17.5 kN/m³ and 0 =30.
Given the following average hourly demand rates in gallons per minute, (a) findthe uniform 24-hour pumping rate and the required storage necessary to supply for this demand;(b) if the period of pumping is 12 hours (from 12 am to 12 pm) find the required storage.
Design the pipe that will connect two reservoirs for a water distribution system of a certain sitio. It was found out that the water source can sustain the water demand of the place for the next 25 years. Data: Elev. Of Reservoir A = 1050 m Elev. Of Reservoir B = 1000 m Total length of pipe (corrugated G.I.) = 2.5 km Current Population = 150 Design Period = 25 years Annual Population Growth Rate = 2.5% Per Capita Water Consumption (PCWC) = 100 liters/person-day You may use any method that is most suitable for the problem. (PLEASE INCLUDE COMPLETE SOLUTION AND DRAWING)
A confined aquifer has a transmissivity, T, of 30 m2/day and a storage coefficient, S, of 0.0008. A production well of radius, r, 0.2 m is pumped at 200 litres/min for 4 days and shut off. Calculate the maximum drawdown and the drawdown 10 days after the start of pumping at the well. Note: Calculate the result rounded to the second digit after the decimal point. Hint: Cooper-Jacobs Solution is valid for u<0.01: In 2.25Tt p2 S S = 47T
Assume that the ESP of Problem 5.1 is built with an actual collection area of 5400 m2, Now suppose that the actual drift velocity turns out to be 5,0 cm/s and the actual gas flow turns out to he 5500 m3/mtn, Calculate the actual efficiency, 5.1 A 98% efficient ESP is to treat a gas stream flowing at 5000 m3/ min. If the effective drift velocity is 6.0 cmf% calculate (a) the plate area {required and actual) in m2, and (b) the number of plates if each plate is 6 m hy 10 m, and there are 3 mechanical fields.
L. The diversion requirement of a 5-ha farm was estimated to be 10mm/day during peak periods. If the pumping plant has a 60% efficiency, how many kilowatt-hour energy is required to lift water 5 meters?
I need the answer as soon as possible