Determine the dosage and daily consumption of powdered activated carbon (PAC) required for trichloroethylene (TCE) removal given the following design specifications: . Influent concentration = 1 mg/L TCE . Carbon type: Calgon Filtrasorb 400 (12 x 40 mesh); pb = 450 g/L • Freundlich parameters for TCE • Freundlich capacity parameter K = 55.9 (mg/g)(L/mg)¹/n • Freundlich intensity parameter 1/n = 0.48 Treatment objective = 0.005 mg/L TCE Flow rate=378.5 L/min (100 gal/min) . . Assume that no other solutes compete with TCE for adsorption onto the PAC, and that the PAC is saturated at the treatment objective.

Determine the dosage and daily consumption of powdered activated carbon (PAC) required for trichloroethylene (TCE) removal given the following design specifications: . Influent concentration = 1 mg/L TCE . Carbon type: Calgon Filtrasorb 400 (12 x 40 mesh); pb = 450 g/L • Freundlich parameters for TCE • Freundlich capacity parameter K = 55.9 (mg/g)(L/mg)¹/n • Freundlich intensity parameter 1/n = 0.48 Treatment objective = 0.005 mg/L TCE Flow rate=378.5 L/min (100 gal/min) . . Assume that no other solutes compete with TCE for adsorption onto the PAC, and that the PAC is saturated at the treatment objective.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

This is Structural theory. Formula: For #1 : r-3-c #2: r+m-2j #3: r+m-2j
An aluminum pipe has a length of 52 m at a temperature of 6°C. An adjacent steel pipe at the same temperature is 8 mm longer. At what temperature will the aluminum pipe be 24 mm longer than the steel pipe? Assume that the coefficient of thermal expansion for the aluminum is 22.5x10-6/°C and that the coefficient of thermal expansion for the steel is 12.5×106/°C. Answer: °℃ Tf= i
what kind of elements are considered to develop equipment for the vibro comaction and vibro replacement
An aluminum pipe has a length of 68 m at a temperature of 15°C. An adjacent steel pipe at the same temperature is 10 mm longer. At what temperature will the aluminum pipe be 30 mm longer than the steel pipe? Assume that the coefficient of thermal expansion for the aluminum is 22.5×106/°C and that the coefficient of thermal expansion for the steel is 12.5x10-6/°C. Answer: °℃
A 100.0-mL sample of spring water was treated to convert any iron present to Fe+2. Addition of 25.00-mL of 0.015102 N K2Cr2O7 resulted in the reaction. The excess K2Cr2O7 (294 g/mol) was back-titrated with 8.53 mL of 0.00949 N Fe+2 solution. The concentration of Fe+2 (56 g/mol) in the sample in parts per million is ___________.
Ca+2 = 36.8mg/L Mg+2 = 2.9mg/L HCO3 = 98mg/L pH = 7.53 Temp = 9C Calculate the following: a. Hardness in units of mg/L as CaCO3 b. Ionic strength (be sure to include H++ and OH--) c. PCO2 in equilibrium with the sample d. Saturation index with respect to calcite (SIC) e. Saturation index with respect to dolomite (SID)
steel A aluminum 2 m B 2 m 9 m bronze с 3 m The assembly shown consists of a steel cylinder (E = 200 GPa, A = 150 mm2,= 12 µm/m-°C), an aluminum alloy cylinder (E = 70 GPa, A = 230 mm2, = 23 µm/m °C), and a hollow bronze tube (E = 100 GPa, A = 190 mm2, = 18 μm/m-°C) welded to the rigid bar at points A, B, and C, respectively. Initially, the system is stress-free. When the assembly is heated by 45°C, determine the normal stress (in MPa) in the bronze tube and the horizontal distance (in m) with reference to point A where the rigid bar tilts. Neglect the weight of the members. The answer should be: Obr = 8.9507 MPa, C, d = 4.6625 m
I need the answer as soon as possible
Provide relevant infomation about the constituents of OPC in the blank cells of the following uble Specific gravity Peroent by weight Rate of S.N Constituent Desity Role Size hydration Tricalcium aluminate Tetracalcium 2 aluminoferite 3 Helite 4 Alite Gypum
1. Which precipitimetric method employes ferric alum
You are designing a 4340 steel shaft that is going to be press fit into an 2014 T6 aluminum housing. The 4340 steel rod has the following properties: E =29 Mpsi, Sy =75 ksi, and the coefficient of thermal expansion (alpha) = 10.8 x 10-6 K^(-1). The 2014 T6 aluminum housing has the following properties: E =10.5 Mpsi, Sy =54 ksi, and the coefficient of thermal expansion (alpha) =23.1 x 10-6 K^(-1). The operating temperatures range from -30F to 400F. Which of the following statements are true? (Note: more than one statement could be true) There is a mismatch between the coefficients of thermal expansion between the steel and aluminum, which could lead to problems in the press fit at cold and high temperatures. The yield strength of the aluminum is less than that of steel, which means the aluminum will behave in a more rigid manner than the steel. The elastic modulus of steel is greater than that of aluminum, meaning that the aluminum will behave in a brittle manner while the steel will…
8 - Which of the following properties is the difference that distinguishes Silica fume from other pozzolan? I. Increases late strengths. II. It increases early strengths. III. It increases the need for water. IV. It increases the temperature of hydration. V. Decreases the heat of hydration. A) I, II, and VB) I and VC) Solo IIID) II, III and IVE) I, II, III