Design possible layout of a laboratory to be equipped with following high voltage equipments. Otherare also supplied :pecifications1. Lightning and Switching Impulse generator :400 kV output voltage, charging voltage per stage = 200 kV,stage capacitor = 1.5 μF, energy = 30 kJ, number of stages = 20,generator height = 15 m, electrode height = 2m.Required clearance :=Lightning 8 m, switching surge = 26 metresgenerator base = 3 metre on side.Power Frequency Transformer :1603 unit cascade, 1500 kV, 1 A, insulated cylinder type,Approximate height = 15 meters,Required clearance = 8 m all around.3. D.C. Generator :2000 kV, 10 mA, Height = 10 m, base 2 metre on side.4. Voltage Divider :Same height as impulse generator.Distance from generator = 20 metres. 20035. Space for Test Object :10 metres along the length of hall.6. Control Room:As annexed to the main hall 15 m x 6 m.homA COMEL

Answered: Image /qna-images/answer/69e7e428-764f-43fc-85f8-f7bdc9de7483.jpg

Desig pecifications are also supplied : 1. Lightning and Switching Impulse generator : 400 kV output voltage, charging voltage per stage = 200 kV, stage capacitor = 1.5 μF, energy = 30 kJ, number of stages = 20, generator height = 15 m, electrode height = 2m. Required clearance : Lightning = 8 m, switching surge = 26 metres generator base = 3 metre on side. 2. Power Frequency Transformer : 3 unit cascade, 1500 kV, 1 A, insulated cylinder type, Approximate height = 15 meters, Required clearance = 8 m all around. 3. D.C. Generator : be equipped with following high voltage equipments. Other 2000 kV, 10 mA, Height = 10 m, base 2 metre on side. 4. Voltage Divider : Same height as impulse generator. Distance from generator = 20 metres. 3 200 5. Space for Test Object : 10 metres along the length of hall. 6. Control Room : As annexed to the main hall 15 m x 6 m. 34 35

Desig pecifications are also supplied : 1. Lightning and Switching Impulse generator : 400 kV output voltage, charging voltage per stage = 200 kV, stage capacitor = 1.5 μF, energy = 30 kJ, number of stages = 20, generator height = 15 m, electrode height = 2m. Required clearance : Lightning = 8 m, switching surge = 26 metres generator base = 3 metre on side. 2. Power Frequency Transformer : 3 unit cascade, 1500 kV, 1 A, insulated cylinder type, Approximate height = 15 meters, Required clearance = 8 m all around. 3. D.C. Generator : be equipped with following high voltage equipments. Other 2000 kV, 10 mA, Height = 10 m, base 2 metre on side. 4. Voltage Divider : Same height as impulse generator. Distance from generator = 20 metres. 3 200 5. Space for Test Object : 10 metres along the length of hall. 6. Control Room : As annexed to the main hall 15 m x 6 m. 34 35

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

VOLTAGE STEP UP THE VOLTAGE TRANSFORMER Done Choose... STEP UP THE CURRENT STEP UP THE VOLTAGE FREQUENCY PHASE DIFFERENCE
A 1100/170V, 50 HZ, 1-phase transformer with cross sectional area of the core is 30 cm? and maximum flux density is 1.5 wb/m2. The number of turns required on the LT side will be
Draw a block diagram of a power supply from transformer up to regulator with corresponding waveform.
Due to the increase in load, what change you saw in the transformer’s output power and voltage regulation?
4. The portion of the flux that goes through one of the transformer coils but not the other one is called. A) Average flux B) Mutual flux D) Leakage flux C) Total flux 5. The fundamental component of the magnetization current ------- the voltage applied to the core by ------ 90°: A) Lags, 45° B) Leads, 45°. D). Leads, 90°. C) Lags, 90°. 6. The ----- are resistive heating losses in the core of the transformer. A) Hysteresis losses. B) Copper losses. C) Leakage flux losses. D) Eddy current losses. 7. The total rotational losses of an induction motor are a combination of: A) Friction losses B) Windage losses. C) Core losses. D) Stray losses. 8. Induction motors are now the preferred A) absence of brushes. choice for industrial motors due to B) Small size. C) Less control requirements. D) rugged construction. 9. For an induction motor, if the synchronous speed is 1800 r/m, and the rotor speed 180rad/sec, then the slip will be: A) 5.5 % C) 6% B) 4.5% D) 4% 10. The lower the speed of an…
4. 100 kVA, 6800-240 V, 50 Hz single phase step down transformer has the following parameters: RLs=0.0082 RHs=2.62 Rfe-HS=50002 XLs=0.015N XHs=5.2N Xm.Hs=88002 Transformer is delivering 80% of rated load at rated voltage and 0.95 lagging power factor. Determine the following: a) The equivalent impedance of the transformer referred to primary. b) Input impedance of the combined transformer and load. c) Actual input voltage at HV side. d) Input impedance if load is disconnected. e) Exciting current at no load.
The required no-load voltage ratio in a 150 kVA single-phase 50 Hz core-type, two-winding transformer is 5000/250 V. Calculate the load kVA for maximum efficiency. The full-load I2R loss is 1800 W and the core loss is 1500 W. Round your answer off to the nearest whole number
The equivalent circuit impedances of a 20-kVA, 8000/240-V, 60-Hz transformer are to be determined. The open-circuit test and the short- circuit test were performed on the primary side of the transformer, and the following data were taken: Open-circuit test (on primary) Short-circuit test (on primary) 8000 V V= 489 V I0.214 A 2.5 A P= 400 W P= 240 W Find the impedances of the approximate equivalent circuit referred to the primary side, and sketch the circuit.
1) A 12 kVA, 4400V/230V, 50 Hz single-phase transformer has 150 secondary turns. Determine (a) the primary and secondary current,(b) the number of primary turns, and (c) the maximum value of the flux.
2. A 4600 to 230 Volts, 60 Hz step down transformer has a core dimension of 3.00 by 4.40 inches. A maximum flux density of 60,000 lines/in^2 is to be used. Assuming a 9% loss of area due to stacking factor of laminations. The number of turns required in the primary is: 240 turns 2397 turns 239.7 turns 23.97 turns
A 3.5 kV / 120V, 50 Hz, single phase transformer is to have an approximate e.m.f per turn of 33V and operate with a maximum flux density of 1.35T. Determine, (a) The number of primary and secondary turns. (b) The cross sectional area of the core.
In a transformer that has 10 times more turns on the secondary side (side 2) than on the primary side (side 1), the magnitude of the voltage/EMF across the windings on the secondary side, E₂ will be... O a.... 10 times lower than the voltage/emf on the primary side, E₁. O b.... the same as the voltage/emf on the primary side. O c.... always zero regardless of the voltage on the primary side, E₁. O d.... 10 times higher than the voltage/emf on the primary side, E₁.