Contracted rectangular crested weir. A contracted rectangular crested weir is one type of sharp crested weir, and is of the options that can be used to meter flow rate in an open channel. The head over the weir is measured and can be used to calculate the water flow rate over the rectangular weir (and through the open channel proach annel B Flow Weir plate Problem: A contracted rectangular sharp-crested weir 2.63 m long discharges water under a head of 87 cm. Compute the flow by using the Francis correction formula. Check by Cone formula

Contracted rectangular crested weir. A contracted rectangular crested weir is one type of sharp crested weir, and is of the options that can be used to meter flow rate in an open channel. The head over the weir is measured and can be used to calculate the water flow rate over the rectangular weir (and through the open channel proach annel B Flow Weir plate Problem: A contracted rectangular sharp-crested weir 2.63 m long discharges water under a head of 87 cm. Compute the flow by using the Francis correction formula. Check by Cone formula

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: ). Find the discharge over a 60-degree V-notch weir if the head is 6.25 inches.

Q: Design a canal culvert 200 meters long to pass a normal full supply discharge of 5 m3/s with 0.3 m…

Q: b. 44.760 d. 79.767 Question 1-A Question 1-B Question 1-C O Question 1-D Question 2-A Question 2-B…

Q: 2. Determine the discharge of the weir having a head of 1.2 m in L/s a) If a 90° triangular weir is…

Q: Q.64 The town of Panipat has a low turbidity raw water and is designing its overflow weir at a…

A: given- overflow rate=180 m3/d/mflow rate=0.6 m3/s

Q: PROBLEM 2: Compute the flow rate over each weir. Assume Cd-0.60 1 ft 0.5 ft 60° weir plate 95cm 75cm…

A: GIVEN DATA:-⇒Cd=0.60⇒θ=60°→Formulae Used:-(1) Flow rate for triangular weir is given by:-⇒…

Q: By placing a broad-crested weir, why we are able to measure discharge in the channel? O All the…

A: Broad Crested weird are used to get discharge in open channel and it also controls depth.

Q: The maximum flow through a 90-degree V-notch weir is 7.0 ft/s. Determine the minimum depth of the…

A: Given: 90-degree V notch, Q = 7.0 ft3/s Determine the min. depth of weir notch, H = ?

Q: A weir has been constructed across a concrete-lined channel with a rectangular cross-section (base…

A: Step 1:Step 2:Step 3: Step 4:

Q: A rectangular weir is doubly contracted with a width of 1.44m and a flow depth of 0.50m above the…

A: The values given in the question are as follows: Width of rectangular notch(B)=1.44 m Flow depth of…

Q: Ozark Underground Laboratory has a 45 triangular weir constructed using 2 thresher blades that can…

A: Given data, Maximum flow Q = 120 cfs Notch angle θ = 45o

Q: The head over a 90° V-notch weir increases from 0.15 m to 0.3 m. The ratio of new discharge to the…

Q: A sharp-crested rectangular weir 1 m long with end contractions suppressed and a 90˚ V-notch weir…

Q: A sharp-crested suppressed rectangular weir 1m long and a standard 90- degree V-notch weir are…

A: Given Length of rectangular weir = 1m

Q: Determine the discharge over a standard contracted weir when the upstream water depth is 2.1 m. The…

A: Step 1

Q: Which of the following statements is TRUE? a. The coefficient of discharge of a broad-crested weir…

Q: A rectangular weir is doubly contracted with a width of 1.35m and a flow depth of 0.39m above the…

Q: What is the discharge over a cipolletti weir of length 3m when head over the weir is 1 m (Cd = 0.62)…

Q: A rectangular weir is designed to span the full width of a rectangular channel with B=L=2.5 m.…

A: Given, L = B = 2.5 m Q = 0.405 m3/s Cd = 0.625

Q: 1. After a heavy downpour the depth of water over the weir is 4 m. If the total discharge through…

A: H = 4 mQ = 1000000 m3

Q: The head over a ?rpezoidal-crested weir, whose breadth is 5m, is 4m. Given that discharge…

A: Given Data: A trapezoidal-crested weir' Head=4m Breadth=5m Coefficient of Discharge=1.8 It is…

Q: 1. On a 90-degree triangle weir, the measuring head of water is 600 mm. What length of Cipolletti…

A: Given Data:90° triangular weirθ = 90°water head = 600mm=0.6m

Q: Show complete solution. What length of Cipolletti weir should be constructed so that the head will…

A: What length of Cipolletti weir should be constructed so that the head will be 3.75 ft when the…

Q: A contracted measurement weir is to be installed in a 22-ft-wide channel. The depth of the weir…

A: Given data : Width of channel = 22 ft Depth of weir opening = 16 inches Average flow = 6 MGD Minimum…

Q: A sharp-crested weir is required in a rectangular channel of width =1.5 m. How high (in m) should…

Q: What length of a Cipolletti weir should be constructed in order that the head of flow will be 0.96m…

Q: gular Weir, L = 5.55 m., Cd = 0.996 1.816 c. 44.303 3.683 d. 44.033 ular Weir, 0 = 66°, Cd = 0.904…

Q: A weir is to be installed to measure a flow of 0.80 m3/s. If the maximum (total) depth of water that…

A: Given Q = 0.8 m^3/s w = 4 m total height = 1 m

Q: 22. Situation 8 - Different types of weirs are to be tested to determine the discharge for a head of…

Q: A 90° V-notch weir is used to measure the discharge from a spring. What is the (a) theoretical…

Q: A rectangular, sharp crested weir width is 1.5m long, How high should the weir be placed in a…

Concept explainers

Highway Drainage

Highway drainage is the process of extracting and regulating the excess surface water on the pavement by giving the desired slope. The construction of a highway drain helps to divert the water present on the surface, and sub-grade by the means of slope. Highway drainage systems are a necessary part of smooth functioning of traffic, since the highway drainage systems provide proper disposal of unwanted substances from the highways.

Question

Contracted rectangular crested weir.
A contracted rectangular crested weir is one type of sharp crested weir, and is of the
options that can be used to meter flow rate in an open channel. The head over the
weir is measured and can be used to calculate the water flow rate over the
rectangular weir (and through the open channel
proach
annel
в
Flow
Weir
plate
Problem:
A contracted rectangular sharp-crested weir 2.63 m long discharges water under a head
of 87 cm. Compute the flow by using the Francis correction formula. Check by Cone
formula.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A channel carrying 105.86 ft³/s. Assuming that an error of 0.05904 in is made in measuring the head, determine the resulting percentage of error in discharge. (a) If a 90º triangular weir is used. (b) If a Cipolletti Weir 10ft long is used. Draw the sketch
The Peripheral overflow weir of a settling tank has 60 identical 90 degree V notch weirs, all set in the same apex level.if the daily flow rate is 1296m3 fine the flow over an individual V notch in L/s
A rectangular, sharp-crested weir with end contractions is 1.4 m long. How high should itbe placed in a channel to maintain an upstream depth of 2.35 m for 0.40 m³/s flow
A circular settling basin is anticipated to receive a flow of 3.5 MGD. The tank is to be designed to have an overflow rate of 800 gpd/ft2. The depth is to be 11 ft. Determine the diameter of the basin (in feet). ? What length of weir (ft) is required to achieve a weir loading of 15,000 gpd/ft show all work
Choose the letter of the correct answer. Please answer honestly and do not just guess. Develop a formula for the discharge over a 90° V-notch weir in terms of head above the bottom of the V. A channel conveys 300 litres/sec of water. At the outlet end there is a 90° V-notch weir for which the coefficient of discharge is 0.58. At what distance above the bottom of the channel should the weir be placed in order to make the depth in the channel 1.30m? a. 0.759 m c. 0.769 m b. 0.749 m d. None of the above From above question, with the weir in this position what is the depth of water in the Cchannel when the flow is 200 litres/sec? a. 1.218 m b. 1.212 m c. 1.232 m d. None of the above It is desired to use the 32 in. pump at 1170 rpm to pump water at 60°C from one reservoir to another 120 ft higher through 1500 ft of 16 in. ID pipe with f = 0.030. Determine the Q. a. 15,000 gpm c. 16,000 gpm 3 b. 15,500 gpm d. None of the above
Water in a 20-ft-wide rectangular channel, flowing at120 ft3/s and a depth of 10 ft, is to be metered by arectangular weir with side contractions, as in Table 10.2b.Suggest some appropriate design values of b, Y, and H tomatch the table conditions for this weir.
A sharp-crested suppressed rectangular weir 1m long and a standard 90- degree V-notch weir are placed in the same weir box with the vertex of the V- notch weir 150mm below the crest of the rectangular weir. Determine the head on the rectangular weir. Determine the head on the rectangular weir when their discharges are equal. Use Francis Formula.
A 70-degree V-notch weir is observed to have a 40-mm head. Estimate the flow rate over the weir. Assume 20°C. (Expected answer range: 0.300 L/s
I need the answer as soon as possible