Consider an a.c circuit supplied by 220V at 50HZ. The circuit consists of only two inductors, L1 and L2 with inductive reactances of 12 Ohms and 2 Ohms respectively. Calculate the current flowing around the circuit for two cases: (1) L1 and L2 are connected in series, (2) L1 and L2 are connected in parallel

Consider an a.c circuit supplied by 220V at 50HZ. The circuit consists of only two inductors, L1 and L2 with inductive reactances of 12 Ohms and 2 Ohms respectively. Calculate the current flowing around the circuit for two cases: (1) L1 and L2 are connected in series, (2) L1 and L2 are connected in parallel

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Figure 2 shows three "LC" circuits, two of them with capacitance capacitors "C" and the three with inductance coils "L", the three circuits are coupled by means of two capacitance capacitors "Cc". The currents that circulate through each mesh are those indicated in the figure: "I1", "I2" and "I3". Using Kirchhoff's law for voltages and taking into account the definition of current I = −dQ / dt, find the system of coupled equations of the system and then find the normal angular frequencies of the system.
PROBLEM 1: In a series R-L circuit the p.d. across the resistance R is 16V and the p.d. across the inductance L is 6V. Find the supply voltage and the phase angle between current and voltage.
A 40-microfarad capacitor is connected in parallel with a 40-ohm resistor. What is the real power drawn when source voltage is V = 220 sin100t V?
A resistance 120 Q and a capacitance 15 µF are connected in series across a 240 V, 50 Hz a.c. supply. Calculate (a) the circuit impedance (b) the voltage across the resistance (c) the voltage across the capacitor and (d) phase angle in degrees.
The type of the load whose current and voltage phasors are as shown in the phaser diagram is Im 90° - Re Pure capacitive load non-pure Inductive load Purse resistive load O Pure inductive load non-pure capacitive load
1) Two identical voltage waveforms of difference phase angles are shown in Figure B. Write down the expression of waveforms A and B clearly. HUS Voltage (V) 8 0 K/N B 7: ST ot
Find: a. Branch currentsb. Total current drawn by the circuitc. Total power drawn by the circuitd. Total power factor of the circuit Please show complete solution and draw the circuit diagram. Please round off answers up to the 3rd decimal places. Thank you!
Kindly draw the circuit and diagram for this problem and solve step by step process. Thanks and it will help a lot. Have a nice day expert!
An emergency power supply is required to provide a three-phase sinusoi- dal voltage source of 208 V (L-L) at a frequency of 400 Hz. The power is to be obtained from a battery consisting of cells in series, each cell hav- ing an internal voltage of 2.2 V and an internal resistance of 0.006 m. The load on the three-phase, 400-Hz system requires a fundamental fre- quency apparent power of 7.2 kVA at 0.9 power factor lagging. The in- ductance of the load is such that harmonic currents are negligible. How many cells should be connected in series to provide the required output? The switches may be regarded as ideal.
A 6-ohm resistor is connected in parallel with a 300 uF capacitor and the circuit is supplied by a 10A 60Hz current source. Find the instantaneous current through the resistor and the capacitor.
A resistance R. an inductancel =0.01H and a capacitance C are connected is series. When an alternating valtage v = 400 sin (3000t - 20°) is applied to the series combination the current flowing is 10/2sin(3000t -65°).Find the values of Rand C.
An inductive impedance made up of a resistor and an inductor has the characteristic that its currentadvances in phase to the voltage at the impedance A) lags in phase with the voltage across the impedance B) is in phase with the voltage across the impedance. C) None of the above