Consider a reciprocating air compressor with 3-stage, 7.1 m/min free air delivery at atmospheric conditions of 139 kPa and 20 °C, respectively. The polytropic compression index is 1.33, while the delivery pressure is 1,505 kPa. The mechanical and motor-drive efficiencies are 78% and 92%, respectively. Accept complete inter-cooling and neglect clearance volumes. If the specific heat capacity of air at constant pressure and volume are 1.008 kJ/kg K and 0.714 kJ/kg K, respectively. Calculate the input power required to drive the compressor in kilo unit to 1 decimal place. Provide units in the answer.

Consider a reciprocating air compressor with 3-stage, 7.1 m/min free air delivery at atmospheric conditions of 139 kPa and 20 °C, respectively. The polytropic compression index is 1.33, while the delivery pressure is 1,505 kPa. The mechanical and motor-drive efficiencies are 78% and 92%, respectively. Accept complete inter-cooling and neglect clearance volumes. If the specific heat capacity of air at constant pressure and volume are 1.008 kJ/kg K and 0.714 kJ/kg K, respectively. Calculate the input power required to drive the compressor in kilo unit to 1 decimal place. Provide units in the answer.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An ideal single stage air compressor without clearance takes in air at 105KPa with temperature of 15degC and delivered it at 413KPa after isentropic compression. What is the work done by the compressor in KJ/kg? complete solution tnx.
Determine the mean effective pressure in kPa of a certain air -standard Diesel cycle which has a compression ratio of 16 and a cutoff ratio of 2. At the beginning of the compression process, the pressure and temperature of air is at 95,000 Pa and 300K, respectively. Roun-off your answer into two decimal places. hint: Linear Interpolation equation Y1 - Yo Yo (21 – æ) + Y1 (x – xo) | y = Yo + (x – co): *1 - 20 |
Q3//A// In a gas turbine plant compression is carried out in one stage and expansion in one stage turbine. If the maximum temperature (T3K) and minimum temperature (T,K) in the cycle remain constant, show that for maximum work of the plant, the pressure ratio is given by:
4. A two-stage air compressor with an intercooler takes in air at 14.6 psia at 62 degree F anddelivers it at 502 psia. The temperature of the air leaving the intercooler is 62 degree F.Calculate the work required per pound of air delivered if compression isisentropic, ft-lbf/lbA. (-)108,072 ft-lbf/lb C. (-)168,072 ft-lbf/lbB. (-)118,072 ft-lbf/lb D. (-)128,072 ft-lbf/lb
Temperature, Pressure and Volume of air (Y=1.4) at the end of isentropic compression in an air standard Carnot heat engine cycle are 315.6 °C, 120 kPa and 0.05 m³ respectively. The volumetric ratio of the isothermal expansion (2-3) and that of isothermal compression ( V₁ ¹₁-3). The volumetric ratio the isentropic expansion (¹-6) and that of isothermal V/₂ compression (¹= 6). (Please draw a P-V diagram of the Carnot cycle) V₁ Calculate; a) The pressure, minimum Temperature and volumes of other states of the Carnot cycle. [ + b) The heat supplied and rejected by the cycle c) The efficiency of the cycle 星

A four-stage single-acting air compressor running in an atmospheric at 87 kPa and 15°C has a F.A.D of 2.83 m³/min. The section pressure and temperature are 80 kPa and 32 °C respectively, the delivery pressure is to be 7 MPa. The temperature at the start of compression in each stage is 32 °C, take n=1.3 for all stages. calculate: 1. The intermidiate pressure ratio 2. The intermidiate pressure at first, second and third stages in kPa
An air standard gas turbine engine operates on an overall pressure ratio of 4 and between the temperature limits of 70 F and 1600 F. The efficiencies of compressor and turbine are 0.82 and 0.92, respectively. To modify, a regenerator of effectiveness 0.65 is added. (a) Assuming constant specific heats, evaluate the compressor work (b) calculate the thermal efficiency Show complete solution on a paper.
Consider a reciprocating air compressor with two-stage, 8.3 m/min free air delivery at atmospheric conditions of 110 kPa and 24 °C, respectively. The polytropic compression index is 1.22, while the delivery pressure is 1,805 kPa. The mechanical and motor-drive efficiencies are 85% and 93%, respectively. Accept complete inter-cooling and neglect clearance volumes. If the specific heat capacity of air at constant pressure and volume are 1.007 kJ/kg K and 0.714 kJ/kg K, respectively. Calculate the rate of heat rejected in the intercooler kilowatts to 1 decimal place. Insert the unit symbol.
There are compressed 11.33 m3/min of air from 103.42 kPa, 26.7°C to 827.36 kPa. All clearances are 8%. (a) Find the isentropic power and piston displacement required for a single stage compression. (b) Using the same data, find the minimum ideal power for two-stage compression when the intercooler cools the air to the initial temperature . (c) Find the displacement of each cylinder for the conditions of part (b). (d) How much heat is exchanged in the intercooler? (e) For a compressor efficiency of 78%, what driving motor output is required?
The initial pressure and temperature of air in an Otto cycle engine during compression are 90 kPa and 12°C. Determine the maximum pressure occurring in the cycle if the initial and final temperature during heat addition process are 350°C and 1250°C, and the compression ratio is 6. Please complete the answer for good feedback.?