Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI). · Use Cisco IOS commands to specify or limit access to the device configurations. · Use IOS commands to save the running configuration. · Configure two host devices with IP addresses. · Verify connectivity between the two PC end devices.
| Device | Interface | IP Address | Subnet Mask |
| Class-A | VLAN 1 | 128.107.20.10 | 255.255.255.0 |
| Class-B | VLAN 1 | 128.107.20.10 | 255.255.255.0 |
| Student-1 | NIC | 128.107.20.10 | 255.255.255.0 |
| Student-2 | NIC | 128.107.20.10 | 255.255.255.0 |
Objectives
· Configure hostnames and IP addresses on two Cisco Internetwork
· Use Cisco IOS commands to specify or limit access to the device configurations.
· Use IOS commands to save the running configuration.
· Configure two host devices with IP addresses.
· Verify connectivity between the two PC end devices.
Scenario
As a recently hired LAN technician, your network manager has asked you to demonstrate your ability to configure a small LAN. Your tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. You are to use two switches and two hosts/PCs on a cabled and powered network.
Instructions
Configure the devices to fulfill the requirements below.
Requirements
· Use a console connection to access each switch.
· Name Class-A and Class-B switches.
· Use the xAw6k password for all lines.
· Use the 6EBUp secret password.
· Encrypt all clear text passwords.
· Configure an appropriate message-of-the-day (MOTD) banner.
· Configure addressing for all devices according to the Addressing Table.
· Save your configurations.
· Verify connectivity between all devices.
Note: Click Check Results to see your progress. Click Reset Activity to generate a new set of requirements. If you click on this before you complete the activity, all configurations will be lost.
ID: 0202
Trending now
This is a popular solution!
Step by step
Solved in 3 steps with 4 images
