A triangular beamhaving a base width of310 mm has a totaldepth of 838 mm. It isreinforced with 3-16mmbars placed at 70mm(steel cover) above thebottom of the beam.f'c-22.96 MPa, fy=275MPa. Use fc (allow) ==0.45f'c and fs(allow) =0.5fy. Use unit weight ofconcrete = 24 kN/m³. Calculate the maximumuniform live load thatthe beam can carry for asimple span of 5.64meters. Use WSD.

The values given in the question are as follows: Width of beam(b)=310 mm Total depth of beam(D)=838…

Answered: Calculate the maximum uniform live load…

Engineering

Civil Engineering

Calculate the maximum uniform live load that the beam can carry for a simple span of 5.64 meters. Use WSD.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Determine the safe uniform live load that the beam can carry on a simple span of "L" meters with the…

A: Given, Width of beam b=330 mm Depth of beam h=500 mm Clear cover =65 mm f'c=35 MPafy=414 MPaL= 7.5…

Q: Beams A beam 300 mm depth and of symmetrical I section has a l = 1 x 108 mm4 and is simply supported…

A: Given- Beam depth d=300 mm, Symmetrical I-section- I=1×108 mm4, Span L=6 m, Maximum Bending stress…

Q: Determine the lightest W shape beam for the loaded beam shown if the allowable flexural stress in…

A: Determine lightest W shape beam for the loaded beam

Q: Calculate the ultimate moment capacity of a rectangular beam with b = 350mm, d = 540mm, A, =7- 28mm.…

A: Given, b=350 mm d=540mm As=7-28 mm f'c= 24 MPa fy=345 MPa

Q: WHICH SECTION BEAM WILL BE STRONGER

Q: # 3: Analyze the beam 6 kN 1 kN/m 3 KN shown in beam below and draw the bending moment and shear…

A: The loads acting on beam are given . Note According to the company rules i am able to answer first…

Q: Compute the magnitude (kN) and type (compression or tension) of the force member OG, PQ, HP, FG, GH,…

Q: Determine the minimum height h of the beam shown in Figure if the flexural stress is not to exceed…

A: Maximum Flexural stress= 20MPa

Q: 1. A 100mm x 200mm timber beam has a span of 4.0m and carries a uniform load of 15kN/m. including…

A: Given data, Span of beam, L = 4 m Uniform distributed load acting on the beam, w = 15 kN/m Depth of…

Q: ode or the latest NSCP 2015 , fy = 414 Mpa and fc’ = 20.7 Mpa.

A: By limit state method Calculate the maximum depth of neutral axis…

Q: AW14 x 68 is used as a beam having a simple span of 6 m. Properties of WF Section. d = 356.62 mm %3D…

A: Answer We know that deflection for a simply supported beam carrying uniform load is given by…

Q: The beam below supports 2 hanging service loads from its bottom flange as shown below. Select the…

Q: Cantilever beam is rectrangular in section having (80 mm width) and (120 mm depth). If the…

A: Given: Width of beam, b = 80 mm Depth of beam, d = 120 mm Point load, P = 6 kN Maximum bending…

Q: For the continuous beam shown, determine the plastic moment capacity. L1 = 6 m, L2 = 3 m, L3 = 3 m,…

Q: Draw S.F.D and B.M.D for the beam shown in figure below : *

A: For the reactions - From the hinge span is divided in two parts i.e. CD as one and ABC or ABE as…

Q: a. Determine the slenderness ratio, above which the beam is long with respect to lateral buckling.…

Q: Practice Problem 1 A steel beam having a simple span of 8 m is subjected to a moment M at the left…

A: Given Width of flange,bf = 210 mm Thickness of Flange , tf = 16 mm

Q: Calculate the force carried by a brace in the concrete wall form shown below. Consider the wall form…

A: The force carried by the brace on concrete wall is given by F ;where ;Wind load = 20 psfHeight = 12…

Q: A section is given below. the beam has a span of 4m with Fy= 2 50 MPa. Compute For the Following:…

A: Given data Fy = 250 MPa Length of beam(L) = 4m Elastic modulus section (Z) =? Plastic modulus…

Q: problem : Check whether the depth of a cantilever beam in the following dequate for controlling…

Q: Calculate the plastic moment strength about the strong axis of a built-up I-beam with flange plates…

Q: From the beam shown, determine the maximum shear force and maximum bending moment. 4KN/m 5KN/m 1m 4m…

A: Determine the support reactions. The following figure shows the Free Body Diagram of the beam. The…

Q: Two wood beams, each of rectangular cross section (3.0 in. x 4.0 in., actual dimensions), are glued…

A: Given, Cross section 3in x 4in Length = 8 ft or 96 in γwood = 35 pcf

Q: The ratio of the deflections of the free end of a cantilever due to an isolated load at 1/3rd and…

Q: 2. Design the beam for the loads shown in the figure using A 992 steel. Lateral bracing is provided…

A: For A992 steel fy = 50ksi We will use ASD method

Q: The beam shown in the figure is a two-span beam with a pin (hinge) in the center of the left span,…

A: We need to find the maximum Moment on the beam and compare it with the W 12 x 79 beam Moment…

Q: Determine the reaction forces for beams B-1, B-2, and B-3. Column A Column B Girder G-1 open Girder…

Q: A W30x99 hot-rolled structural steel wide-flange shape is used as a simply supported beam on a span…

A: Superimposed load = 4 Kips/ft Determine the maximum bending stress.

Q: Use LRFD and determine the flange and web dimensions for a plate girder of the type shown in Figure…

A: Given:- Span length =50 ft lateral bracing at 12 ft-6 in. intervals Superimposed service dead load…

Q: An existing beam shown carries an 8-ft high wall. It will be renovated and be replaced with the ff…

A: To find:The load that the beam will carry in kN/m

Q: A simply supported beam spans 20-ft. It supports a UDL of 3 k/ft and a concentrated load of 100 k at…

A: Span of simply supported beam(L)=20 ft or 240 in. UDL(w)=3 k/ft Concentrated load(P)=100 k Maximum…

Q: In beam test what is the advantage of a third point loading instead of using a single load in the…

A: Please refer the attached image for complete solution.

Q: Consider the arrangement of beams and girders that are used to support a 5 in reinforced concrete…

A: Given Data: To design the beam and girder, data is given as: Live load=80psfConcrete…

Q: code limitation of L/240. 3/ If maximum deflecti

Q: Chemical Engineering .1. Calculate the ultimate load of a propped cantilever, span L, carrying a UDL…

Q: Two wood beams, each of rectangular cross section (3.0 in. x 4.0 in., actual dimensions), are glued…

A: fa = 175psi (given) Sx = bd2/6 = 4x62/6 = 24in3 fa = M/Sx or, M = fa x Sx

Q: Q1 // For cantilever beam shown in Fig. below if service live load = 72 kN/m, service dead load = 30…

Q: analysis of beam in the given structure. Dete minate before doing analysis.

Q: A beam is simply supported and has a span of 12 m. The beam is a W33x240 with Ex-345 MPa. Compute…

A: Answer We are given unsupported length of the beam Lb = 12 m In order to calculate uniformly…

Q: A column is made of two Channel sections as shown. They are latticed together by light diagonal…

Concept explainers

Bars

In civil engineering, bars refer to steel reinforcement bars or rebars. These are structural members primarily used for reinforcement purposes in masonry works. A bar is characterized by its cross-sectional area, which is negligible compared to its length. Bars are usually manufactured by steel which is uniform throughout the length, or by meshing multiple steel wires. Other materials of the bar include carbon steel, glass fiber, carbon fiber, and basalt fiber. The reinforcing bars are coated with epoxy resins and other materials to enhance some of their properties including corrosion resistance.

Question

100%

A triangular beam
having a base width of
310 mm has a total
depth of 838 mm. It is
reinforced with 3-16mm
bars placed at 70mm
(steel cover) above the
bottom of the beam.
f'c-22.96 MPa, fy=275
MPa. Use fc (allow) =
=
0.45f'c and fs(allow) =
0.5fy. Use unit weight of
concrete = 24 kN/m³.

Calculate the maximum
uniform live load that
the beam can carry for a
simple span of 5.64
meters. Use WSD.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Given data:

VIEW

Calculating maximum uniform live load that the beam can carry:

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Please help
learn Determine the reaction forces for beams B-1, B-2, and B-3. Column A Column B Girder G-1 open Girder G-2 L1 L1 L1 • Live load = 30 psf • Dead load: (1) Slab = 50 psf, (2) Deck = 5 psf, (3) Mechanical equipment = 13 psf, (4) Suspended ceiling = 8 psf, (5) Beam = 25 Ib/ft, (6) Girder 35 lb/ft • Beam and Girder spacing: : (1) L1 = 14 ft, (2) L2 = 10 ft, (3) L3 = 10 ft Please round to the nearest one. Reaction force for Beam B-1 (one side only) = Ibs Reaction force for Beam B-2 (one side only) = Ibs Reaction force for Beam B-3 (open side) = Ibs Reaction force for Beam B-3 (Girder G-1 side) = Ibs MacBook Air II F8 F1 F2 F3 F4 F5 F6 F7 $ % & * 2 3 4 5 6 7 8 Beam B-1 Beam B-2 Beam B-3 Beam B-4 L3 L2
A beam is simply supported and has a span of 12 m. The beam is a W33×240 with Ey=345 MPa. Compute the allowable (ASD) and ultimate (LRFD) uniformly distributed load that can be safely carried by the beam including its weight: A. If the length of the beam is 14m and the compression flange has lateral supports only at its ends and the midspan. Express your answer in N/m. (ASD) B. If the length of the beam is 14m and the compression flange has lateral supports only at its ends and the midspan. Express your answer in kN/m. (LRFD)| (Ctrl) Properties of W33×240: Weight = 3.51 kN/m tw = 21.08 mm x = 352.54 mm A = 45,548 mm? Ix = 5,660.75 × 10® mmª ry = 92.34 mm d = 850.9 mm ly = 388.34 × 10® mm Jc = 14.51 x 106 mm* bị = 402.97 mm Sx = 13,322.68 × 10° mm3 ris = 105.92 mm %3D t = 35.56 mm Sy = 1,933.67 x 10° mm3 %3D
Need some help with the question
Considering the frame, the height of each storey is 5 m (DA) and 4m (DG) , the length of each span is 6 m (GH) and 7 m (HI), assuming columns and beams have the same cross sectional areas. *Using the cantilever method, what is the axial force at column FC?
A W36x210 can be used for Transfer Girder ‘A’ as shown in the elevation next page.Assume the LRFD loads on the ‘Transfer Girder’ are as follows:Pu= 200 kips from the column above. Assume also that the loads from self-weight of thewu = 2.0 kip/ft (girder self weight and beams framing into this transfer girder are equivalentto a uniformly distributed load). These loads are shown in the last figure.a) Check whether the W36x210 ‘Transfer Girder’ is adequate for bending and shear.Assume the unbraced length Lb =20 ft.b) Suppose that service loads, w and P, are both 50% dead load and 50% live load. Does theW36x210 satisfy a service live load deflection limit of L/480?
Considering the frame, the height of each storey is 5 m (DA) and 4m (DG) , the length of each span is 6 m (GH) and 7 m (HI), assuming columns and beams have the same cross sectional areas. *Using portal method, what is the axial force at column FC?
What is the value of kip/ft of the uniform load on beam B1 ? What is the value in kips of the point load in the middle of Girder G1 ? What is the value in kips of the point load in the middle of Girder G2 ? What is the value in kips of the axial force in Column C2 on the first storey ?
l8
(Past Board Exam Problem) A beam is simply supported on a span of 5meters and carries the following loads: Superimposed dead load = 26 kN/m Live Load = 14 kN/m Properties b=300mm d=380mm h=450mm f'c=30MPA fy=415MPA L=5m Specific Gravity=2.4 Determine the following: a) Maximum Moment at ultimate condition (kN-m) b) Find the number of 16mm bars required if the design moment at ultimate loads is 200 kN-m c) If the beam carries an ultimate concentrated load of 50 kN at midspan, what is the number of 16mm bars required
A column is made of two Channel sections as shown. They are latticed together by light diagonal bracing. The bracing prevents them from moving independently of each other however it does not itself add to the inertia properties. The column is 480" long and is Ball and Socket supported on each end. The column is A36 steel with E = 29,000 ksi. Determine the largest axial compressive load that can be supported with a safety factor of 2.
need asap auto like