C1 (a). A lubricating oil having the dynamicviscosity of 0.052 poise and kinematic viscosity of0.19 stokes. Calculate (i) the density of oil in kg/m³,(ii) the weight density of oil in N/m³,(iii) the specificgravity, and (iv) the specific volume in m3/kg. (4Marks)C1 (b). Calculate the capillary effect in mm in aglass tube of 4.2 mm diameter, when immersed in(1) water (2) mercury. The values of surfacetension in contact with air are 0.0771 N/m and 0.64N/m respectively. The contact angle for water =0°and mercury =130°. (3 Marks)(Enter only the values by referring to the unitgiven. Also, upload the handwritten answers inthe link provided)C1(a).(i).The density of oil in kg/m³ AkC1(a). (ii) the weight density of oil in N/m3C1(a). (iii) the specific gravityC1(a). (iv) the specific volume in m3/kgC1 (b). 1.The capillary effect (water) in mmC1 (b). 2.The capillary effect (mercury) in mm

As per bartleby guidelines we are allowed to solve only 1st 3 subpart of a question. Please post…

C1 (a). A lubricating oil having the dynamic viscosity of 0.052 poise and kinematic viscosity of 0.19 stokes. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (i) the specific

C1 (a). A lubricating oil having the dynamic viscosity of 0.052 poise and kinematic viscosity of 0.19 stokes. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (i) the specific

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

C1 (a). A lubricating oil having the dynamic viscosity of 0.051 poise and specific gravity of 1.12. Calculate (i) the density of oil in kg/m³, (ii) the weight density of oil in N/m3, (iii) the kinematic viscosity in stokes, and (iv) the specific volume in m3/kg. C
A plate 0.05mm distance from a fixed plate moves at 1.25 m/s and required a force per unit area of 3 Pa to maintain this speed by using an oil of specific gravity 0.65. Find the dynamic viscosity in centipoise and kinematic viscosity in stokes of the fluid between the plates. Calculate the specific weight in kN/m³, density, and the specific gravity of a liquid having a volume of 662900 cm and weight of 55 kN
The viscosity of motor oil is 4.79× 10-³ N. s/m², motor oil is used as a lubricant between two machine parts. The variation in velocity of the oil is 1.6 m/s and a maximum shear stress is 62.8 N/m². What is the required spacing between machine parts in millimeter?
Ex. The force required to tow a 1:30scale model of a motor boat in a lake at a speed of 2m/s is 0.5 N, Assuming that the viscosity resistance due to water and air is negligible in comparison with the wave resistance, calculate the corresponding speed of the prototype for dynamically similar conditions. What would be the force required to propel the prptype at that velocity in the same lake? Ans.: 10.95m/s, 13500N
The dynamic viscosity of water is 0.001 N-s/m2. Determine the kinematic viscosity in English system. Calculate the equivalent kinematic viscosity in stokes. (Hint: 1 stoke = 1 cm2/s) Answer the situations with complete solutions. Write your final answer in two decimal places. please input the correct unit and box final answer thank you
A- Womersley number (a) of a human aorta is 20 and for the rabbit aorta is 17, the blood density is approximately the same across the species. The values of viscosity were 0.0035 Ns/m² for the human and 0.0040 Ns/m² for the rabbit. The diameter of the aorta is 2.0 cm for the man, and 0.7 cm for the rabbit, estimate the heart rate beats per minute (bpm) for both species
What is the principle involved in measuring Kinematic and Dynamic viscosity of oil using Saybolt viscosity? How is falling of sphere method differ from Saybolt Universal viscosimeter?
Determine the kinematic viscosity (Stokes) of oil having the relative density as 0.91. The shear stress at a point in oil is 1.51 N/m² and the velocity gradient at that point is 0.31 per second. Solution: (i) Viscosity (in Ns/m²) = (ii) Dynamic Viscosity (in poise) = (iii) Mass density of oil (in kg/m³) = iv) Kinematic viscosity (in stokes) =
An airplane that has a cross-sectional diameter D = 4 m of the front portion is to fly at a speed of 600 km/hr in air that has a density of 1.1 kg/m and dynamic viscosity of 1.27 x 10 Pa.s. A small size model of scale ratio (1/17) to be tested in a different fluid that has a dynamic viscosity 5 x 105 Pa .s and a density of 500 kg/m2. It is determined that the parameters that are important for this test are: diameter D, density, viscosity, velocity V, the length of the wings L and the drag force F. What must be the speed (m/s) of the model to Choose... ensure dynamical similitude? What must be the corresponding diameter of the model (cm)? Choose.. What is the number/s of dimensionless groups for this problem? Choose...
The kinematic viscosity of and specific gravity of a liquid are 3.5 x 10-4 m^2 /s and 0.79, respectively. What is the dynamic viscosity of the liquid in N-s/m^2?
C1 (a). A lubricating oil having the dynamic viscosity of 0.051 poise and specific gravity of 1.12. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (iii) the kinematic viscosity in stokes, and (iv) the specific volume in m3/kg. (