c) Two capacitors A and B are connected in series across a 100V supply and it is observed that the p.ds across them 60V and 40V respectively. A capacitor of 2µF capacitance is now connected in parallel with A and the p.d across B rises to 90V. Calculate the capacitance of A and B in microfarads d) If 2µA of current flows through a component for 5ms, what will be the charge in that component?

c) Two capacitors A and B are connected in series across a 100V supply and it is observed that the p.ds across them 60V and 40V respectively. A capacitor of 2µF capacitance is now connected in parallel with A and the p.d across B rises to 90V. Calculate the capacitance of A and B in microfarads d) If 2µA of current flows through a component for 5ms, what will be the charge in that component?

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter10: Direct-current Circuits

Section: Chapter Questions

Problem 10.6CYU: Check Your Understanding In considering the following schematic and the power supplied and consumed...

See similar textbooks

Similar questions

Check Your Understanding In considering the following schematic and the power supplied and consumed by a circuit, will a voltage source always provide power to the circuit, or can a voltage source consume power?
the voltage across a 3.71uf capacitor in a tv circuit is 4.54 mV. Find the voltage after 0.563ms if a current is given below (in uA) further changes the capacitor. i= (1+6t)^(1/3) The voltage at t = 0.563 ms is _________ mV. I have no clue on the steps to solve such a problem help would be greatly appreciated
A large capacitor of 3000 µF is charged by a constant current. After 1 minute it reaches a voltageof 100 V. At that voltage, the charging circuit is disconnected.a) Calculate the charging current.b) A second identical capacitor is connected across the capacitor, using wires with 1 kΩ resistance. Sketch a graph of the voltages on the two capacitors as a function of time, withappropriate numbers and units marked on the axes.
Do it asap
Plz provide the solution
A 93uF capacitor Initially uncharged, is connected in a series with a 7kO resistor, and this combination is connected across and ideal 12V DC battery. As the capacitor charges, What is the current in the circuit as the capacitor reaches 17% of it maximum charge. What is the voltage across the resister when the capacitor is 17% charhed. How much charge is accumilated on the capacitor after three times constants
A 2.00-nF capacitor with an initial charge of 4.01 µC is discharged through a 1.02-kn resistor. (a) Calculate the current in the resistor 9.00 us after the resistor connected across the terminals of the capacitor. (Let the positive direction of the current be define such that > 0.) mA (b) What charge remains on the capacitor after 8.00 us? (c) What is the (magnitude of the) maximum current in the resistor?
A large capacitor of 3000 µF is charged by a constant current. After 1 minute it reaches a voltage of 100 V. At that voltage, the charging circuit is disconnected. a) Calculate the charging current. b) A second identical capacitor is connected across the capacitor, using wires with 1 kN re- sistance. Sketch a graph of the voltages on the two capacitors as a function of time, with appropriate numbers and units marked on the axes.
To measured unknown resistor by ammeter and voltmeter method. A voltmeter of sensitivity 10002/V,and Half scale 100V connect in parallel with the resistor reads 100V on its full| scale (range),while the series ammeter read 5mA. Calculate the apparent value of the resistor, actual value, and the error.
. In the figure shown the total resistance is 30 kN, and battery's emf is 18 V. If the time constant to be 12.0 µs, calculate (a) the total capacitance of the circuit, (b) the maximum charge to capacitor to acquire, (c) What is voltage across the capacitor, at the instant, the voltage across the resistor is 12 V? (d) What is the current in the circuit expected to be at this instantand (e) What is the time it takes for the voltage across the resistor to reach 12.0 V after the switch is closed? ww
A 2.00-nF capacitor with an initial charge of 5.30 μC is discharged through a 1.19-kn resistor. (a) Calculate the magnitude of the current in the resistor 9.00 us after the resistor is connected across the terminals of the capacitor. 50.74 mA (b) What charge remains on the capacitor after 8.00 µs? 1.8e-7 X Your response differs significantly from the correct answer. Rework your solution from the beginning and check each step carefully. μC (c) What is the maximum current in the resistor? 2.2269 A Need Help? Read It Watch It
A 2.00-nF capacitor with an initial charge of 4.68 µC is discharged through a 1.24-k2 resistor. (a) Calculate the magnitude of the current in the resistor 9.00 us after the resistor is connected across the terminals of the capacitor. mA (b) What charge remains on the capacitor after 8.00 us? (c) What is the maximum current in the resistor?