a damper, the frequency of oscillation is found tothe stiffness of the spring is 1 kN/m. By introducingcoefficient of the damper?be 90% of the original value. What is the dampingIn a spring-mass system, the mass is 0.1 kg andthe stiffness of the spring is 1 kN/m. By introducingbe 90% of the original value. What is the damping(a) 1.2 Ns/m(b) 3.4 Ns/m(c) 8.7 Ns/m(d) 12.0 Ns/m

be 90% of the original value. What is the damping the stiffness of the spring is 1 kN/m. By introducing In a spring-mass system, the mass is 0.1 kg and the stiffness of the spring is 1 kN/m. By introducing a damper, the frequency of oscillation is found to be 90% of the original value. What is the damping coefficient of the damper?

be 90% of the original value. What is the damping the stiffness of the spring is 1 kN/m. By introducing In a spring-mass system, the mass is 0.1 kg and the stiffness of the spring is 1 kN/m. By introducing a damper, the frequency of oscillation is found to be 90% of the original value. What is the damping coefficient of the damper?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: 1) A 45 kg machine is mounted on four parallel springs each of stiffness 2x10^5 N/m and a damping…

Q: 12. A torsional pendulum has a natural frequency of 200 cycles/min when vibrating in a vacuum. The…

Q: Two mass placed on top of each other have a mass of 20 g each and there is a coefficient of static…

A: At the position of amplitude the restoring spring force will be F=kAand therefore the acceleration…

Q: In a damped single-degree-of-freedom system with a mass of m = 10 kg, stiffness coefficient k = 4000…

Q: 2) Find the critical damping constant c of the system shown in the figure. Choose a suitable damping…

Q: Electric motor, dashpot, and spring system. The total mass of the system is 21.5 kg. The motor runs…

A: given:-total mass(m)=21.5 kgspeed(N)=500 rpmstifness (k)=6400 Nmdashpot offer 500N at 4.0 m/sec…

Q: The free-vibration response of a spring-mass system is observed to have a frequency of 2 rad/s, an…

A: The damping ratio is less than unity; it is a case of under damping or viscous damping. The…

Q: QUESTION 2 A vibrating system can be modeled with a mass weighs 20 kg and supported on springs and…

A: The objective of the question is to determine the displacement of a vibrating system after 1 second…

Q: A spring with an m-kg mass and a damping constant 3 (kg/s) can be held stretched 2.5 meters beyond…

A: The damping constant is The stretched in spring by a force is .

Q: An electric motor is mounted on a steel table. The deflection of the table under the weight motor is…

A: Now write the available data as follows.

Q: Find the damping coefficient c for this system.

A: Given: m= 24 kg k= 3000 N/m no of cycles (N)=5 xNx0=110x: Amplitude To find: Damping coefficient c…

Q: A spring with a mass of 1 kg has a spring constant 43 kg/s2. If the spring begins at equilibrium…

A: The mass is The spring constant is The velocity at equilibrium position is

Q: Consider the following system (m = 27 kg and k=3kN/m). %3D k Suppose that the damping coefficient is…

Q: An underdamped shock absorber is to be designed for a motor cycle of mass 200 kg(m). When the shock…

A: Given Data: The mass of motor cycle m=200 kg Damped period of vibration t=2 s Formula used : k= mω2…

Q: In an effort to miniaturize a mass-spring system, the mass was reduced by eight times, and the…

A: Calculated free oscillations periods of system.

Q: A mass of 5 kg is suspended on a spring and set oscillating. It is observed that the amplitude…

A: Given m= 5 kg X3=5% X1 t=0.5 sec for two oscillation

Q: The equation of motion of a 1 – D.o.F. spring – mass – damper system is given as follows; 7,5 * +…

A: Given: damping coefficient C=350N.s/m Equations of motion=7.5x..+0.65cx+22000x=0. Solution:…

Question

a damper, the frequency of oscillation is found to
the stiffness of the spring is 1 kN/m. By introducing
coefficient of the damper?
be 90% of the original value. What is the damping
In a spring-mass system, the mass is 0.1 kg and
the stiffness of the spring is 1 kN/m. By introducing
be 90% of the original value. What is the damping
(a) 1.2 Ns/m
(b) 3.4 Ns/m
(c) 8.7 Ns/m
(d) 12.0 Ns/m

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

You are to investigate the vibration properties of the shock absorber system of a 2000 kg car. The shock absorbers drop 10 cm when the car is lowered from the lift and stands on its wheels. In addition, the amplitude decreases by 50% with each oscillation. Assume that the weight of the car is distributed evenly over all wheels and use the above information to determine the values for the spring constant k and the damping coefficient b. What error does the calculation deliver if the natural frequency of the shock absorbers ω is approximated by that of the undamped system ω_0?
Mohammed Mahad Tabook A lathe can be modeled as an electric motor mounted on a steel table. The table plus rotor have a mass of 100 kg. The rotating parts of the lathe have a mass of 10 kg at a distance 0.1 m from the center. The damping ratio of the system is measured to be zeta= 0.06 (viscous damping) and its natural frequency is 7.5 Hz and the driving frequency is 30HZ The natural frequency in rad/s is Choose.. The driving frequency in rad/s is Choose... The frequency ratio is Choose... The amplitude of the steady-state displacement of the motor (in mm) Choose... the phase shift of the steady state displacement (in rad) is Choose... +
The landing gear of an airplane of mass, m = 2000 kg is idealized as a SDOF spring-mass-dampersystem. The runway surface is described as y(t) = (0.2cos50 t )m. Determine the values ofspring constant k, and the damping coefficient c that limit the amplitude of the vibration of theairplane to 0.1 m. Note that for this problem the limiting value for the natural frequency should be50 rad sec.
Question 2: a. Determine the differential equation of motion and find the natural frequency (w). Also establish the critical damping for the system shown in Fig. 2a b. If the system has a mass of 0.907 kg with spring stiffness of 7.0 N/cm. Determine the critical damping coefficient.
PARTS A & B solve carefully and label each part and CIRCLE FINAL ANSWER ( Use image Below) Part A - Assuming the elements are all linear, determine a model for the mass-spring-damper system. Make sure to clearly define the direction of positive velocity. Simplify your answer such that the model is in terms of the parameters (?, ?, ??, ??), the input force (?), the spring deflection and the mass velocity as well as their time derivatives. Part B - Take the ANSWER from PART A and replace the damping constant ? with the nonlinear expression ? = ?? + ?? + ? , with ? as the velocity of the mass.
A vehicle weighing 5,000 lb is supported on four identical springs and four identical viscous dampers. The static deflection of the vehicle under its own weight is 10 in. Determine the damping required for each of the dampers so that the critical damping is achieved.
The measurements on a mechanical vibrating system show that it has a mass of 8 kg and that the springs can be combined to give an equivalent spring of stiffness 5.4 N/mm. If the vibrating system have a dashpot attached which exerts a force of 40 N when the mass has a velocity of 1 m/s, find : 1. critical damping coefficient, 2. damping factor, 3. logarithmic decrement, and 4. ratio of two consecutive amplitudes.
A mass of 10kg oscillates at the end of a spring of stiffness, 5N/m. If the damping in the system is such that it gives a damping ratio of 0.45, determine. i) The critical damping. ii) The value of the damping coefficient. iii) The damped natural frequency. iv) The equation for the displacement if the initial velocity is 0.025m/s, and the initial displacement is 0 m.
a lot of people say this is the answer but some say it is not , please check for me
The mass of the system shown below is 10Kg. The mass is initially at rest when at time t=0, it is given an initial disturbance as shown. The viscous damping coefficient is 100NS/m and the spring stiffness, K is 100N/m. Which equation describes the movement of the mass. Disturbance Mass Spring Damper Select one: x(t) = (A, + A½t) e¯wnt a. %3D x(t) = A, e(-3+v?-1)wnt + A,e(-3-v?-1 )wnt x = (A3cos wat+ A4sin wat)e-wnt %3D C. Finish attempt.. evious page
A pump of mass 30 kg is supported on a support structure which has 4 springsarranged in parallel with stiffness values of 10 kN/m, 15 kN/m, 8 kN/m and12 kN/m respectively. Viscous damping is present within the system and 1 kNs/mis applied by a damper.i) Produce a neat sketch of the system and state its equation of motion.ii) Determine the damping ratio for the system, commenting on its value. iii) Determine the damped frequency of vibration.iv) Determine the logarithmic decrement for the vibrating system.
Given an oscillator of mass 2.0kg and spring constant of 180N/m, what is the period without damping? Use numerical methods to model this oscillator with an additional friction force equal to where c is a positive damping constant. Using c=5.0, what is the new period of oscillation. What about for c=10? Assume initial position is 0.2m and initial velocity is zero. Please find the period using the position versus time plot and use the first full cycle of the motion.