b) By considering the development of a wind farm consisting of 10-m diameter wind turbines with efficiencies of 45%, evaluate the average output power in kW per km² if the wind blows at the average velocity of 7 m/s by considering that the air density, p is equal to 0.602 kg/m³.

b) By considering the development of a wind farm consisting of 10-m diameter wind turbines with efficiencies of 45%, evaluate the average output power in kW per km² if the wind blows at the average velocity of 7 m/s by considering that the air density, p is equal to 0.602 kg/m³.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1. A pump is used to lift 11 CMH of water at 20°C from a nearby fresh water lake whose free surface is 2.5 meters below the pump centerline to an elevated water dam whose free surface is 10 meters above the pump centerline. The suction pipe and discharge pipe are DN 8 SCH 40 and DN 10 SCH 40, respectively. The suction pipe has a total length of 5.4 m, while the discharge pipe has a total length of 21 m. Assume Hazen-Williams coefficient of 140 for both suction and discharge pipes and ignore minor head losses. a. Draw a schematic of the problem. Clearly indicate the elevations with respect to the pump centerline. b. Calculate the total dynamic head of the pump in meters. c. Calculate the water power output of the pump in kW. d. Calculate the brake power input to the pump in kW, assuming a pump mechanical efficiency of 75%. e. Calculate the electrical power input to the pump in kW, assuming a motor efficiency of 90%.
*** ***Solve the following problems, correctly and systematically, and show all the necessary figures. Show your correct and complete solution neatly. There are required 2000 kW of compressor power to handle air adiabatically from 1 atmosphere, 27 °C, to 305 kPaa. The initial air velocity is 20 m/s and the final velocity is 85 m/s. a) If the compression is isentropic, find the compressor capacity, in m3/s. b) If the compression process is irreversible adiabatic to a temperature of 160 °C, with the capacity found in (a), determine the compressor power input, in Hp.
A 3-bladed wind turbine with 250 kW generator has diameter of 50 m and tower height of 60 m. It is designed to have Cp of 0.25 at wind speed of 12 m/s when regulation starts. The cut-in and furling Speeds for the machine are 5 m/s and 20 m/s respectively. Mechanical and electrical efficiencies are 90 % and 95 %. By assuming the density of air as 1.225 kg/m3. Calculatea. What is power developed by the rotor at 12 m/s when regulation starts? b. If the tip-speed ratio at this wind speed is 4.2, then what is the rpm of the rotor? c. Calculate the actual torque developed. d. Calculate the maximum possible annual power output.
Thermodynamics: Please show me how to solve the following practice problems in step by step solution (Thank you so much!)
You only know one point on a pump curve, where a water pump produces 20 m of hydraulic head at flow rate of 3.67 L/s, and you want to use this to pump water from a lower tank to an upper tank located 15 m higher. Both tanks are open to the atmosphere. Briefly explain your reasoning, in 1‐2 sentences, for each of the following. a) Should this pump be placed next to the lower tank or the higher one? b) Given the data point you have from the pump curve, will the flow rate be higher or lower than 3.67 L/s if the water is pumped exactly 15 m uphill?
A car of mass 30 kg is moving on a road. The acceleration of car is 10 m/s^2 and the coefficient of friction between road and car is 0.34. Estimate the force required to stop the car.
A slingshot, which can be modeled as a spring with spring constant k = 81.9 N/m, is stretched by 22 cm with respect to its equilibrium position and used to shoot a rock with mass 0.09 kg straight up into the air. Find the speed of the rock (in m/s) when it reaches a height which is 25% of its maximum height (relative to the position at which it was shot from). Use g = 9.81 m/s?. Hint: First find the maximum height, and then find the speed when the height is 25% of that.
Q. The velocity of steam leaving a nozzle of Turbine is 896 m/s and the nozzle angle is 20°. The blade velocity is 300 m/s and the blade coefficient is 0.79. Assuming the mass flow rate as 1 kg/s and the runner blades are symmetric. Determine the power developed in kW
17.Give examples for kinetic energy, potential energy, electrical energy, chemical and energy mechanical energy exists during daily life. 050E106 250E106
Question No. 14 A body of mass 25 g has a momentum of 0.4 kg-m/s. Find its kinetic energy. O4.8 J 6.4 J O1.6J O3.2J SAVE AND NE YT
b) A wind turbine is a device used to convert the kinetic energy of flowing air into mechanical energy, then to electrical energy with the aid of a generator. Consider a single operational turbine that received an average wind velocity of 80 km/h on a single day. The mass of wind flowing through the turbine blades is estimated to be 50 kg/s with an output power measured at 8 kW. Determine the efficiency of the generator within the turbine.
A duct of constant diameter with fan and some resistance heaters are the basic scheme of the hair dryer. At inlet, air has density of 2 kg/m^3 and at outlet, due to heating effect it drops to 0.25 kg/m^3. Determine the change in velocity in percentage if inlet velocity is 1 m/sec? 400% increase 300% decrease 300% increase 400% decrease no change