ASK YOUR TEACHER PRACTICE ANOTHER A 1.67 kg piece of iron is heated to 100°C and then placed in 1.67 kg of water that has been cooled to 0°C. When the iron is placed in the water, the iron will get cooler and the water w get warmer until they reach the same temperature. Which of the following statements best describes that final temperature? O The final temperature will be between 0°C and 50°C, because the specific heat capacity of water is more than that of iron. O The final temperature will be closer to 100°C than it is to 50°C, because the iron starts at a very hot temperature and this will increase the temperature of the water by a large amount. O The final temperature will be about 50°C, because the mass of iron and the mass of water are the same, so the materials will come to a final temperature that is exactly halfway between their starting temperatures. Need Help? Read It

ASK YOUR TEACHER PRACTICE ANOTHER A 1.67 kg piece of iron is heated to 100°C and then placed in 1.67 kg of water that has been cooled to 0°C. When the iron is placed in the water, the iron will get cooler and the water w get warmer until they reach the same temperature. Which of the following statements best describes that final temperature? O The final temperature will be between 0°C and 50°C, because the specific heat capacity of water is more than that of iron. O The final temperature will be closer to 100°C than it is to 50°C, because the iron starts at a very hot temperature and this will increase the temperature of the water by a large amount. O The final temperature will be about 50°C, because the mass of iron and the mass of water are the same, so the materials will come to a final temperature that is exactly halfway between their starting temperatures. Need Help? Read It

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter20: The First Law Of Thermodynamics

Section: Chapter Questions

Problem 20.3OQ: Assume you are measuring the specific heat of a sample of originally hot metal by using a...

See similar textbooks

Similar questions

In 1986, a gargantuan iceberg broke away from the Ross Ice Shelf in Antarctica. It was approximately a rectangle 160 km long, 40.0 km wide, and 250 m thick. (a) What is the mass of this iceberg, given that the density of ice is 917kg/m3 ? (b) How much heat transfer (in joules) is needed to melt it? (c) How many years would it take sunlight alone to melt ice this thick, if the ice absorbs an average of 100W/m2, 12.00 h per day?
To help prevent from damage, 4.00 kg at 0C water is sprayed onto a fruit tree. (a) How much heat transfer occurs as the water freezes? (b) How much would the temperature at the 200kg tree decrease if this amount of heat transferred from the tree? Take the specific heat to be 3.35kJ/kgC, and assume that no phase change occurs.
Unreasonable Results (a) An automobile mechanic claims that an aluminum rod fits loosely into its hole on an aluminum engine block because the engine is hot and the rod is cold. If 1he hole is 10.0% bigger in diameter than the 22.0C rod, at what temperature will the rod be the same size as the hole? (b) What is unreasonable about this temperature? (2) Which premise is responsible?
. A 1,200-kg car going 25 m/s is brought to a stop using its brakes. Let's assume that a total of approximately 20 kg of iron in the brakes and wheels absorbs the heat produced by the friction. (a) What was the car's original kinetic energy? (b) After the ear has stopped, what is the change in temperature of the brakes and wheels?
Assume you are measuring the specific heat of a sample of originally hot metal by using a calorimeter containing water. Because your calorimeter is not perfectly insulating, energy can transfer by heat between the contents of the calorimeter and the room. To obtain the most accurate result for the specific heat of the metal, you should use water with which initial temperature? (a) slightly lower than room temperature (b) the same as room temperature (c) slightly higher than room temperature (d) whatever you like because the initial temperature makes no difference
A high-end gas stove usually has at least one burner rated at 14 000 Btu/h. (a) If you place a 0.25-kg aluminum pot containing 2.0 liters of water at 20.C on this burner, how long will it take to bring the water to a boil, assuming all the heat from the burner goes into the pot? (b) Once boiling begins how much time is required to boil all the water out of the pot?
(a) How much heat transfer is necessary to raise the temperature of a 0.200kg piece of ice from 20.0C to 130C, including the energy needed for phase changes? (b) How much time is required for each stage, assuming a constant 20.0kJ/s rate of heat transfer? (c) Make a graph of temperature versus time for this process.
Integrated Concepts One 30.0C day the relative humidity is 75.0%, and that evening the temperature drops to 20.0C, well below the dew point. (a) How many grams of water condense from each cubic meter of air? (b) How much heat transfer occurs by this condensation? (c) What temperature increase could this cause in dry air?
A person inhales and exhales 2.00 L of 37.0C air, evaporating 4.00102g of water from the lungs and breathing passages with each breath. (a) How much heat transfer occurs due to evaporation in each breath? (b) What is the rate of heat transfer in watts if the person is breathing at a moderate rate of 18.0 breaths per minute? (c) If the inhaled air had a temperature of 20.0C, what is the rate of heat transfer for warming the air? (d) Discuss the total rate of heat transfer as it relates to typical metabolic rates. Will this breathing be a major form of heat transfer for this person?
A 3.00-g lead bullet at 30.0C is fired at a speed of 2.40 102 m/s into a large, fixed block of ice at 0C, in which it becomes embedded. (a) Describe the energy transformations that occur as the bullet is cooled. What is the final temperature of the bullet? (b) What quantity of ice melts?
I Review I Constants Imusi pe Uroppeu inNO the water so that the final temperature of the system will be 22.0 ° C ? An insulated beaker with negligible mass contains liquid water with a mass of 0.280 kg and a temperature of 77.8 °C . Take the specific heat of liquid water to be 4190 J/kg · K, the specific heat of ice to be 2100 J/kg · K , and the heat of fusion for water to be 3.34×105 J/kg. > View Available Hint(s) DA ΑΣφ mice
If the mass of the aluminum block is 2.7 kg, what was its initial temperature. Enter the numerical value in units of ° C?