As part of a class project, you are given 0.900 g of nichrome and asked to fabricate a wire with uniform cross-section. You use up 95% of the nichrome and make a wire with a resistance of 0.763 Ω.The resistivity of nichrome is \(1.00 \times 10^{-6} \, \Omega \cdot \text{m}\) and its density is \(8.31 \times 10^3 \, \text{kg/m}^3\).(a) What length of wire do you end up with?\[ \text{_______ m} \](b) What is the diameter of the wire?\[ \text{_______ mm} \]

Answered: Image /qna-images/answer/64d074c0-4d11-4825-a208-e7571c33f9aa.jpg

Answered: As part of a class project you are…

Similar questions

An aluminum wire with a diameter of 0.125 mm has a uniform electric field of 0.195 V/m imposed along its entire length. The temperature of the wire is 35.0°C. Assume one free electron per atom. (a) Use the information in this Table of Resistivities and Temperature Coefficients to determine the resistivity (in Ω · m) of aluminum at this temperature. (b) What is the current density (in MA/m2) in the wire? J =----- MA/m2 (c) What is the total current (in mA) in the wire? I =--------- mA (d) What is the drift speed of the conduction electrons? vd = ------µm/s (e) What potential difference must exist between the ends of a 1.70 m length of the wire to produce the stated electric field? ΔV = --------- V
Problem 3: A 1.2 g wire has a density of 2.7 g/cm3 and a resistivity of 2.7 × 10−8 Ωm. The wire has a resistance of 15 Ω. a) How long is the wire? b) The wire is made up of atoms with valence 1 and molar mass 26.98 g/mol. What is the drift speed of the electrons when there is a voltage drop of 30 V across the wire?
are made of the same metal. 7) wires 1 and 2 wire 2 has twice the length and twice the diameter of wire 1. What are the ratios (a) Q₂/Q² of the resistivities and (b) R.2/121 of the resistance of the two wires? A) P₁/P₁ = 1, 1₂/1²₁=0.5 13) P₂/p₁ = 1, 82₂/124₁ =0.25 C) P₁/P₁ = 0.5² h₂/1²₁=0.5 D) P₁/P₁ = 0.25, 1₂₁/1²₁=0.5 2 र
A current I =0.35 A flows through a cylindrical resistor made out of some unknown ceramic-like composite. The radius of the cylindrical body is 4.25 mm while the length is 1.65 cm. If the potential drop over the resistor is 7.54 V, what is the resistivity of the unknown ceramic material? (Answer in Ohm*m)
A potential difference of 3.00 µV is set up across a 2.00 cm length of a wire (with resistivity of 10-8 2'm) that has the cross-section area of 106 m². How much charge drifts through a cross section of the wire in 4.0 ms? Give your answer in µC.
A copper wire of radius a = 0.240 mm has an aluminum jacket of outer radius b = 0.329 mm. There is a current i = 1.57 A in the composite wire. Take the resistivity for copper and aluminum to be 1.69 × 10-8Ω·m and 2.75 × 10-8Ω·m. Calculate the current in (a) the copper and (b) the aluminum. (c) If a potential difference V = 13.1 V between the ends maintains the current, what is the length in meters of the composite wire?
The graph below shows data for a wire that is 9 m long & has a cross-sectional area of 0.002 m². The wire is made from an unknown material. Determine the resistivity of the material and the power loss of the wire when the current is 100 A. VOLTAGE vs. CURRENT GRAPH V (V) 500 400 300 200 100 20 40 60 80 1 (A) 100 resistivity of wire = power loss (when I = 100 A) = ABACHER 2-m
As part of a class project you are given 0.900 g of copper and asked to fabricate a wire with uniform cross-section. You use up 95% of the copper and make a wire with a resistance of 0.723 Ω. The resistivity of copper is 1.72 10-8 Ω · m and its density is 8.92 103 kg/m3. (a) What length of wire do you end up with? (m)(b) What is the diameter of the wire? (mm)
An aluminum rod with a square cross section is 1.8 m long and 6.2 mm on edge. (a) What is the resistance between its ends? (b) What must be the diameter of a cylindrical copper rod of length 1.8 m if its resistance is to be the same as that of the aluminum rod? The resistivity of aluminum is 2.75 x 108 Q-m and the resistivity of copper is 1.69 x 108 Q:m. (a) Number i Units (b) Number i Units
A heating element is made by maintaining a potential difference of 75.0 V across the length of a Nichrome wire has a 2.60 x 10-6 m² cross section. Nichrome has a resistiv of 5.00 x 10-7 m. If the element dissipates 5000 W, wha its length? Give your answer in cm.