QUESTION 2Airflow of 4.5 ms at 1 atm, 10°C, and B0% relative humidty is conditioned to 25C and 50% relative humidity through heating and then injoction of saturatod watervapor100'C.What is the flow rate of water vapor added to air? (in kois)(Choloes: 0.0001, 0.0182. 0.0222. 0.0318, 0.0424)What is the heating power of eloctricty? (n ku)(Choices: 58.8, 70.1, 877, 116.9, 168.1)What is the relative humidity after the heating section? (n %)(Choices: 18.5, 32.2, 27.0, 20.1, 38.5)

Air flow rate Q=4.5m3/s ρ1=1atm=1.01325 barT1=10°Cθ1=80%T2=25°Cθ3=50%

Arflow of 4.5 ms at 1 atm, 10C, and 80% relative humidty is conditioned to 25°C and 50% relative humdty thvough heating and then injection of saturated water vapor@100'C. What is the flow rate of water vapor added to air? in kgis) (Cholces: 0.001, 0.0182. 0.022. 0.0018, 0.0424) What is the heating power of electricity? (n k) (Choices 58.8, 79.1,87.7, 116.9, 168.1) What is the relative humidity after the heating section? (in ) (Choices: 18.5, 322, 27.0, 20.1, 38.5)

Arflow of 4.5 ms at 1 atm, 10C, and 80% relative humidty is conditioned to 25°C and 50% relative humdty thvough heating and then injection of saturated water vapor@100'C. What is the flow rate of water vapor added to air? in kgis) (Cholces: 0.001, 0.0182. 0.022. 0.0018, 0.0424) What is the heating power of electricity? (n k) (Choices 58.8, 79.1,87.7, 116.9, 168.1) What is the relative humidity after the heating section? (in ) (Choices: 18.5, 322, 27.0, 20.1, 38.5)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A moist air sample has dry bulb temperature of 30°C and specific humidity of 11.5 g water vapour per kg dry air Assume molecular weight of air as 28.93 . If the saturation vapour pressure of water at 30°C is 4.24 kPa and the total pressure is 90 kPa, then the relative humidity (in %) of air sample is, (a) 50.5 (b) 38.5 (c) 56.5 (d) 68.5
Using a psychrometric diagram, describe the heating and humidification process and the following data. Initially, the air at dry bulb temperature (DBT) 25 ° C and RH55% The air is heated to DBT 75 C. The heated air is then flowed through a humidifier to increase the RH to 25%. For this process, calculate, a Change in the absolute humidity of the air from initial to final conditions air b. The change in air enthalpy from initial to final conditions = (kg of water / kg (kJ / kg air
A volumetric flow rate of 3750 m'ih of outside air at 39 "C dry bulb and 26 °C wet bulb temperatures is to mixed with 8250 m/h of retum air at 25 °C and 50% relative humidity before entering a cooling coil in an conditioning device. The mixture leaving the coilatQ0% relative humidity is then supplied to the space. 1 sensible heat ratio of the conditioned space is/0.75) Sketch the process on the psychrometric chart and f the followings: a) The dry bulb temperature of the supply air. 17.6 c b) The cooling coil capacity, kW. 63 38 KW c) The apparatus dew point and supply air dew point temperatures. Apper = 4 / Sey des 16 c d) The sensible and latent heat loads of the space. Qsas = 28.22Kw, Qut 9.407 kw e) The bypass factor of the cooling coil. ) The rate at which moisture is removed from air. 15 5
A volumetric flow rate of 3750 m'h of outside air at 39 °C dry bulb and 26 °C wet bulb temperatures is to mixed with 8250 mh of return air at 25 °C and 50% rgative humidity before entering a cooling coil in an conditioning device. The mixture leaving the coil.at0% relative humidity is then supplied to the space sensible heat ratio of the conditioned space is 0.75) Sketch the process on the psychrometric chart and t the followings: a) The dry bulb temperature of the supply air. b) The cooling coil capacity, kW. c) The apparatus dew point and supply air dew.point temperatures. d) The sensible and latent heat loads of the space. e) The bypass factor of the cooling coil. The rate at which moisture is removed from air.
Air from outside enter a car cabin with 3000 cfm at 85°F (db), 65% relative humidity, it required to cool until reached to a condition of saturation at 60°F. Assume the process accrue at sea level with PB = 29.92 in. Hg. by using the psychrometric chart calculate: 1) The heat transfer required for cooling process. 2) The rate of change in air specific humidity to the change in air enthalpy 3) Draw the process in psychrometric chart.
What is the temperature entering the cooling sectionwhen 25 kW of heat are removed and the air exits at 15 deg C, a relative humidity of 30% and a volumetric flowrate of 0.7 m^3/s?
5-b) Atmospheric air at 38°C and 40 per cent relative humidity is to be cooled and dehumidified to a state of saturated air at 10°C. The mass rate of flow of atmospheric air entering the dehumidifier is 45.4 kg/h. Neglecting any pressure drop, determine (i) The mass of water removed; (ii) The quantity of heat removed [Ans. (i) 0.397 kg/h, (ii) 2287 kJ/h]
Air is heated and humidified in air conditioning process. Mist humidifier is used. The mass flow rate of inlet air is 20 kg/s, temperature -5 °C and relative humidity 40 %. After heating, the temperature of air is 30 °C. After mist humidifier, the relative humidity of air is 70 %. Calculate or look up from Mollier chart: 1) Enthalpy of inlet air 2) Absolute humidity of inlet air 3) Enthalpy of heated air 4) Relative humidity of heated air 5) Absolute humidity of heated air 6) Heating power kJ/kg (with one decimal accuracy) g/kgdry air (with one decimal accuracy) kJ/kg (with one decimal accuracy) % (with zero decimal accuracy) g/kgdry air (with one decimal accuracy) KW (with zero decimal accuracy) 7) Absolute humidity after humidifier 8) Mass flow rate of the humidifier mist 9) Temperature after humidifier 10) Enthalpy after humidifier g/kgdry air (with one decimal accuracy) kg/s (with three decimal accuracy) °C (with one decimal accuracy) kJ/kg (with one decimal accuracy)
Calculate the water vapor pressure of the atmosphere if the dry-bulbtemperature is 22°C and the wet bulb temperature is 10°C at standardatmospheric pressure , Calculate also the relative humidity, the degree or percentof saturation , humidity ratio , and the enthalpy of the mixture. solve with complete diagram
1. An air-conditioned space is maintained at 25 °C and 50% relative humidity. The outside conditions are 40 °C DBT and 25 °C WBT. The space has a sensible heat gain of 24.5 kW. The conditioned air is supplied to the space as saturated air at 10 °C. The equipment consists of an air washer such that the air entering to it comprises 25% outside air and the remainder being recirculated room air. Calculate: - A. The volume flow rate supplied to the space. B. The latent heat gain to the space. C. The cooling load of the air washer.
Use the es value from the saturation vapor pressure question and a relative humidity of 0.8 to determine the actual vapor pressure, ea (include units). (The es value is 2kPa)
Use the concept of evaporative cooling to explain how air’s relative humidity is measured using a sling psychrometer