Anemometers are used to measure wind speeds. Wind striking the cups causes the assembly to rotate; a gauge measures the frequency of this rotation and translates the data into wind speed. The length of each arm, as measured from cup to cup, is 46.5 cm. The friction in the bearings is negligible, so the tangential speed of the cups matches the wind speed fairly closely. Bulb Coil Your company makes anemometers and plans to install light bulbs on them for high-wind warnings. The idea is to attach a coil of wire of radius 13.2 cm to one of the arms and use the EMF induced by the magnetic field of the Earth to light the bulb. The bulbs possess 234 2 of internal resistance but need 12.5 W of rms power dissipation to be visible at night. (The resistance of the wire is negligible.) Although company management wants this new feature, you have doubts about its practicality. Assuming the magnetic field of the Earth is 0.500 G and is oriented roughly horizontal with the Earth's surface, and that 91.5 mph is considered the threshold of dangerous wind speed, calculate the number of turns in the coil wire needed to light the bulb. Would this high-wind warning feature be useful? number of turns: 15953 Incorrect No, the coil would be too large to fit on the anemometer. Yes, this device is practical from a design standpoint.

Anemometers are used to measure wind speeds. Wind striking the cups causes the assembly to rotate; a gauge measures the frequency of this rotation and translates the data into wind speed. The length of each arm, as measured from cup to cup, is 46.5 cm. The friction in the bearings is negligible, so the tangential speed of the cups matches the wind speed fairly closely. Bulb Coil Your company makes anemometers and plans to install light bulbs on them for high-wind warnings. The idea is to attach a coil of wire of radius 13.2 cm to one of the arms and use the EMF induced by the magnetic field of the Earth to light the bulb. The bulbs possess 234 2 of internal resistance but need 12.5 W of rms power dissipation to be visible at night. (The resistance of the wire is negligible.) Although company management wants this new feature, you have doubts about its practicality. Assuming the magnetic field of the Earth is 0.500 G and is oriented roughly horizontal with the Earth's surface, and that 91.5 mph is considered the threshold of dangerous wind speed, calculate the number of turns in the coil wire needed to light the bulb. Would this high-wind warning feature be useful? number of turns: 15953 Incorrect No, the coil would be too large to fit on the anemometer. Yes, this device is practical from a design standpoint.

Similar questions

An old vinyl record is a thin plastic disk of radius 0.25 m and mass 126 g. It is freely rotating at 45 rev/min. You are able to stop the record from rotating in 6 s by pressing your finer against the rim and exerting a radially directed force of 9 N. (Recommendation: If you don't know what a vinyl record is, please do a Google search for an image to help your understanding.) What is the coefficient of kinetic frictions between the record and your finger??
The hard disk drive in a computer spins at a rate of 7.20 x 10^3 rpm. If the disk has a radius of 8.26 cm, what is the tangential speed of the outer edge of the disk?
A small 700 g ball on the end of a thin, light rod is rotated in a horizontal circle of radius 2.5 m. Calculate the torque needed to keep the ball rotating at a constant angular speed if the air resistance experienced by the ball is 0.0200 N. Ignore the rods moment of inertia and air resistance. Hint: Treat the small ball as a particle.
The diameters of the main rotor and tail rotor of a single-engine helicopter are 7.57 m and 1.03 m, respectively. The respective rotational speeds are 451 rev/min and 4,150 rev/min. Calculate the speeds of the tips of both rotors. main rotor = m/s tail rotor = m/s Compare these speeds with the speed of sound, 343 m/s. vmain rotor = vsound vtail rotor = vsound
The diameters of the main rotor and tail rotor of a single-engine helicopter are 7.53 m and 1.04 m, respectively. The respective rotational speeds are 456 rev/min and 4,140 rev/min. Calculate the speeds of the tips of both rotors MAIN ROTOR M/S? TAIL ROTOR M/S Compare these speeds with the speed of sound, 343 m/sv main rotor = ? V SOUND tail rotor = V SOUND
A string trimmer is a tool for cutting grass and weeds; it utilizes a length of nylon "string" that rotates about an axis perpendicular to one end of the string. The string rotates at an angular speed of 37 rev/s, and its tip has a tangential speed of 56 m/s. What is the length of the rotating string
To prepare a weaving loom, you wind a length 2.8 m of yarn onto a reel of radius 3.0 cm. This takes a time of 9.3 s. What is the angular speed of the reel.
An optical disk drive in your computer can spin a disk up to 10,000 rpm (about 1045 rad/s). If a particular disk is spun at 968.7 rad/s while it is being read, and then is allowed to come to rest over 0.301 seconds, what is the magnitude of the average angular acceleration of the disk? rad average angular acceleration: s2 If the disk is 0.12 m in diameter, what is the magnitude of the tangential acceleration of a point 1/7 of the way out from the center of the disk? m tangential acceleration: s2 about us privacy policy terms of use contact us help careers tv W MacBook Air F12 F10 F9 80 000 000 F4 F3
A bicycle has a front sprocket of diameter 5.0 cm and a back sprocket of 2.0 cm. The bicyclist pedals at 2 revolutions per second turning the front sprocket, and the chain, which connects the front and back sprockets, turns the back sprocket. The wheel and the back sprocket turn together. The back wheel has a radius of 30 cm. How fast will the bike travel down a straight level path? 3.4 m/s 6.5 m/s 9.4 m/s 1.8 m/s
Mary and her younger brother Alex decide to ride the carousel at the State Fair. Mary sits on one of the horses in the outer section at a distance of 2.0 m from the center. Alex decides to play it safe and chooses to sit in the inner section at a distance of 1.3 m from the center. The carousel takes 5.6 s to make each complete revolution. (a) What is Mary's angular speed ?M and tangential speed vM? (b) What is Alex's angular speed ?A and tangential speed vA?