An 8-pole d.c. shunt generator with 778 wave - connected armature conductors and running at 500 r.p.m. supplies a load of 12.5 ohm resistance at terminal voltage of 250V. The armature resistance is 0.24 ohm and the field resistance is 250 ohm. Find the armature current, the induced e.m.f. and the flux per pole.

An 8-pole d.c. shunt generator with 778 wave - connected armature conductors and running at 500 r.p.m. supplies a load of 12.5 ohm resistance at terminal voltage of 250V. The armature resistance is 0.24 ohm and the field resistance is 250 ohm. Find the armature current, the induced e.m.f. and the flux per pole.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

S. 13
Flux is exactly proportional to L2 times field current in a d.c generator. The generator operates at a speed of 200 revolutions per minute and has a flux of 62 mWb.f per pole. The generator is lap wound with 1500 conductors in series; determine the e.m.f. produced. If the winding is wave wound, calculate the change in excitation current required to get the same voltage as previously stated. The machine has six poles.
An engineer is designing 4-pole DC generator with 30 conductors by using simplex two-layer wave- winding method. Sketch the armature winding by showing the proper calculations.
Example : In a 110 V, d.c. compound generator, the resistance of the armature, shunt field and series field are 0.06 , 25 and 0.04 respectively. The load consists of 200 lamps each rated at 55 W, 110 V. Find the total e.m.f. generated and the armature current when the machine is connected in (a) long shun
A 4 pole generator with wave wound armature has 54 slots each having 28 conductors. The flux per pole is 0.01 Wb. () At what speed must the armature rotate to give an induced EMF of 220V is, (i) What will be the voltage developed, if the winding is lap connected and the armature rotates at the same speed is,
I need the answer as soon as possible
3. A 4-pole armature of a d.c. machine has 1000 conductors and a flux per pole of 20 mWb. Determine the e.m.f. generated when running at 600 rev/min, when the armature is (a) wave-
the armature of a 12 pole wave wound dc shunt generator has 50 slots with 12 conductors per slot. the generatoris running at a speed of 625 rpm and supplies a resistive load of 15 ohm at a terminal voltage 350v. the armature and the field reisitance are0.5 ohm and 70 ohm respectively. find the armature current,generated emf and flux per pole
Develop a simple Lap Windings for DC MACHINE. Provide a winding table Given: 4 Pole, Pole Pitch=9, progressive Windings
For a 4-pole dc armature with 28 slots and 8 coil-sides per slot, find the winding pitches and the commutator pitch for a wave winding. What is the distance between brushes in terms of commutator segments?