ال جان ورق Q: A paint baking oven consists of a long, triangular duct in which a heated surface is maintained at 1200 K and another surface is insulated. Painted panels, which are maintained at 500 K, occupy the third surface. The triangle is of width W-1 m on a side, and the heated and insulated surfaces have an emissivity of 0.8. The emissivity of the panels is 0.4. During steady-state operation, at what rate must energy be supplied to the heated side per unit length of the duct to maintain its temperature at 1200 K? What is the temperature of the insulated surface? Equilateral triangle x=08 TR 7₁ - 1200 K 40.8 Waim-A T₂ = 500 K 6=0.4

ال جان ورق Q: A paint baking oven consists of a long, triangular duct in which a heated surface is maintained at 1200 K and another surface is insulated. Painted panels, which are maintained at 500 K, occupy the third surface. The triangle is of width W-1 m on a side, and the heated and insulated surfaces have an emissivity of 0.8. The emissivity of the panels is 0.4. During steady-state operation, at what rate must energy be supplied to the heated side per unit length of the duct to maintain its temperature at 1200 K? What is the temperature of the insulated surface? Equilateral triangle x=08 TR 7₁ - 1200 K 40.8 Waim-A T₂ = 500 K 6=0.4

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Fast Please..
7. An opaque horizontal flat plate has a top surface area of 2 m2, and its edges and lower surface are well insulated. The plate is uniformly irradiated at its top surface at a rate of 1200 W. Consider steady state conditions for which 1000 W of the incident radiation are absorbed. The plate surface temperature is 350 K and heat transfer by convection from the surface is 400 W such that the net radiation is zero. Determine: (10points) (a) The reflected incident radiation, in W/m². (b) The emissive power, in W/m². (c) Is the surface of the plate diffuse-gray? Prove your answer. (+5 BONUS points¹) Insulation Ts = 350 K
Radiation heat transfer Example: Q1: A large slab of steel 0.1 m thick has in it a 0.1 m-diam hole, with axis normal to the surface. Considering the sides of the hole to be black, specify the rate of radiative heat loss from the hole in W. The plate is at 811 K, the surroundings are at 300 K. A₁ T₁ = 811 k -D=0.1 m- A₂ A3 Hole T S=0.1 m
- A furnace can be considered like a long semicylindrical duct of diameter D = 5 m. The base (1) and the dome (2) of the furnace have emissivity's of 0.5 and 0.9 and are maintained at uniform temperatures of 305 and 1000 K, respectively. a- Draw the network of the system. b- Calculate total resistance. b- Determine the net rate of radiation heat transfer per unit length from the dome to the base surface.
A furnace is located next to a dense array of cryogenic fluid piping. The ice-covered piping approximates a plane surface with an average temperature of Tp = 0°C and a total, hemispherical emissivity of εp = 0.56. That is, the piping can be replaced by a flat surface with the given properties. The furnace wall has a temperature of Tf = 247°C and a total, hemispherical emissivity of εf = 0.86. To minimize the heat loading on the regirgeration equipment and piping, a reflective aluminum radiation shield with a total, hemispherical emissivity of εs = 0.13 on each of its sides is installed between the pipiing and the furnace wall as shown. Assume that all surfaces are diffuse and gray and treat the problem as one-dimensional (surfaces form infinite parallel plates). What is the heat load on on the refrigeration unit? That is, what is the net radiative power at the surface which approximates the dense array of ice-cold piping, qrad,p in Watts?
A furnace is located next to a dense array of cryogenic fluid piping. The ice-covered piping approximates a plane surface with an average temperature of Tp = 0°C and a total, hemispherical emissivity of εp = 0.53. That is, the piping can be replaced by a flat surface with the given properties. The furnace wall has a temperature of Tf = 206°C and a total, hemispherical emissivity of εf = 0.83. To minimize the heat loading on the regirgeration equipment and piping, a reflective aluminum radiation shield with a total, hemispherical emissivity of εs = 0.14 on each of its sides is installed between the pipiing and the furnace wall as shown. Assume that all surfaces are diffuse and gray and treat the problem as one-dimensional (surfaces form infinite parallel plates). What is the heat load on on the refrigeration unit? That is, what is the net radiative power at the surface which approximates the dense array of ice-cold piping, qrad,p in Watts?
Consider a silicon wafer positioned in a furnace that is zone-heated on the top section and cooled on the lower section. The wafer is placed such that the top and bottom surfaces of the wafer exchange radiation with the hot and cold zones respectively of the furnace. The zone temperatures are Tsur,h = 1050 K and Tsur.e = 330 K. The emissivity and thickness of the wafer are e = 0.65 and d = 0.78 mm, respectively. With the ambient gas at T. = 700 K, convection heat transfer coefficients at the upper and lower surfaces of the wafer are 8 and 4 W/m²-K. Find the steady-state temperature of the wafer, in K. Tw i K
Determine the heat loss by radiation from an oven wall to the wall of a room to which the oven wall is directly facing. Assume that no heat flows through the adjacent walls, which are coated with a reradiating material. The oven wall is square, 4 ft on one side, and is 2 ft from the room wall and parallel to it. The oven wall is steel sheet and is at 400°F, and the wall is at 80°F and is of asbestos board.
A concentric cylinder with outer and inner radii of 8 cm and 6 cm, respectively, has length of 1 mwith emissivities of the inner and outer radii at 0.4 and 0.6, respectively. Determine the heattransfer from the outer cylinder to the inner cylinder if the inner and outer temperatures are400K and 600K, respectively.
A long electrical conductor of 10 mm diameter is concentric with a refrigerated cylindrical tube of 50 mm diameter whose surface has an emissivity of 0.9 and temperature of 27 °C. The electrical conductor has a surface emissivity of 0.6 and dissipates 6.0 W per meter length. Assuming that the space between the two surfaces is empty, calculate the surface temperature of the conductor.
. Calculate the heat transfer rate per m² area by radiation between the surfaces of two long cylinders having radii 100 mm and 50 mm respectively. The smaller cylinder being in the larger cylinder. The axes of the cylinders are parallel to each other and separated by a distance of 20 mm. The surfaces of inner and outer cylinders are maintained at 127°C and 27°C respectively. The emissivity of both the surfaces is 0.5.
Question 30 of 30 く - / 4.3 View Policies Current Attempt in Progress Two concentric spheres of diameter D = 0.8 m and D2 = 1.2 m are separated by an air space and have surface temperatures of T = 410 K and T2 = 300 K. (a) If the surfaces are black, what is the net rate of radiation exchange between the spheres, in W? 912 = W (b) What is the net rate of radiation exchange between the surfaces if they are diffuse and gray with &j = 0.5 and ɛ2 = 0.05, in W? 912 = i W (c) What is the net rate of radiation exchange if D2 is increased to 20 m, with ɛ2 = 0.05, ɛ = 0.5, and D = 0.8 m, in W? 912 = W (d) What is the net rate of radiation exchange if the larger sphere behaves as a black body (ɛ2 = 1.0) and with &j = 0.5, D2 = 20 m, and D = 0.8 m, in W? 912 = i W Physical Properties Mathematical Functions II