A W410X132 beam, with a yield stress of 345 MPa, is simply supported over a span of 12.1 m. The beam supports a uniformly distributed dead load of 29.1 kN/m, that includes the self-weight of the beam, and a uniformly distributed live load of 87.5 kN/m. The beam is laterally braced at the supports and at the third points of the span. Calculate the DCR (LRFD) for shear. O 0.78 O 0.87 0.90 O 0.82

A W410X132 beam, with a yield stress of 345 MPa, is simply supported over a span of 12.1 m. The beam supports a uniformly distributed dead load of 29.1 kN/m, that includes the self-weight of the beam, and a uniformly distributed live load of 87.5 kN/m. The beam is laterally braced at the supports and at the third points of the span. Calculate the DCR (LRFD) for shear. O 0.78 O 0.87 0.90 O 0.82

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

solve the unknowns and solve for the length of CA
Determine the maximum flexural stress in the beam loaded as shown below
B. What are the steps involved in concreting?
A reinforced beam of size 300 mm × 450 mm and an effective depth of 400 mm is subjected to a working shear force of 100 kN. The beam is made up of M 25 concrete and Fe 415 steel. Determine the nominal shear stress (N/mm2)
Complete answer
Strength of Materials, i need solutions in 15 minutes please. Q/ The Inverted T section of a L - m simply supported beam has the properties shown in Fig. (4). Find the flange width (b) so that the allowable stresses( σ tension max = 30 Mpa) and (σ compression max. = 90 Mpa.)
The steel beam has the cross section shown. The beam length is L = 7.3 m, and the cross-sectional dimensions are d = 300 mm, bf = 180 mm, tf = 13 mm, and tw = 7 mm. Calculate the largest intensity of distributed load w0 that can be supported by this beam if the allowable bending stress is 250 MPa.
SHOW COMPLETE SOLUTION AND DRAW THE FBD.
The steel beam has the cross section shown. The beam length is L = 30 ft, and the cross-sectional dimensions are d- 15.5 in., b;= 11.9 in, t- 0.680 in, and t- 0.360 in. Calculate the maximum bending stress in the beam if Wo - 7.6 kips/ft. ksi Answer: Omax =
An 8 m simply supported beam supports a uniformly distributed load of w and a 3kN concentrated load located at midspan. The beam's cross section is found to be an inverted triangle with base of 350mm and a height of 400 mm. If the allowable stresses are 90MPa, 30MPa and 2MPa for Fb₁, Fbc, and Fv respectively, solve for the value of w.