A uniform ladder 5.0 m long rests against a frictionless, vertical wall with its lower end 3.0 m from the wall. The ladder weighs 160 N. The coefficient of static friction between the foot of the ladder and the ground is 0.40. A man weighing 740 N climbs slowly up the ladder. (a) What is the maximum friction force, in Newtons, that the ground can exert on the ladder at its lower end? (b) What is the actual friction force, in Newtons, when the man has climbed 1.0 m along the ladder? (c) How far, in meters, along the ladder can the man climb before the ladder starts to slip?

A uniform ladder 5.0 m long rests against a frictionless, vertical wall with its lower end 3.0 m from the wall. The ladder weighs 160 N. The coefficient of static friction between the foot of the ladder and the ground is 0.40. A man weighing 740 N climbs slowly up the ladder. (a) What is the maximum friction force, in Newtons, that the ground can exert on the ladder at its lower end? (b) What is the actual friction force, in Newtons, when the man has climbed 1.0 m along the ladder? (c) How far, in meters, along the ladder can the man climb before the ladder starts to slip?

Similar questions

A uniform board is leaning against a smooth vertical wall. The board is at an angle above the horizontal ground. The coefficient of static friction between the ground and the lower end of the board is 0.890. Find the smallest value for the angle , such that the lower end of the board does not slide along the ground.
A scaffold of mass 67 kg and length 5.0 m is supported in a horizontal position by a vertical cable at each end. A window washer of mass 67 kg stands at a point 1.7 m from one end. What is the tension in (a) the nearer (relative to the person) cable and (b) the farther (relative to the person) cable?
There is this ladder with a length L = 3.5 m and mass M= 15 kg leans against a smooth vertical wall, while its bottom legs rest on a rough horizontal floor. There is also static friction between floor and ladder is u = 0.47. The ladder makes an angle 0 = 55° with respect to the floor. A person of mass 8M stands on the ladder a distance d from its base. What is the magnitude of the normal force N, in newtons, exerted by the floor on the ladder? What is the largest distance up the ladder dmax, in meters, that the person can stand without the ladder slipping?
One end of a uniform 4.40-m-long rod of weight F is supported by a cable at an angle of 0 = 37° with the rod. The other end rests against the wall, where it is held by friction as shown in the figure below. The coefficient of static friction between the wall and the rod is μ = 0.465. Determine the minimum distance x from point A at which an additional object, also with the same weight F, can be hung without causing the rod to slip at point A. A 0 B X You will need to work with the equations F net = 0 and 7 = 0 and manipulate the equations symbolically to solve for the distance. m net
A tightrope walker walks across a 30-m long wire tied between two poles. The center of the wire is displaced vertically downward by 1.0 m when he is halfway across. If the tension in both halves of the wire at this point is 6294 N, what is the mass of the tightrope walker? Neglect the mass of the wire.
You place a 15.0-m long, 22-kg uniform ladder against a smooth vertical wall with the bottom of the ladder 3.0 m from the wall. There is a lot of slippery mud so naturally you are worried about the ladder slipping. The coefficient of static friction between the floor and the ladder is 0.28. What distance, measured along the ladder from the bottom, can a 60-kg person climb before the ladder starts to slip?
Please help me
A straight rigid ladder of length 3.00 m leans against a frictionless vertical wall. The laddermakes an angle of 60.0° with respect to the horizontal floor. What is the minimum value of thecoefficient of static friction between the ladder and the floor that prevents the ladder from slipping?
One end of a uniform 3.70-m-long rod of weight Fg is supported by a cable at an angle of 8 = 37° with the rod. The other end rests against the wall, where it is held by friction as shown in the figure below. The coefficient of static friction between the wall and the rod is μ = 0.535. Determine the minimum distance x from point A at which an additional object, also with the same weight For can be hung without causing the rod to slip at point A. g' 0 B
The drawing shows a uniform horizontal beam attached to a vertical wall by a frictionless hinge and supported from below at an angle 0 = 40° by a brace that is attached to a pin. The beam has a weight of 340 N. Three additional forces keep the beam in equilibrium. The brace applies a force P, and the hinge applies a force with a horizontal component H and a vertical component V. (a) Draw the free- body diagram showing the forces that act on the beam. Find the magnitudes of the forces (b) P, (c) H, and (d) V. Beam Hinge Pin Ꮎ Brace E
A ladder of length 12.0 m with a mass of 40.0 kg leans against a smooth wall. The ladder makes a 35.0o angle with the horizontal. Draw an adequate free body diagram of the ladder and determine the minimum coefficient of static friction between the ladder and the ground necessary to prevent the ladder from slipping.
One end of a uniform € = 3.40-m-long rod of weight w is supported by a cable at an angle of 8 = 37° with the rod. The other end rests against a wall, where it is held by friction (see figure). The coefficient of static friction between the wall and the rod is μ = 0.590. Determine the minimum distance x from point A at which an additional weight w (the same as the weight of the rod) can be hung without causing the rod to slip at point A. B