a) Two thermal generator units have the following incremental cost curves then determine theECONOMIC LOAD SCHEDULING between the generators for total load(PD) of 50 MW,65 MW,85MW,110 MW and 150 MW. When load is zero, the cost of production of the generators are 100and 180 respectively. Assume both generators are operating at all times and power loss isneglected.7wwF1= 0.22 + 0.16 P1 Unit 1: Min 25 MW, Max 90 MW:F2= 0.48 + 0.41 P2 Unit 2: Min 15 MW; Max 75 MWb) b) Calculate Cost of production in each case.

The incremental cost functions are given as F1=0.22+0.16 P1F2=0.48+0.41 P2and Unit 1:…

a) Two thermal generator units have the following incremental cost curves then determine the ECONOMIC LOAD SCHEDULING between the generators for total load(PD) of 50 MW,65 MW,85 MW,110 MW and 150 MW. When load is zero, the cost of production of the generators are 10m and 180 respectively. Assume both generators are operating at all times and power loss is

a) Two thermal generator units have the following incremental cost curves then determine the ECONOMIC LOAD SCHEDULING between the generators for total load(PD) of 50 MW,65 MW,85 MW,110 MW and 150 MW. When load is zero, the cost of production of the generators are 10m and 180 respectively. Assume both generators are operating at all times and power loss is

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

pls solve
Help soon.thanks.
A 10-kVA, 230-V, three-phase, delta-connected, the synchronous generator has a winding resistance of 0.2 ohms/phase and a synchronous reactance of 0.5 ohms/phase. Determine its voltage regulation when the power factor of the load is (a) 86.6% lagging, (b) 86.6% leading, and (c) unity.
A synchronous generator is connected to an infinite bus with excitation voltage Ef = 1.3 pu. The generator has a synchronous reactance of 1.1 pu and is delivering real power (P) of 0.6 pu to the bus. Assume the infinite bus voltage to be 1.0 pu. Neglect stator resistance. The reactive power (Q) in pu supplied by the generator to the bus under this condition is
Two Generators rated 200 MW and 400 MW are operating in parallel. The droop characteristics of their governor are 4 % and 5% respectively fro no load to full load. The speed changers are so set the governor operate at 50 Hz sharing the full load of 600 MW, in the ratio of their ratings. If the load reduces to 400 MW, how will it be shared among the generators and what will the system frequency be? Assume free governor system. The speed changers of the governors are reset so that the load of 400 MW is shared among the generators at 50 Hz in the ratio of their ratings. What are the no-load frequencies of the generators ?
A 3 phase, star-connected, cylindrical rotor, 10 MVA, 11kV synchronous generator is supplying rated power to a unity power factor load. The terminal voltage and real power input to the machine are kept constant. A purcly inductive load is now switched in parallel to the unity power factor load, so that the load draws power at 0.85 power factor lagging. What is the percentage incrcase in the ficld excitation current under the new operating condition, if the synchronous reactance of the machine is 5N/ phase? Assume lincar flux- current relationship for the field.
Terminal voltage of shunt G1 generator in idle operation is 500 V. The terminal voltage of the G1 generator drops to 470 V if it delivers a load current of 600 A. The idle operating voltage of the shunt G2 generator is 505 V. G2 generator terminal voltage drops to 470 V in case of 400 A load current. These two generators are connected in parallel to feed a load of 400 kW. Voltage-power characteristics of generators are linear. According to this; a. Draw the connection diagram given in the question. b. Obtain the network voltage and the powers of the generators. c. Calculate the current given by each generator to the load.
Electrical machines
Please i want the answer son as possible