A two-stage air compressor (4 3/16” x 2 ⅛” x 3 ½”) operating at 400 rpm is required to deliver 10.5 kg/min of air at a pressure of 8 bar. The intake pressure and temperature are 1bar and 21oC respectively. Assuming that the compression and expansion follow the law of polytropic by pV1.3 = constant. Calculate the following: Item #5. WKHP

A two-stage air compressor (4 3/16” x 2 ⅛” x 3 ½”) operating at 400 rpm is required to deliver 10.5 kg/min of air at a pressure of 8 bar. The intake pressure and temperature are 1bar and 21oC respectively. Assuming that the compression and expansion follow the law of polytropic by pV1.3 = constant. Calculate the following: Item #5. WKHP

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Determine the power required to drive compressor,find the answer correctly ASAP otherwise skip it
Please indicate a diagram. Thanks
Solve both please
The displacement volume of an internal combustion engine is 2.19 liters. The processes within each cylinder of the engine are modeled as an air-standard Diesel cycle with a cutoff ratio of 2.5. The state of the air at the beginning of compression is fixed byp1= 1.6 bar, T1 = 325 Kand V1 = 2.36 liters. If the cycle is executed 2100 times per min, determine: a) the compression ratio, b) the net work per cycle, in kJ, c) the maximum temperature, in K, d) the power developed by the engine, in kW, e) and the thermal efficiency.
Q2 Figure Q2, A turbo-compressor supplies power to the air-condition unit (Refrigerant) with 900.0 kw. Calculate the volume per minute of the gas operating through the unit where the density is 1 Ib/ft. Given Data: TH Atmospheric temperature = 520°R Compressor gas temperature = 607°R CP 0.539, J=778J/S, Conversion factor =33000.0 One-hours power = 746 watts. QH R 900.0kw Figure (Q2), Refrigerant unit TL
Calculate the heat rejected by 1 Kg for a perfect gas has a molecular weight of 26 and a value of Υ=1.26 , RO =8.314 , When : a-The gas is contained in a rigid vessel at 3 bar and 315o C and cooled until the pressure drop to 1.5 bar. b-The gas enters pipeline at 280o C and flow steadily to the end of the pipe where the temperature is 250o C , neglected any change in the velocity of the gas.
4. A single-stage cylinder air compressor is rated at 6.5 cubic meter per minute of air .Suction conditions are 1 atm and 27 deg C and discharge pressure of 1034 KPa. The compression process follows PV1.35 = C. What is the engine Kw power needed to drive the unit if the combined engine-compressor efficiency is 84%?
The displacement volume of an internal combustion engine is 2.15 liters. The processes within each cylinder of the engine are modeled as an air-standard Diesel cycle with a cutoff ratio of 2.5. The state of the air at the beginning of compression is fixed by p1 = 1.6 bar, T1 = 325 K and V1 = 2.36 liters. If the cycle is executed 2100 times per min, determine: a) the compression ratio,b) the net work per cycle, in kJ,c) the maximum temperature, in K,
STEAM PROCESSES
The displacement volume of an internal combustion engine is 2.17 liters. The processes within each cylinder of the engine are modeled as an air-standard Diesel cycle with a cutoff ratio of 2.5. The state of the air at the beginning of compression is fixed by p1 = 1.6 bar, T1 = 325 K and V1 = 2.36 liters. If the cycle is executed 2100 times per min, determine: a) the compression ratio,b) the net work per cycle, in kJ,c) the maximum temperature, in K,d) the power developed by the engine, in kW,e) and the thermal efficiency.
Provide a complete and logical solution for the problem. If linear interpolation is required in the problem, tabulated values is considered as a solution. Also, provide T-S or P-V diagrams for each problem. An ideal Otto engine, operating on the hot-air standard with k=1.34, has a compression ratio of 5. At the beginning of compression, the volume is 6 ft3, the pressure is 13.75 psia and the temperature is 100°F. During the constant-volume heating, 340 BTU are added per cycle. Find the following: a. Percent clearance b. Temperature after heat addition c. Pressure after heat addition d. Efficiency
I need the answer as soon as possible