A technician wearing a brass bracelet enclosing area 0.00500 m2 places her hand in a solenoid whose magnetic field is 4.50 T directed perpendicular to the plane of the bracelet. The electrical resistance around the circumference of the bracelet is 0.0200 S2. An unexpected power failurecauses the field to drop to 1.35 T in a time of 22.0 ms.(a) Find the current induced in the bracelet.(b) Find the power (P) delivered to the bracelet. (Note: As this problem implies, you should not wear any metal objects when working in regions of strong magnetic fields.)W

A technician wearing a brass bracelet enclosing area 0.00500 m places her hand in a solenoid whose magnetic field is 4.50 T directed perpendicular to the plane of the bracelet. The electrical resistance around the circumference of the bracelet is 0.0200 2. An unexpected power failure causes the field to drop to 1.35 T in a time of 22.0 ms. (a) Find the current induced in the bracelet. (b) Find the power (P) delivered to the bracelet. (Note: As this problem implies, you should not wear any metal objects when working in regions of strong magnetic fields.)

A technician wearing a brass bracelet enclosing area 0.00500 m places her hand in a solenoid whose magnetic field is 4.50 T directed perpendicular to the plane of the bracelet. The electrical resistance around the circumference of the bracelet is 0.0200 2. An unexpected power failure causes the field to drop to 1.35 T in a time of 22.0 ms. (a) Find the current induced in the bracelet. (b) Find the power (P) delivered to the bracelet. (Note: As this problem implies, you should not wear any metal objects when working in regions of strong magnetic fields.)

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

For a technical application, an electrical engineer needs to create a solenoid using copper wire with diameter d = 0.500 mm. The resistance of the solenoid needs to be 5.10 2 and the magnetic field of the solenoid with a current of 3.10 A should be 5.90 x 10-2 T. Assume the resistance does not change significantly with temperature, and the radius of the solenoid is 1.00 cm. (Use p = 1.70 x 1080 m for the resistivity of copper.) (a) How many turns of wire does the electrical engineer need? turns (b) Determine the required length (in cm) of the solenoid. cm
A 9.00 - V battery is connected to a coil which has a self-inductance of 125 mH and a resistance of 5.00 Ω. At what rate is energy being stored in the magnetic field of the coil when the current in the circuit is 0.500 Amps? Hint: Apply conservation of energy.
An 820 turn wire coil of resistance 30.00 is placed around a 12500 turn solenoid, 5.60 cm long, as shown in the figure below. Both coil and solenoid have cross-sectional areas of 1.40 x 10 m². 60.0 V 14.00 w 12 500 turns Re 820 turns (a) How long does it take the solenoid current to reach 63.2% of its maximum value? (No Response) ms (b) Determine the average back emf caused by the self-inductance of the solenoid during this interval. (No Response) V (c) Determine the average rate of change in magnetic flux through the coll during this interval. (No Response) V (d) Determine the magnitude of the average induced current in the coil. (No Response) A
Consider the RL direct current circuit shown. The circuit contains R = 4.0 Ω, L = 10 mH, & ε = 12 V. The circuit is charging. (a) Determine the time constant for the circuit? (b) What is the maximum current in the circuit? (c) What is the current one time constant (t = τ )? (d) When the current is 0.5 A, what is the strength of the magnetic field in the solenoid, with n = N/ℓ = 319x103 turns/m. ( T×m/A)
QUESTION 1 https://per.physics.illinois.edu/per/IE/ie.pl?phys112/ie/08/IE_movingcoil X X X X XX X W X X X X XX X X X X X X X X X X X X X X X Lg At t=0, a rectangular coil of resistance R = 2 ohms and dimensions w = 3 cm and L = 8 cm enters a region of constant magnetic field B = 1.6 T directed into the screen as shown. The length of the region containing the magnetic field is LB = 15 cm. The coil is observed to move at constant vėlocity v = 5 cm/s. What is the force required at time t = 0.8 sec to maintain this velocity? Answer in uN (u = micro = EE-06)
A bicycle generator rotates at 1,800 rad/s, producing a 15.5 V peak emf. It has a 45-turn, 1.00 by 3.00 cm rectangular coil in a 0.640 T field. It is driven by a 1.48 cm diameter wheel that rolls on the outside rim of the bicycle tire. (a) What is the velocity of the bicycle? (Enter the magnitude in m/s.) m/s (b) What is the maximum emf (in V) of the generator when the bicycle moves at 10.0 m/s, noting that it was 15.5 V under the original conditions? V (c) If the sophisticated generator can vary its own magnetic field, what field strength (in T) will it need at 5.00 m/s to produce a 9.00 V maximum emf?
It is desired to construct a solenoid that will have a resistance of 4.15 2 (at 20°C) and produce a magnetic field of 4.00 x 10-2 T at its center when it carries a current of 5.00 A. The solenoid is to be constructed from copper wire having a diameter of 0.500 mm. If the radius of the solenoid is to be 1.00 cm, determine the following. (The resistivity of copper at 20°C is 1.7 x 10-8 0 • m.) (a) the number of turns of wire needed to build the solenoid turns (b) the length the solenoid should have cm
A solenoid with 455 turns has a length of 8.00 cm and a cross-sectional area of 2.70 ✕ 10−9 m2. Find the solenoid's inductance and the average emf around the solenoid if the current changes from +4.00 A to −4.00 A in 6.83 ✕ 10−3 s. (a) the solenoid's inductance (in H) (b) the average emf around the solenoid (in V)
At what speed must a sliding rod move to produce an emf of 1.05 V in a 1.54 T field, given the rod's length is 30.3 cm? m/s