Answered: A step-index fiber is constructed with… | bartleby

Related questions

Question

A step-index fiber is constructed with n1 =
1.450, n2 = 1.445, and radius a = 4.0 µm.
(a) Will this fiber be single mode when the
operating wavelength is A = 1.55 µm?
(b) Evaluate the cutoff wavelength Ac (for
LP11) of this fiber.
(c) If the operating wavelength is A = 0.488
um, which LP modes will propagate?
%3D

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

A Radio Tuning Circuit. The minimum capacitance of a variable capacitor in a radio is 4.18 pF. (a) What is the inductance of a coil connected to this capacitor if the oscillation frequency of the L-C circuit is 1600×103 Hz, 1600 × 10 3 Hz, corresponding to one end of the AM radio broadcast band, when the capacitor is set to its minimum capacitance? (b) The frequency at the other end of the broadcast band is 540×103 Hz. 540 × 10 3 Hz . What is the maximum capacitance of the capacitor if the oscillation frequency is adjustable over the range of the broadcast band?
Explain the desirability of an RF amplifier stage in FM receivers as compared to AM  receivers. Why is this not generally true at frequencies over 1 GHz?
The following information applies to Questions 5 through 9. Maximum power from a radio transmitter is delivered to the load when the load impedance is equal to 50 ohms. Assume that when it is connected to a 50 ohm load, the transmitter delivers 100 watts. Imagine that the transmitter is connected to a 50 ohm load through a cable that is 100 ft long. The cable has a characteristic impedance of 50 ohms and a loss of 3 dB per 100 ft. How much power is now delivered to the matched load? Type your answer in watts to one place after the decimal.