A steam turbine is to operate on a simple regenerative cycle. Steam is supplied dry saturated at 40 bar, and is exhausted to a condenser at 0.07 bar. The condensate is pumped to a pressure of 3.5 bar at which it is mixed with bleed steam from the turbine at 3.5 bar. The resulting water which is at saturation temperature is then pumped to the boiler. For the ideal cycle calculate, neglecting feed-pump work, ti) the amount of bleed steam required per kilogram of supply steam; (ii) the cycle efficiency of the plant; (iii) the specific steam consumption. t i r

A steam turbine is to operate on a simple regenerative cycle. Steam is supplied dry saturated at 40 bar, and is exhausted to a condenser at 0.07 bar. The condensate is pumped to a pressure of 3.5 bar at which it is mixed with bleed steam from the turbine at 3.5 bar. The resulting water which is at saturation temperature is then pumped to the boiler. For the ideal cycle calculate, neglecting feed-pump work, ti) the amount of bleed steam required per kilogram of supply steam; (ii) the cycle efficiency of the plant; (iii) the specific steam consumption. t i r

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A ideal rankine power plant cycle uses ammonia as the working fluid. Saturated vapor leaves the…

A: Given:TH=85°CTL=40°C

Q: It has been decided to operate a steam power station on a Rankine Cycle with a relatively high…

A: Given data:Steam power station operates on a Rankine Cycle.Condenser pressure = The steam pressure…

Q: ooking again at problem 1 how would you define the efficiency of the system? whicch components would…

A: In a particular system, efficiency is defined as the ratio of energy output to energy intake.…

Q: In a reheat cycle steam at 8.5 MPa and 490 o C enters the turbine and expands to 1.5 MPa. At this…

Q: Calculate the thermal efficiency and turbine-exit quality for an Ideal Rankine Cycle where the steam…

A: At state 1 P1=4MPa T1=450C h1=3316.1 KJ/Kg S1=6.8185 KJ/Kg-K At state 2 Turbine exit Pcond=15KPa…

Q: a. Calculate the thermal efficiency and turbine-exit quality for an Ideal Rankine Cycle where the…

Q: In a SIMPLERankine cycle, the steam throttled condition is 8 MPa and 480°C. The steam is then…

Q: It has been decided to operate a steam power station on a Rankine Cycle with a relatively high…

A: Process 1 - 2 : Isentropic expansion process (Turbine).Process 2 - 3 : Constant pressure heat…

Q: In an ideal reheat-rgenerative cycle, steam enters the turbine at 6 MPaa and 400 degrees Celsius.…

A: The T-s diagram of the given cycle is where, x and y are the fraction of heat extracted at state 2…

Q: t has been decided to operate a steam power station on a Rankine Cycle with a relatively high…

Q: It has been decided to operate a steam power station on a Rankine Cycle with a relatively high…

A: Process 1 - 2 : Isentropic expansion process (Turbine).Process 2 - 3 : Constant pressure heat…

Q: at 6 MPaa and 400 degrees Celsius. After expansion to 1.4 MPaa steam is withdrawn and reheated to…

Q: power plant operating in a Reheat Rankine Cycle produces steam at 3 MPa, 600oC in the boiler. It…

A: Given:P1=3 MPaT1=600°CTc=45°C

Q: Calculate the work done in the low-pressure turbine (LPT) of a Rankine cycle with reheat. The steam…

A: Reheat:In a reheat cycle the expansion is carried out in two turbines with an intermediate reheat.…

Q: ankine cycle using superheat and reheat applications. Steam enters the stage 1 turbine at 8 MPa and…

A: To determine: : A) the thermal efficiency of the cycle, B) the mass flow rate of the steam, C) the…

Q: With the minimum and maximum pressures set along with the maximum temperature an open feedwater…

A: We are using Fred water heater that means we are using regeneration in the rankine cycle.

Q: simple Rankine cycle uses water as the working fluid. Water enters the pump as a saturated liquid at…

A: The pressure at the pump entry is .The pressure at the pump exit is .The quality of the mixture is…

Q: A simple rankine ideal cycle with water as the working fluid. Twenty kilograms of steam enters the…

Q: 4. Steam at 10 MPa, 600°C enters the first-stage turbine of an ideal Rankine cycle with reheat. The…

Q: A steam power plant operates on a simple ideal Rankine cycle between the sures limits of 8000 kPa…

Q: In an ideal Rankine cycle, steam is at 4.1 MPa and 480°C is generated for steam power plant. The…

Q: (8.3) Steam is supplied to a two-stage turbine at 40 bar and 350°C. It expands in the first turbine…

A: There is a two-stage steam turbine system involved in the issue. This is an overview of the issue:…

Q: A simple ideal Rankine cycle with water as the working fuid operates between the pressure limits of…

Q: ted vapor enters the turbine at 10 MPa, 550 degree Celsius. The condenser pressure is 10 kPa. The…

A: For the cycle net power output is wcycle= wt- wp = m[(h1-h2)-(h4- h3)] m= wcycle(h1-h2)-(h4-h3) Thus…

Q: an ideal rankine cycle that operates the boiler with an outlet temperature 350°C and 30 bar,and the…

A: The Values of Enthalpy ,Entropy ,specific volume at different stages are calculated from the steam…

Q: 1. A 100-MW stean power plant operates on the Rankine cycle but with turbine and pump. o…

A: Given: Wnet˙=100 MW P2=7Mpa T2=555oC Pcond=20Kpa ηT=ηP=0.85

Q: The pressure in the evaporator of a refrigerator is 0.0007 MPa and the pressure in the condenser is…

Q: An ideal vapor-compression cycle uses R-134a as the working fluid. Recall that the compressor…

A: Pressure of the evaporatorPressure of the condenserTemperature at the entry of the…

Q: Problem 1 Consider a simple, ideal Rankine cycle operating with a 15 kPa condenser and a turbine…

A: A steam turbine uses the energy of steam and converts this energy into mechanical work. This…

Q: Steam enters the turbine at 2.5 bar and the condenser at 0.5 bar in an ideal Rankine Cycle.…

A: Pressure of steam at turbine inlet, P3=2.5 barCondenser pressure, Pc=0.5 bar

Q: An ideal Rankine cycle with reheat uses water as the working fluid. As shown below, the conditions…

Q: generative cycle the inlet conditions are 40 bar and 400°C. Steam is Bleed at 10 bars in…

A: Given:P1=40 barT1=400°CP2=10 barP3=0.8 bar

Q: (a) A simple Rankine cycle uses water as the working fluid (Figure Q3). IN gin 4s 4 gout Figure Q3.…

A: Since you have asked a question with multiple parts in a single request we would be answering only…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Trending now

This is a popular solution!

Step by step

Solved in 5 steps with 9 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

In an ideal Rankine cycle, steam generated at 3.546 Mpa and 450°C. The condenser isat 45°C. Determine (a) the ideal pump work, (b) the cycle efficiency, (c) for an enginewith the same end state, determine the engine efficiency.(Note: Draw the schematic and T-s diagram)
The engine on a steam ship runs on the Rankine cycle. The steam leaves the boiler at 20 bar and 350°C. The turbine has an efficiency of 75% and an outlet pressure of 1 bar. The pressure changes in the boiler and condenser can be considered negligible, and the liquid leaving the condenser is saturated. A. Determine the operating temperature of the condenser, and compute the efficiency of a Carnot cycle operating between the boiler and condenser temperatures. B. Determine the actual efficiency of this Rankine cycle and compare it to the Carnot efficiency. C. When the Titanic was sinking, the Carpathia received the S.O.S. and immediately set course to attempt a rescue. The captain of the Carpathia ordered the hot water turned off in the passengers’ cabins (Lord, 1955). What effect do you expect this action had?
In an ideal reheat-rgenerative cycle, steam enters the turbine at 6 MPaa and 400 degrees Celsius. After expansion to 1.4 MPaa steam is withdrawn and reheated to 300 degrees Celsius . Extractions for regenerative heating occur at 0.15 MPaa and 1.4 MPaa and the condenser pressure is 0.1 MPaa. Use mass flowrate of 1 kg/s. Compute for the following 9. Thermal cycle efficiency 10. Thermal engine efficiency
n an ideal rankine cycle. Steam is generated at 4.1 mpa and 480C. The condenser is at 32C. For an engine with the same end states, determine its thermal efficiency, steam rate, and mep. Considering the engine only, assume the brake engine efficiency to be 78%, the generator efficiency 92%, the steam flow rate is 163,600 kg/hr. Compute the output of the combined unit.
A simple Rankine cycle works between the boiler pressure of 4 Mpa and condenser pressure of 30 bar. The steam is dry saturated before the throttling in the turbine. Determine the Rankine cycle efficiency.
Q.8 In a regenerative steam cycle employing one open feed heater, the steam is supplied to the turbine as dry saturated at 40 bar, and exhausted to the condenser at 0.35 bar. The intermediate bleed pressure is 10 bar. Sketch the layout of the plant and show on the temp | entropy diagram the pressure under gone by the steam, neglecting the pump works, calculate: A. The mass of steam bled from the turbine per Kg of steam leaving the boiler. B. The thermal efficiency of the plant. C. The thermal efficiency of the plant without feed heating. D. The heat rate in (kJ/kW.hr) for the plant with and without feed heating.
In a steam power cycle, the steam supply is at 15 bar and in a dry and saturated condition.The condenser pressure is 0.4 bar. Calculate the Carnot and Rankine efficiencies of the cycle.Ignore the work of the pump.
The net power (NOT TURBINE POWER) of the following steam power cycle is desired to be 25MW.Steam enters the turbine at 16 MPa, 450C, condenser at 10kPa pressure saturated liquid-steamIt enters as a mixture. Compressed liquid enters the pump at 9kPa at 35C and at 17MPacomes out. The inlet pressure to the boiler is 16.8MPa and 33C. The output from the boiler is 16.2MPa and 575C.The isentropic efficiency of the turbine is 90%, and that of the pump is 83%. Find the mass flow rate that will provide the required net power.
A Brayton cycle is used to estimate the performance of an aircraft engine with nitrogen as the working fluid. The engine generates a net power of 10 MW. Nitrogen enters the compressor of the engine at 250 K and 80 kPa and is compressed to a pressure of 400 kPa. The gas exits the turbine of the engine at 450 K and 80 kPa.a. Calculate the mass flow rate of nitrogen through the engine.b. Calculate the thermal efficiency of the cycle.c. Determine the irreversibility per unit mass for each process and for the cycle if TH = 1500 K and TL = To = 250 K.d. Which process has the largest irreversibility?
Show complete solutions. In an ideal reheat-regenerative cycle, steam enters the turbine at 8.1547 Mpa and 400.547°C. After expansion to 280.547°C the steam is withdrawn and reheated to 340°C. Extractions for feedwater heating occurs at 1.6547 Mpa and 0.70547 Mpa and condenser pressure is 0.005547 Mpa a) For ideal cycle, find e,? b) Draw the schematic diagram and T-s diagram with label.
A simple ideal Rankine cycle with water as the working fluid operates between the pressure limits of 3 MPa in the boiler and 30 kPa in the condenser. If the quality at the exit of the turbine cannot be less than 80 percent, what is the maximum thermal efficiency this cycle can have? Use steam tables. The maximum thermal efficiency is %.