A spring with 12 active coils and a spring index of 9 supports a static load of 220 N with a deflection of 120 mm. Theshear modulus of the spring material is 83 GPa. Determine the solid height.Working stress is 63 ksi, G = 10,800 ksi.Solution HintIterationShear StressSolid HeightAnswer:4.906 in

Given data as per the question Active coils =12Spring index =9static load =220NDeflection =120…

Answered: A spring with 12 active coils and a…

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1/A coil spring with plain ends that are ground is to operate with a load that fluctuates between 200 and 400 N, during which the deflection is to vary by 13 mm. Steel spring wire is to be used with a mean coil diameter D of 51 mm as shown in figure (1). Determine appropriate value for safety factor for this case, and find the other dimensions of the spring. If the spring material is steel with the ultimate strength of 2010 MPa and the rigidity of 80 GPa.
The bell crack mechanism shown in Figure is in equilibrium for an applied load of F1- 15KN at A and F2 at C. The pin at B has a diameter of 12mm. The thickness of the bell crank is 8mm while the support bracket has a thickness of 6mm. The bell crank and the support bracket each have an ultimate bearing strength of 550 MPa. a = 300 mm; b = 150 mm ; c = 100 mm; e = 65° %3D %3D 30° (2) Bell crank B F2 b. a F1 H-8 mm BLI Bracket 6 mm mm Connection detail Determine the magnitude of the resultant reaction force acting at pin B. (in KN).
2. A helical valve spring is to be designed for an operating load range of approximately 90 to 135 N. The deflection of the spring for the load range is 7.5 mm. Assume a spring index of 10. Permissible shear stress for the material of the spring = 480 MPa and its modulus of rigidity 80 kN/mm2. Design the spring. 4С - 1 0.615 , C being the spring index. Take Wahl's factor %3D 4С - 4 [Ans. d = 2.74 mm ; D = 27.4 mm ; n = 6]
A close-coil helical spring is to have a stiffness of 1,000 N/m in compression, with a maximum load of 50 N and a maximum shearing stress of 125 N/mm². The solid length of the spring is 50 mm. Find the wire diameter, mean coil radius, and a number of coils. G= 54,000 N/mm². (Assume shear stress is produced only due to the torque produced in the wire due to axial loading).
The bxd xhrubber blocks shown are used in a double U shear mount to isolate the vibration of a machine from its supports. An applied load of P- 750 N causes the upper frame to be deflected downward by 4.9 mm. Determine the average shear strain and the shear stress in the rubber blocks. Assume b 16 mm, d 28 mm, and h= 28. Double U anti-vibration shear mount Rubber block dimensions Shear deformation of blocks Answers: Average shear strain- rad. Average shear stress- kPa. 478316
The ratio of stress to bulk modulus for compression of the material. Select the correct response. Dilatation Modular ratio Bulk's ratio Deformation < Previous
The specifications for a coil spring are known. Infinite fatigue life is required, using a safety factor of 1.3 applied to the maximum load only. The fatigue strength can be represented by a line between τmax= 600, τmin= 0 and τmax= τmin= 900 MPa.Assume both end plates are in contact with nearly a full turn of wireand that the end plate loads coincide with the spring axis.Determine a suitable combination of d, D, and N, if C = 8
The bxdxhrubber blocks shown are used in a double U shear mount to isolate the vibration of a machine from its supports. An applied load of P = 480 N causes the upper frame to be deflected downward by 4.9 mm. Determine the average shear strain and the shear stress in the rubber blocks. Assume b = 21 mm, d = 26 mm, and h = 23. Double U anti-vibration shear mount d P h Rubber block dimensions Shear deformation of blocks Answers: Average shear strain = i rad. Average shear stress = КРа.
=3-456 Nm (Ans.) Example 14-8. For a close-coiled helical spring subjected to an axial load of 300 N havina 12 coils of wire diameter of 16 mm, and made with coil diameter of 250 mm, find: (i) Axial deflection; (ii) Strain energy stored; OVed
I need the answer as soon as possible
Problem 5-4 An open-coiled helical spring of 5 cm mean dia- meter is made of steel of 6 mm diameter. Calculate the number of turns required in the spring to give a deflection of 12 mm for an axial load of 250 N if the angle of helix is 30°. Calculate also the rotation of one end of the spring relative to the other if it is subjected to an axial couple of 12-5 N.m. E = 210 GPa and G = 84 GPa. %3D %3D
Calculate the Force P applied according to the spring compression 0.02 m with the spring stiffness coefficient K=4 kN/m under the influence of the Force P applied to the cable in the figure?

SEE MORE QUESTIONS

Recommended textbooks for you

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Control Systems Engineering

Mechanical Engineering

ISBN:

9781118170519

Author:

Norman S. Nise

Publisher:

WILEY

Mechanics of Materials (MindTap Course List)

Mechanical Engineering

ISBN:

9781337093347

Author:

Barry J. Goodno, James M. Gere

Publisher:

Cengage Learning

Engineering Mechanics: Statics

Mechanical Engineering

ISBN:

9781118807330

Author:

James L. Meriam, L. G. Kraige, J. N. Bolton

Publisher:

WILEY

SEE MORE TEXTBOOKS

A spring with 12 active coils and a spring index of 9 supports a static load of 220 N with a deflection of 120 mm. The shear modulus of the spring material is 83 GPa. Determine the solid height. Working stress is 63 ksi, G = 10,800 ksi.