A spherical ball of 5.5-cm diameter whose properties are roughly = 0.6 W/m2.°C and a = 0.14x10-6 m²/s. The initial temperature of the sphere is 8°C and is lowered into 97°C. If the convection heat transfer coefficient is 1400 W/m2.°C, determine time required for the center of the sphere to reach 70°C.

A spherical ball of 5.5-cm diameter whose properties are roughly = 0.6 W/m2.°C and a = 0.14x10-6 m²/s. The initial temperature of the sphere is 8°C and is lowered into 97°C. If the convection heat transfer coefficient is 1400 W/m2.°C, determine time required for the center of the sphere to reach 70°C.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1 kg aluminum dumbbell initially held 2 meters above the floor is allowed to fall. This experiment is performed inside a room whose dimensions are 10m— 5m— 3m. Assuming that thewalls of the room do not conduct heat and that the room is empty (no other objects are present besides the dumbbell itself), estimate the change of the temperature inside the room as a result as a result of dropping the dumbbell.
An ice chest whose outer dimensions are 30 cm*40 cm*40 cm is made of 3 cm thick Styrofoam (k = 0.033 W/m°C). Initially, the chest is filled with 30 kg of ice at 0 °C, and the inner surface temperature of the ice chest can be taken to be 0 °C at all times. The heat of fusion of water at 0 °C is 333.7 kJ/kg, and the surrounding ambient air is at 20 °C. Disregarding any heat transfer from the 40 cm*40 cm base of the ice chest, determine how long it will take for the ice in the chest to melt completely if the ice chest is subjected to (a) calm air and (b) winds at 30 km/h (assume the heat transfer coefficient on the front, back and top surfaces to be the same as that on the side surfaces). Use the thermophysical properties of air as follows: k = 25.5×10-3 W/mK, ν = 15×10-6 m2/s, α = 21.1×10-6 m2/s, and β = 3.43×10-3 K-1.
A 100-liter water tank is heated from a 2-kW electrical source. The water is heated up from 20∘C and reached into a terminal temperature of 70∘C. How much is the thermal resistance of the tank? (specific heat of water Cp=4.2kJ/kg)
A brass wire of 0.8 mm in diameter and 12 m long is annealed in an annealing furnace at a temperature of 400°C. Find the time required for the wire to reach the temperature of 150°C if the temperature of the wire before placing it inside the furnace is 30°C. Take h = 35 W/m2 K. Density = 8500 kg/m3. Specific heat = 0.335 kJ/kg K.
Q-2/ An office room has an area of 7*5 square meter and 4m height, this room is heated by the radiator of a steam-heating system. The steam radiator transfers heat at a rate of 10 MJ/h, while a 100-W fan is used to distribute the warm air in the room. During this process, the rate of heat loss from the room is estimated to be about 5 MJ/h. If the initial temperature of the room air is 15°C. Determine; how long it will take for the air temperature to rise to 25°C. Assume constant specific heats at room temperature and the parametric pressure is I bar.
a wire is submerged in a liquid at 110 degrees Celsius where the convective heat transfer coefficient is 4000 W/m^2K Determine the temperature at the center of the wire in degrees celsius
A wall with a thermal conductivity of 0.50W/m·K is maintained at 40.0°C. The heat transfer through the wall is 250.0W. The wall surface area is 1.50m2 and its thickness is 1.00cm. Determine the temperature at the outside surface.