A solid circular steel section fixed at the base and pinned at the top is used as a compression member. The member has diameter, d=163mm and length, L=4.5m with lateral support at 0.2L from the base support. Using A36 steel (Fy=248MPA), Calculate the maximum service liveload (if LL=2.4DL) in KN using LRFD that the member can carry. Express your answer in 2 decimal places.

A solid circular steel section fixed at the base and pinned at the top is used as a compression member. The member has diameter, d=163mm and length, L=4.5m with lateral support at 0.2L from the base support. Using A36 steel (Fy=248MPA), Calculate the maximum service liveload (if LL=2.4DL) in KN using LRFD that the member can carry. Express your answer in 2 decimal places.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

please solve 1.1
From the Truss member shown, design all the tension members for ASD and LRFD, if the connection for the angle bars are shown. Use A36 STEEL. 100 mm 150 mm 2.5 m B SERVICE DEAD LOAD =300 KN SERVICE LIVE LOAD = 200 KN 2 m 2 m 2 m 2 m
A W14X120 is used as a tension member in atruss. The flanges of the member are connected to a gusset plate by 3/4 inch boltas shown below. Use A36 steel with Fy-36 ksi and Fu=58 ksi Determine the Yielding Capacity of the section based on LRFD (kips) Determine the Tensile Rupture capacity of the section based on LRFD Determine the Demand to Governing Capacity Ratio (based on yielding and rupture only) if the Demand load carried by the section are DL=200 kips LL=400 kips use LRFD Properties and Dimension Ag=35.30 in^2 x = 6.24 in ry= 3.74 in d=14.5 in tf=0.94 in bf=14.7 in tw=0.59 in k=1.54 d=14.5 Y k1=1.5 bf=14.7 tf-0.94 X -tw=0.59 H
Select a WT section for the compression member shown in Figure . The load is the total service load, with a live-to-dead load ratio of 2.5:1. Use Fy 5 50 ksi. a. Use LRFD. b. Use ASD
please include the FBD
Example 2: A frame work's parameter is: P = 1000 kN, L = 1m, E = 210 GPa, A = 6.0 x 10-4 m² element 1 and 2, A = 6v2 x 10-4 m2 element 3. Find the displacement and constraint forces 3 45° X
Problem 4. A tension member made of plate 12x1/2 is connected to a % inch thick gusset plate with bolts as shown in the figure. Bolt diameter is 1 inch. Both tension member and gusset plate are made of Grade 50 steel. (a) Find the net and effective areas of tension member. (b) Identify the maximum factored axial load that the tension member can carry. dolt 4@2inch= 8 inch 4@2.5inch=10 inch PL 12x1/2 Cross section
please solve 1.3
Q3) The beam shown in Figure below has lateral support at the ends only. The concentrated loads are live loads. Use A992 steel and select a W shape. (Do not check deflections. Use C-1). 23 k 25 k ttst
Select a WT section for the compression member shown in Figure. The load is the total service load, with a live-to-dead load ratio of 2.5:1. Use Fy 5 50 ksi. a. Use LRFD. b. Use ASD 21' 175 k 1
Select the lightest W section for the column shown in the accompanying figure. The loading is 30 kips dead load and 120 kips gravity live load. The member is built into a wall so that it may be considered as continuously braced in the weak direction. Note: Not all of the variable W sections are included in the AISC Manual "Available Strength in Axial Compression" tables. Use (a) A992 steel; (b) Fy = 60 ksi
Select the lightest double angle compression member to carry 110 kips dead load and 130 kips live load. The effective length KL = 20 ft. Assume the backs of the angles are separated by a f-in. gusset plate. Indicate the orientation of the angle legs (i.e., short or long legs back-to- back). If angles are selected for all three steels, indicate the economical choice if relative costs are A36 (1.0), Fv = 50 (1.07), and Fv = 60 (1.10). Use (a) A36 steel; (b) Fv = 50 ksi; (c) Fy = 60 ksi.