A siphon is a device in which liquid is transferred from one place to another without requiring any pumppower. A tank is filled with water, and a valve at the top is open to the atmosphere. A siphon is used to drainwater as shown in the figure below where X = 4.6 m and Y = 0.9 m. The siphon has the outside diameter(OD) of 50 mm and the wall thickness of 1.5 mm. Any loss can be ignored.WaterYX+B50-mm ODx 1.5-mm wall25-mm diameter(a) What is the volume flow rate of water at the nozzle exit?(b) Evaluate the pressure at points A and B.(c) What is the distance X required to obtain a volume flow rate of 7.1 x 10-3 m³/s?(d) It is required that the siphon transport water at the volume flow rate of 5.6 x 10-3 m³/s. What is themaximum allowable distance Y when the gauge pressure at B is -18 kPa.

Answered: Image /qna-images/answer/4ccfa98d-f2aa-4a5e-a53a-cfccc1c8da3b.jpg

A siphon is a device in which liquid is transferred from one place to another without requiring any pump power. A tank is filled with water, and a valve at the top is open to the atmosphere. A siphon is used to drain water as shown in the figure below where X = 4.6 m and Y = 0.9 m. The siphon has the outside diameter (OD) of 50 mm and the wall thickness of 1.5 mm. Any loss can be ignored. Water X 50-mm OD - x 1.5-mm wall -25-mm diameter (a) What is the volume flow rate of water at the nozzle exit? (b) Evaluate the pressure at points A and B. (c) What is the distance X required to obtain a volume flow rate of 7.1 x 10-³ m³/s? (d) It is required that the siphon transport water at the volume flow rate of 5.6 x 10-3 m³/s. What is the maximum allowable distance Y when the gauge pressure at B is -18 kPa.

A siphon is a device in which liquid is transferred from one place to another without requiring any pump power. A tank is filled with water, and a valve at the top is open to the atmosphere. A siphon is used to drain water as shown in the figure below where X = 4.6 m and Y = 0.9 m. The siphon has the outside diameter (OD) of 50 mm and the wall thickness of 1.5 mm. Any loss can be ignored. Water X 50-mm OD - x 1.5-mm wall -25-mm diameter (a) What is the volume flow rate of water at the nozzle exit? (b) Evaluate the pressure at points A and B. (c) What is the distance X required to obtain a volume flow rate of 7.1 x 10-³ m³/s? (d) It is required that the siphon transport water at the volume flow rate of 5.6 x 10-3 m³/s. What is the maximum allowable distance Y when the gauge pressure at B is -18 kPa.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Somewhere along the middle of a horizontal pipe which has a constant diameter of 10 cm a water pump is installed. At the inlet of the horizontal pipe, the pressure is 101,325 Pa. The water then exits the pipe with a pressure of 130,000 Pa. What is the head added by the pump in meters? Take the specific weight of water as 9810 N/m^3. Round your answer to 3 decimal places. Add your answer
36
You and a friend plan to throw one end of a hose over a tall fence to siphon water from your side to the other side. Your friend says it doesn't matter how high the fence is, it will always work as long as your end of the hose is higher than the other side. However, you remind him that isn't actually true. What is the potential problem and about how high can the fence be (in meters) before it becomes an issue?
Find the difference in pressure head and velocity of flow of an oil through a pipe, when the difference of mercury level in a different U-tube manometer connected to the two tappings of the pitot tube as 108 mm. Take co-efficient of the pitot tube ("L" shaped measuring instrument) as 0.9 and sp. gr of oil = 0.8 Difference in pressure head (unit in mm) = Velocity of flow (unit in km/hr) =
a. A U tube differential manometer containing mercury was used to measure the difference of pressures in two pipes containing ethylene glycol. The difference in mercury level is 0.8 m, the level of ethylene glycol in left limb from mercury level to center of the left pipe is 1.8 m and the level of ethylene glycol in right limb from mercury level to center of the left pipe is 0.8 m. Find the head difference in m. S for ethylene glycol = 1.1, S for mercury 13.6. b. Draw a neat diagram shows all parameters. c. Discuss the differences between normal U tube and differential U tube manometers. (sub divisions b and c, upload the document) Difference in heads in m
5. Consider two tanks, A and B, each with a large opening at the top. The two tanks contain different liquids. A small hole is made in the side of each tank at the same depth h below the liquid surface, but the hole in tank A has three times the cross-sectional area of the hole in tank B. (a) If it is known that the mass flow rate is the same for the two holes, find the ratio of PALPB of the densities of the liquids in tanks A and B. (b) (c) equal volume flow rates, what height above the hole must the liquid in tank A be just then? Find the ratio RVAIRVB of the volume flow rates from the two tanks. At one instant, the liquid in tank B is 90 cm above the hole. If the tanks are to have
For the tank in the figure, calculate the volumetric flow of water, which comes out through a pipe, the tank is sealed and there is a pressure of 140 KPa above the water, the depth is h1=2.5M
Please could you state which formulae you are using before applying it so I can see how the question is answered Thanks
The cylindrical in the figure is filled with 31.4 m3 of water at t = 0. The radius of the tank is 1 m and its height is 10 m. There is an outlet line with a radius of 0.2 m at the bottom of the tank. a. What is the time required for half of the water in the tank to drain after the outlet line is opened?b. The flow velocity of water from the bottom of a water tank is related to the height of the water in the tank, and this relation is v² = 2gh where v: (m / s) linear flow velocity, g: gravitational acceleration (10 m / s2) and h: (m) height.
On a trip to the beach (Patm 1 atm or 101.3 kPa), a car runs out of gasoline and it is necessary to siphon gasoline from a Good Samaritan's car. The siphon is a hose with a small diameter and to start the action it is necessary to insert one end into the tank full of gasoline, fill the hose with it through suction and then put the other end in a can that is placed under the tank level. The difference in pressure between point 1 (on the free surface of the gasoline in the tank) and point 2 (at the outlet of the tube) causes the liquid to flow from the highest elevation to the lowest. In this case, point 2 is located 0.75 m below point 1, and point 3 is 2 m above 1. The siphon diameter is 4 mm and friction losses in it must be ruled out. Determine: a) theminimum time to bring 4 L of gasoline from the tank to the can and b) the pressure at point 3. The density of the gasoline is 750 kg / m3.
write your assumptions
A tank filled with 2125 Liter water emptied within 25 minutes. What is the flow rate in m³/h?