A simply supported beam AB supports a trapezoidally distributed load (see figure). 44 kN/m 22 kN/m A 4 m The intensity of the load varies linearly from 44 kN/m at support A to 22 kN/m at support B. Calculate the shear force V (in kN) and bending moment M (in kN - m) at the midpoint of the beam. (Use the deformation sign convention.) V = kN M = kN - m

A simply supported beam AB supports a trapezoidally distributed load (see figure). 44 kN/m 22 kN/m A 4 m The intensity of the load varies linearly from 44 kN/m at support A to 22 kN/m at support B. Calculate the shear force V (in kN) and bending moment M (in kN - m) at the midpoint of the beam. (Use the deformation sign convention.) V = kN M = kN - m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Plz do it correctly asap.
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 14200 ksi] rods, and a solid steel [E = 31400 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.68 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.54 in. Assume L1=44 in and L2=81 in. If all bars are unstressed before the load Pis applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P = 25 kips is applied. (2) (1) L2 (1) L1 A B Answers: i ksi. 02 = ksi.
Solve the bending stress about the y-axis at points A and B. Indicate if the stress is in tension or compression. 200kN m B 200mm ▶44 15mm 200mm A 400mm 20mm
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 15,000 ksi] rods, and a solid steel [E = 30,000 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.500 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.360 in. If all bars are unstressed before the load P is applied, determine the normal force in steel rod (2) after a load of P = 36 kips is applied.
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 13700 ksi] rods, and a solid steel [E = 32600 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.84 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.5 in. Assume L1=37 in and L2=66 in. If all bars are unstressed before the load P is applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P = 27 kips is applied. (2) (1) L2 (1) L1 A P
The simply supported beam shown carries a load that varies from zero at A to 48KN/m at B. Compute (a) slope of the elastic curve at A; (b) slope of the elastic curve at B; (c) deflection 4m to the right of A. EI = constant 48 kN/m 6 m
A cross-section is subjected to a maximum shear of V=160 kN (see figure): Determine the centroid of the cross-section. Calculate the moment of inertia (I) of the cross-section. Determine the shear stress at point A in the cross-section.
Question 5) The horizantal cantilever rigid beam AB has no mass and it is supported by an elastic rod at point C. The modulus of elasticity of the BC rod is E=200 GPa with cross-sectional area of 4=200 mm'. Calculate the magnitude of the distributed load q acting on the system so that the BC rod can be elongated by 2 mm. FEA 3m rigid B A 2m 1.5m
A symmetrical beam of length 300 mm is loaded with a force of 414 N downwards (positive z) and has the following equation for the vertical displacement: F w (x) = E, ( - +4) %3D Ely 8. The value of E is 200,000 Nmm 2 and the values of ly is 20 x 106 mm4 The maximum value of z for the beam cross section is 20 mm What is the maximum tensile stress in the beam at the point when x = 86 mm? Express your answer in Nmm2, as a number to 2 dp, without the units.
The frame supports the distributed load shown. Determine the state of stress acting at points E and D. Show the results on a differential element at this point. 4 kN/m DA -1.5m-15m+ 3 m 1 BA 20 mm 60 mm 20 mm. 5m T D 50 mm
The slope of the shear diagram is equal to Select one: a. Rotational moment b. Distributed load intensity С. Bending moment d. Total weight
Q1: A simply supported beam and its cross section are shown in Figure. The beam carries a load of (10 kN) as shown. Its self-weight is (3.5 kN/m). Calculate the maximum bending stress at X- X. 3.5 kN/m 1.2 m B 1 10 kN 1.2 m 1.2 m 3.6 m 100 T 150 mm Hole T 300 200 200 --