Answered: A simple pendulum is made with a 0.60 m… | bartleby

Related questions

Question

A simple pendulum is made with a 0.60 m long string and a 25-g mass. It is pulled away from equilibrium by 10°. What is the restoring torque on the mass at this location?

How, if at all, does this torque change during the swing?

Expert Solution

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

A 13.2-kg object hangs in equilibrium from a string with a total length of 6.00 m and a linear mass density of ? = 0.00500 kg/m. The string is wrapped around two light frictionless pulleys that are separated by a distance of d = 2.00 m. Two figures show a system of two pulleys and a block of mass m attached to each other with string in a triangular arrangement. The pulleys are at the top left and top right of the triangle, separated by a distance d. The block connects directly to the bottom corner of the triangle, pulled downward by gravity vector g. In figure (a), the string connecting the pulleys is completely horizontal and unmoving. In figure (b), the string connecting the pulleys is oscillating as a standing wave such that there is one and a half wavelengths between the pulleys. (a) Determine the tension in the string. N(b) At what frequency must the string between the pulleys vibrate in order to form the standing-wave pattern shown in Figure b?
The operation of the fuel pump for an automobile depends on the reciprocating action of the rocker arm ABC, which is pinned at B and is spring loaded at A and D. The smooth cam C is in the position shown. The vertical force acting on the rocker arm at A is F₁60 N, and at C it is Fo 155 N (Eigure 1) Figure 50 mm Figure 10 mm 50 mm The operation of the fuel pump for an automobile depends on the reciprocating action of the rocker arm ABC, which is pinned at B and is spring loaded at A and D. The smooth cam C is in the position shown. The vertical force acting on the rocker arm at A is F =60 N. and at C it is Fe=155 N. (Figure 1) 20 mm- 10 mm 1 of 1 mm. 1 of 1 Part A Z Determine the and y components of the reaction force on the rocker arm ABC at the pin for equilib Express your answers using three significant figures separated by a comma. 195] ΑΣΦ | 11 | voc | B₁, B,= Submit Part B Part B Fo Submit Request Answer Determine the magnitude of the force along the spring DF for equilibrium.…
A small ball of mass 0.90 kg is attached to one end of a 1.20-m-long massless rod, and the other end of the rod is hung from a pivot. When the resulting pendulum is 23° from the vertical, what is the magnitude of the torque about the pivot?
A torque of 12 N*m is applied to a solid uniform disk with a radius of .5 meters that causes the disk to accelerate at 5.7 rad/s^2. What is the mass of the disk?
Help me please The force-torque system acting on O is equivalent to the key acting on A. If R = 600i + 1400j + 700k lb and | C | = 1200 lb ⋅ pie, determine CR
Engineers are designing a system by which a falling mass m imparts kinetic energy to a rotating uniform drum to which it is attached by thin, very light wire wrapped around the rim of the drum (the figure (Figure 1)). There is no appreciable friction in the axle of the drum, and everything starts from rest. This system is being tested on earth, but it is to be used on Mars, where the acceleration due to gravity is 3.71 m/s2. In the earth tests, when m is set to 13.0 kg and allowed to fall through 5.00 m, it gives 300.0 J of kinetic energy to the drum. If the system is operated on Mars, through what distance would the 13.0-kg mass have to fall to give the same amount of kinetic energy to the drum? How fast would the 13.0-kg mass be moving on Mars just as the drum gained 300.0 J of kinetic energy?
Two circular cylinders have the same mass and dimensions, but one is solid while the other is a thin hollow shell. If they are released together to roll without slipping down the plane, inclined at 30° to the horizontal, how far apart will they be after 10 seconds? mg sin 30 ng cos 30 30 mg
= A pendulum consists of a rod of mass 1.80 kg and length L 1.00 m with a solid sphere at one end with mass 0.320 kg and radius 24.0 cm (see the following figure). If the pendulum is released from rest at an angle of 0 = 29.0°, what is the angular velocity at the lowest point? Axis A Part 1 + To solve this problem it will be necessary to first find the moment of inertia of the pendulum. What is its moment of inertia? Part 2 + What is the initial gravitational potential energy of the pendulum? Define the gravitational potential energy to be zero when the pendulum is at its lowest point. Part 3 What is the angular velocity of the pendulum at its lowest point?
A solid cylinder of mass M = 1.06 kg and radius R = 13.0 cm pivots on a thin, fixed, frictionless bearing (see Figure). A string wrapped around the cylinder pulls downward with a force F = 3.139 N. Consider that instead of the force F, a block with mass m = 0.32 kg (with force F = 3.139 N) is attached to the cylinder with a massless string: The cylinder is changed to one with the same mass and radius, but a different moment of inertia. Starting from rest, the mass now moves a distance 0.5647 m in a time interval of 0.57 s. Find Icm of the new cylinder.
A cylindrical metal drum, with a radius of 0.25 m, has an inertia of 11.0.kg. The drum is hollow and you may neglect the inertia of the top and bottom of the drum. The drum is free to rotate about an axle that runs through its centre and along its long axis. A cord is wrapped around the drum. The cord is pulled straight from the drum with a constant force of 60 N. As the cord unwinds, the drum rotates, with no slippage between the cord and the drum. (a) Calculate the work done by person pulling the cord as the drum rotates through 100 radians. Give your answer in Joules (b) Assuming the drum starts from rest, what is the rotational speed of the tyre after it has rotated through 100 radians? Give your answer in rad.s
The smooth hollow tube assembly rotates about a vertical axis with angular velocity ω=θ˙=3.8ω⁢=θ˙=3.8 rad/s and ω˙=θ¨=−2.4ω˙=θ¨=-2.4 rad/s2. A small 0.23-kg slider P moves inside the horizontal tube portion under the control of the string which passes out the bottom of the assembly. If r=0.88r=0.88 m, r˙=−1.9r˙=-1.9 m/s, and r¨=3.8r¨=3.8 m/s2, determine the tension T in the string and the horizontal force Fθ exerted on the slider by the tube. T is positive in tension, and Fθ is positive if in the positive θ direction.