A sample soil for proposed building-the engineer in-charge decided to under go soil testing. A 480 cubic centimeter (cc) soil sample taken from the site weighs 850.5 grams. After oven drying, it weighed 594.4 grams. If the specific gravity of solids is 2.72, what will be the result of the void ratio (e) of the soil?

Q: Given: wet soil sample weight 45.6 lbs volume of soil before drying 0.40 cubic ft dry sample wt.…

A:

Q: 0.1.A A soil specimen have void ratio (e) of 0.7, Gs 2.72. Calculate the total unit weight, dry unit…

A: A) Given that soil specimen is having  Void ratio (e) = 0.7 Specific Gravity (Gs) = 2.72 Degree of…

Q: A sample, 75 mm in diameter and 20 mm high was consolidated in an oedometer with drainage at upper…

A: From Given Data :Diameter of the sample D =75  mm ;Height of sample (H) = 20 mm ; Length of drainage…

Q: Following the sieve analysis and the specific gravity of "SAND 1", a hydrometer test was performed…

A: The hydrometer test is used to determine the distribution of soil particle sizes that are smaller…

Q: ple from a site in Escondido was sieved in the lab. The entire sample h which 1200 grams passed the…

A:

Q: A liquid limit test was performed on a soil sample. It was found out that the moisture content at 19…

A:

Q: A Sample of soil was tested in the laboratory with the following results Liquid limit =30% Plastic…

A: we have Liquid limit =30% Plastic limit =12%   U.S. Sieve Size                  Percentage Passing…

Q: What is the maximum weight of the soil sample? B. What is the minimum weight of the soil sample?…

A: GEO TECHNICAL ENGINEERING:

Q: A laboratory test was conducted according to Method A of the ASTM D4318 to find the liquid limit of…

A: The wet mass of the soil sample with the mass of the can is measured, again the dry mass of the…

Q: A liquid limit test was performed on a soil sample. It was found out that the moisture content at 21…

A:

Q: A liquid limit test was performed on a soil sample. It was found out that the moisture content at 12…

A:

Q: The liquid limit (LL) of a soil has been found as 78% and the plastic limit ( PL ) as 37% .…

A: Given data: liquid limit (LL) = 78% plastic limit ( PL ) = 37%  water content (W) = 56 %

Q: A soil sample was taken from a proposed embankment that is to be used as compacted fill for a…

A: Given data:  Maximum dry unit weight, γd,max=19.45 kNm3 Optimum moisture content, w=12.6 % In-situ…

Q: Soil placed on a can has been weighed before and after an oven-drying procedure. The procedure…

A:

Q: limit test was performed on a soil sample. it was found out that the moisture content at 16 blows…

A:

Q: liquid limit test was performed on a soil sample. It was found out that the moisture content at 18…

A:

Q: A liquid limit test was performed on a soil sample. It was found out that the moisture content at 21…

A: No of Blows  Moisture content(%)  21 60 34 29

Q: The results of a standard Proctor test are given in the following table. Given: Mold volume : 1/30…

A:

Q: The laboratory tests on a soil sample reported the values of liquid limit, plastic limit and…

A:

Q: A field permeability test indicates that the coefficient of permeability for a certain soil is 2 *…

A: The coefficient of permeability of a soil mass is defined as “the property due to which the soil…

Q: Classify soil A depicted in the table according to the AASHTO classification system. Sieve analysis-…

A:

Q: A sample of the soil tested in triaxial with dimensions of 38 mm diameter and 76 mm height, its…

A: Diameter of cylinder, Height of cylinder, Mass of sample before drying, Mass of sample after drying,

Q: 4. Phase Diagram A soil sample was obtained at the underground parking garage that Dr. Barry is…

A: Given Data  Total volume of soil (VT) = 0.05 ft3  Total weight of soil (WT) = 4.2 lbs  Weight of…

Q: Give me all answers otherwise leave it A wet sample has a solid grain density of 2700 kg / m3, a…

A: The question can be solved by the formulas, these formulas are important for learning soil mechanics…

Q: I am working on a lab report for a sieve analysis that was conducted in the lab. I got that the soil…

A: Given data; Percentage of Gravel is 20.5% Percentage of sand is 77.8% Percentage of fines is 1.7%…

Q: You are very disappointed that a compressibility experiment is no longer part of the CIE 334…

A:

Q: A Sample of soil was tested in the laboratory, and the test results were listed as follows. Classify…

A:

Q: A sample of soil was retrieved and tested in the laboratory. Its water content was 29%, the bulk…

A: Given information: So, the void ratio =e = 0.816

Q: A compaction test was conducted in a soils laboratory using the Standard Proctor Method B test…

A: In a standard proctor test of a sample The weight of the compact soil specimen plus mold and the…

Q: A 627-g sample of sand was found to have the following amounts of material retained on each…

A: Total weight - 627g To find-  1) Fineness modulus 2) Purpose 3) ASTM C33 criteria

Q: An oven dry sand mass with a dry unit weight of 105pcf and Gs of 2.70 is placed outdoors in a…

A: Given data, Dry unit weight Yd = 105 Pcf G = 2.70 To find :- unit weight of soil after rain

Q: A 5-lb soil sample was taken from a fill. The volume of the hole from which the sample was taken was…

A:

Q: Soil sample and its corresponding properties: SOIL PROPERTIES SOIL SAMPLE % Clay fraction (<2 µm)…

A:

Q: A liquid limit test was performed on a soil sample. It was found out that the moisture content at 17…

A: Liquid limit is water content where no. of blows is 25

Q: Based on the soil classification test, particle passing on sieve No. 200 is 89%, Liquid Limit is 70%…

A: Given data, % passing sieve no. 200 = 89% Liquid limit = 70% Plasticity index = 45%

Q: highway engineering laboratory  test CBR (California Bearing Ratio) 1-  What is the reason for…

A: The California Bearing Ratio (CBR) test is a penetration test used to evaluate the subgrade strength…

Q: | Laboratory testing was performed on two soil samples (A and B). (a) Determine the USCS…

A: Note: We'll answer the first question since the exact one wasn't mentioned. Please resubmit a new…