A resistive impedance of 50 2 is connected in series with two impedances of 100 N and 78+ j34 N which are in parallel, as shown in the diagram. I 50 Q + R1 X, j342 R2 -1002 V R3 78 Ω (i) (ii) Calculate the admittance of the combined parallel branches in polar form. Calculate the input current in polar form when the combined circuit is supplied by 50 20°V. Calculate the output voltage across the parallel branches and the current supplied to the 78+ j34 Q branch in polar form. (iii) (iv) Calculate the real and reactive powers delivered to the 78+ j34 Q circuit.

A resistive impedance of 50 2 is connected in series with two impedances of 100 N and 78+ j34 N which are in parallel, as shown in the diagram. I 50 Q + R1 X, j342 R2 -1002 V R3 78 Ω (i) (ii) Calculate the admittance of the combined parallel branches in polar form. Calculate the input current in polar form when the combined circuit is supplied by 50 20°V. Calculate the output voltage across the parallel branches and the current supplied to the 78+ j34 Q branch in polar form. (iii) (iv) Calculate the real and reactive powers delivered to the 78+ j34 Q circuit.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

When the given Delta circuit is converted to Wye circuit, the resistance values in the Wye circuit are: R3 A. B. R1 R2 C. D. Select one: a. Ra = 0.33, Rb = 0.5 , Rc = 1 b. Ra = 0.33 , Rb = 1, Rc = 1 c. Ra 0.5, Rb = 1 , Rc = 1 • d. Ra = 0.5, Rb 0.5, Rc = 1 Clear my choice Question 13
Kindly choose the appropriate and best answer.
what is the phase difference between the following sets of voltages and currents ? graph the relationship
A 15µF capacitor and a 470 ohm resistor are connected in series with a function generator. The supply voltage is 50V RMS 40Hz. Find the reactive power for this circuit.
please do the mesh analysis one
1.Calculate the IL current using the superposition method. 2.In the circuit, the phasors of the capacitor current and voltages are combined with the source phasors in a single phasor. Draw in the diagram.
the circuit shown Find and draw the Norton equivalent circuit with respect to the terminals a and b for R₁ 25/60° Vs 8 Ω 4₁ j5n Ic Τ –j 10 Ω Hli R₂ 6Ω ) la .j5 Ω a
Find voltage across the parallel impedances of the circuit below. -j5 N 5Ω HE 3Ω 100/0° V(A 5Ω j4 2 55/29 - j80/29 V 220/13 + j320/13 V 140/13 + j180/13V -300/13 + j1100/13 V elll
A three phase star connected load has an impedance of 12 + j 18 ohm per phase. A voltage of 440 V 3 phase is supplied to the load. So find apparent power, active power and reactive power
1. For the circuit shown below, use the current divider rule to find the phasors 13 and Vo in polar form: answer: 13 = 7.694 65.3° A, V₁ =¹46.161 Z-24.7° V 1₁ = 940° A ↑ R₁ 15 02 L₁ j8n A₂ www. 4Ω 13↓ с -j6n Hii + V₂ R3 ΖΩ L₂ j5Ω
Please answer correctly. Thank you
A voltage and current applied to a single phase load is v= 28 sin (300t+30°) and i= 14 sin (250t- 20°). Find the single and three phase active and reactive power of the circuit if the voltage and current are in cosine waveform. Phase Angle (Theta) Active Power Reactive Power Three Phase Active power Three phase Reactive Power