A petrol engine with compression ratio of 11:1 was analysed as an air-standard cycle. The inlet pressure and temperature of the air are 101 kPa and 19 °C respectively while the maximum temperature of the cycle is 1,067 °c. The mass flow rate of air through the engine is 605 kg/min when running at its optimum speed. Thake the specific heat capacites at constant pressure as 1.0052 and 0.716 kJ/kgK. Calculate the power obtainable from the cycle in kilo of SI unit to 1 decimal place. Provide the units in the answer.

A petrol engine with compression ratio of 11:1 was analysed as an air-standard cycle. The inlet pressure and temperature of the air are 101 kPa and 19 °C respectively while the maximum temperature of the cycle is 1,067 °c. The mass flow rate of air through the engine is 605 kg/min when running at its optimum speed. Thake the specific heat capacites at constant pressure as 1.0052 and 0.716 kJ/kgK. Calculate the power obtainable from the cycle in kilo of SI unit to 1 decimal place. Provide the units in the answer.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

THERMODYNAMICS The compression ratio of an air-standard dual cycle is 14 and the cutoff ratio is 1.2. During the constant-volume heat addition process, the pressure ratio is 1.5. Determine the thermal efficiency, heat added, maximum gas pressure, and temperature when this cycle is run at 80 kPa and 20 degree celcius at the start of the compression. Make use of the cold-air assumption. Show complete solution on a paper.
The max temperature of an Otto cycle working under air standard conditions is 8000 degrees Celsius. Determine the compression ratio of the cycle if the heat injected in each cycle is 350kJ/kg.
Temperature, Pressure and Volume of air (Y=1.4) at the end of isentropic compression in an air standard Carnot heat engine cycle are 315.6 °C, 120 kPa and 0.05 m³ respectively. The volumetric ratio of the isothermal expansion (2-3) and that of isothermal compression ( V₁ ¹₁-3). The volumetric ratio the isentropic expansion (¹-6) and that of isothermal V/₂ compression (¹= 6). (Please draw a P-V diagram of the Carnot cycle) V₁ Calculate; a) The pressure, minimum Temperature and volumes of other states of the Carnot cycle. [ + b) The heat supplied and rejected by the cycle c) The efficiency of the cycle 星
An Otto cycle operating in an air standard conditions has a peak temperature of 800degree C. If the heat added in each cycle is equal to 350kJ/kg, determine the compression ratio of the cycle.
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 80 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 2150 K. (a) Determine the compression ratio. r = (b) Cutoff Ratio (c) Thermal Efficiency (d) Mean Effective Pressure
MTQ4 The temperature at the beginning of the compression process of an air-standard Otto cycle with a compression ratio of 10 is 21 °C, the pressure is 101 kPa, and the mass flow rate of air in the engine is 580 kg/min. The maximum temperature during the cycle is 1300 °C. Cp = 1.006 kJ/kg K Cv = 0.717 kJ/kg K
The compression ratio of an air-standard dual cycle is 12, and the pressure at the beginning of compression is 14.7 psia, the volume is 75 in3, and the temperature is 100 F. During the heat-addition processes, 0.4 Btu is transferred at constant volume and 1.0 Btu at constant pressure. Determine: (a) the cycle thermal efficiency (b) the pressure at the beginning of heat rejection.
An ideal Diesel cycle has the air inlet temperature and pressure of 25 °C and 92 kPa respectively. The compression ratio is 18:1 while the maximum cycle temperature is 1,127 °C. Take Specific heat at constant pressure and constant volume for air as 1.008 kJ/kg K and 0.713 kJ/kg K respectively. Calculate the absolute temperature after the isentropic compression process to one decimal place and include the correct unit (absolute temperature). Add units
The compression ratio of an ideal diesel cycle working with air is 20. At the beginning of the compression process, the pressure of the air is 100kPa, the temperature is 20°C, and the highest temperature of the cycle is required not to exceed 2250K. Show the cycle in the P-v diagram. Consider specific heats constant at room temperature. k=1.4 CP=1.005kJ/kgK CV=0.718 kJ/kgK R=0.287kJ/kgK a) The input and output heats of the loop, the thermal efficiency of the loop,b) Calculate the average effective pressure of the cycle.
The indicated efficiency is 67%of the corresponding ideal-air-standard Otto cycle of two-stroke SI engine with a compression ratio of 8:1 At 7590rpm, mechanical efficiency is 83.2%, and the volumetric efficiency of 88.4%. The air-fuel ratio (gravimetric, that is by mass) is 12:1 and the calorific value of the fuel is 42 MJ/kg. It has a swept volume of 756 cm³. The air is inducted at 71.5°F and 750.1ltorr. Determine the overall efficiency and brake specific fuel consumption.
An engine working on the Otto cycle has 1 kg of air entering at 315 K and a volume of 0.6 m³ at the beginning of compression cycle. At the end of compression cycle, the volume is 0.05 m³. If the maximum temperature of the cycle is 1,163 K, compute the Mean Effective Pressure (in kPa). Let k = 1.4, = 0.718 kJ/kg-K. Cv=0.718 kj/kg-k
The indicated efficiency is 67%of the corresponding ideal-air-standard Otto cycle of two-stroke SI engine with a compression ratio of 8:1 At 7590rpm, mechanical efficiency is 83.2%, and the volumetric efficiency of 88.4%. The air-fuel ratio (gravimetric, that is by mass) is 12:1 and the calorific value of the fuel is 42 MJ/kg. It has a swept volume of 756 cm³. The air is inducted at 71.5°F and 750.1torr. Determine the mass of air in kg/sec and brake power in KW.