A person on horseback is on a drawbridge which is at an angle e - 20.0° above the horizontal, as shown in the figure. The center is e - 7.05 m long and has a mass of 1,940 kg. A cable is attached to the bridge 5.00m from the hinge and to a point on the wall h- 12.0 m above the bridge. The mass of person plus horse is 1,240 kg. Assume the bridge is uniform. Note that the drawing is not to scale and you may not assume that the cable is perpendicular to the bridge. (Due to the nature of this problem, do not use rounded intermediate values in your calculations-including answers submitted in WebAssign.) mass of the person-horse system is d= 1.00 m from the end of the bridge. The bridge

A person on horseback is on a drawbridge which is at an angle e - 20.0° above the horizontal, as shown in the figure. The center is e - 7.05 m long and has a mass of 1,940 kg. A cable is attached to the bridge 5.00m from the hinge and to a point on the wall h- 12.0 m above the bridge. The mass of person plus horse is 1,240 kg. Assume the bridge is uniform. Note that the drawing is not to scale and you may not assume that the cable is perpendicular to the bridge. (Due to the nature of this problem, do not use rounded intermediate values in your calculations-including answers submitted in WebAssign.) mass of the person-horse system is d= 1.00 m from the end of the bridge. The bridge

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Related questions

Q: A 3 meter long beam with weight 200 N is supported by a hinge at the wall and a vable as shown. A…

A: Maximum tension in the cable, T = 500 N The weight of the beam, Wbeam = 200 N The weight of the…

Q: As shown in the figure below, a uniform beam is supported by a cable at one end and the force of…

Q: A uniform ladder 19.0 ft long is leaning against a friction less wall at an angle of 44.9 degrees…

A: Given information:

Q: A diving board 3.00 m long is supported at a point 1.00 m from the end, and a diver weighing 500 N…

Q: A carpenter and his assistant are to carry a uniform wooden beam, which is 6 m long and weighs 100…

A: Draw the free-body diagram of the system.

Q: A uniform 34.0-kg beam of length equal to 4.55 m is supported by a vertical rope located 1.20 m from…

A: Given information: Mass of the uniform beam m=34.0 kg. Length of the uniform beam l=4.55 m.…

Q: A uniform platform with mass M=30kg and length L=15m is placed on two supports as shown. The…

A: A mass of a uniform platform,

Q: A 2.0 – m uniform rod is 2.0 N. On one end is weight of 4 N (point A) while on the other is a load…

A: The torque exerted on an object with force and the distance from the axis perpendicular to each…

Q: A 15,000 N crane pivotsaround a friction-free axle atits base and is supported by acable making a…

A: Ans.(a) Find the moments around the axle. Take clockwise as positive. For the system to be in…

Q: A 183.6 kg uniform, horizontal beam is hinged at one end and at the other is supported by a cable…

A: Given Data:Mass Angle Length To Determine:The magnitude of the force at the hinge.

Q: A uniform beam of weight 19 N and length 6.0 m is mounted by a small hinge on a wall at it left end.…

Q: A uniform beam of length L possesses a mass of 50.99 kg. The beam is attached by a fixed support to…

A: Disclaimer: “Since you have asked posted a question with multiple sub-parts, we will solve the first…

Q: A uniform L = 6.71 m long horizontal beam that weighs WB= 363N is attached to a wall by a pin…

Q: uniform beam of length ? and mass ? is inclined at an angle ? to the horizontal. Its

Q: A crate with a mass of M = 64.5 kg is suspended by a rope from the endpoint of a uniform boom. The…

A: Given, Mass of the crate, M=64.5kg Mass of the boom, m=119kg Length, l=6.13m θ=52° a. For the…

Q: A 1220N uniform boom is supported by a cable perpendicular to the boom, as seen in the figure below.…

Q: A 520-N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal,…

Q: In the figure 20.0 kg boom of length 4.00 m is supported by a cable that has a breaking tension of…

Q: A diver stands on a diving board with a length of 4.5 m. The diving board is supported by two…

Q: A person on horseback is on a drawbridge which is at an angle 8 = 20.0° above the horizontal, as…

A: See below

Q: em 2 Consider the crane system in (Figure 1). It can be operated so that the steel beam rotates…

Concept explainers

Rotational Equilibrium And Rotational Dynamics

In physics, the state of balance between the forces and the dynamics of motion is called the equilibrium state. The balance between various forces acting on a system in a rotational motion is called rotational equilibrium or rotational dynamics.

Equilibrium of Forces

The tension created on one body during push or pull is known as force.

Question

A person on horseback is on a drawbridge which is at an angle e = 20.0° above the horizontal, as shown in the figure. The center of mass of the person-horse system is d = 1.00 m from the end of the bridge. The bridge
is e = 7.05 m long and has a mass of 1,940 kg. A cable is attached to the bridge 5.00 m from the hinge and to a point on the wall h = 12.0 m above the bridge. The mass of person plus horse is 1,240 kg. Assume the
bridge is uniform. Note that the drawing is not to scale and you may not assume that the cable is perpendicular to the bridge. (Due to the nature of this problem, do not use rounded intermediate values in your
calculations-including answers submitted in WebAssign.)
(a) Determine the tension in the cable (in N).
N
(b) Determine the horizontal force component (in N) acting on the bridge at the hinge.
magnitude
N
direction
--Select-- v
(c) Determine the vertical force component (in N) acting on the bridge at the hinge.
magnitude
direction
-Select--- v
HUTA ATH

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

11.60
A uniform tabletop with a mass of 415kg has a length of 2.50m. A 775kg box is placed 0.800m from one side of the table and a 265kg box is placed 1.80m from the same side of the table. What are the forces from the table legs on the tabletop?
The uniform 19.0 kg beam below is 6.4 m long and is perfectly balanced about a point 1.4 m from the left end. What is the mass of the block? (Hint: when calculating the torque due to the weight of the beam, consider all of its mass to be located at its center of mass.)
A 25-ft crane supported at its lower end by a pin is elevated by a horizontal cable. A 250-lb load is suspended through the cable. The center of gravity of the crane is 10 ft from the pin, and the crane weighs 200 lb. Hint: You don't have to convert the unit since they cancel out on both sides. 25. Find the tension in the cable. T $25016 26. Find the total force acting on the pin. y 27. Find the direction of the force acting on the pin, o = ? 60⁰° W(2001b)
A uniform beam has a length of 17.7 m and a mass of 39.6 kg. The beam is horizontal and resting (in equilibrium) on two supports. One of the supports is located 3.32 m to the right of the beam's center of mass. This support applies an upward force of 245 N to the beam. Ehat distance separates the two supports?
A house painter is standing on a uniform, horizontal platform that isheld in equilibrium by two cables attached to supports on the roof.The painter has a mass of 75.0 kg and the mass of the platform is 20.0kg. The distance from the left end of the platform to where the painteris standing is d = 2.00 m and the total length of the platform is 5.0 m.(a) How large is the force exerted by the left hand cable? (b) Howlarge is the force exerted by the right hand cable? [Hint: You can placeyour axis in any convenient location if the object is not rotating.]
A painter leans a ladder against a wall at an angle of 60˚ to the ground. (Assume the ladder is uniform and the center of mass of the ladder is located at the middle of the ladder.) The ladder is 3.00m long and has a mass of 10.0kg. The person has a mass of 90.0kg. How far up the ladder can the painter climb before it slips if the coefficient of friction is 0.45?
A 3.0kg uniform pole 1.8m long is held horizontal by a hinge to a wall and supported by a cable attached to its center which forms a 45° angle with the pole. A large bird house with a mass of 6.6kg is at the end of tge pole. Find the force that the hinge exerts on the pole.