A load P will be supported by a structure consisting of a rigid bar ABCD, a polymer [E = 2,300 ksi; a = 2.9 × 106/°F] bar (1) and an aluminum alloy [E = 10,000 ksi; a = 12.5 x 106/°F] bar (2), as shown. Each bar has a cross-sectional area of 2.00 in.?. The bars are unstressed when the structure is assembled at 30°F. After a concentrated load of P = 60 kips is applied and the temperature is increased to 100°F, determine the normal force in bar (1). (1) 8 ft 6 ft C 2.5 ft 3 ft 1.5 ft O 6.30 kips O 7.66 kips O 8.23 kips O 5.91 kips O 6.89 kips

Q: When it comes to finding the moment arm, you must use the distance of the line from the pivot to the…

A: Explanation When it comes to finding the moment arm, you must use the distance of the line from the…

Q: 1- For the slider – crank mechanism illustrated in Fig.2 A) Determine all instant centers.

A:

Q: The positive rake angle in a single point cutting tool is used to cut non-ferrous metals and low…

A: Positive rake angle is used to reduce shear strain, low power consumption, low cutting force, Less…

Slope and Deflection

The slope in a deflected beam is described as an angle in radians made by the tangent of the section with the original axis of the beam. The deflection at any point on the axis of the beam is defined as the lateral displacement of the point before and after loading.