A heavy cask (full of wine!) sits on an inclined plane. It is held in place by a rope that is attached to the cask and to a hook further up the inclined plane (at A). The rope comes off of the cask tangent to the cask. The mass of the cask is 40 kg, and the coefficient of static friction between the inclined plane and the cask is 0.25. What is the maximum value of 0 just before the cask begins to slip? Also, what is the tension in the rope when slipping is impending? Finally, if the inclined plane became icy, and the rope didn't break as the cask slipped, what would be remarkable about the lines of action of the W, N and T force vectors once equilibrium was re-established? 0.70 m 40

A heavy cask (full of wine!) sits on an inclined plane. It is held in place by a rope that is attached to the cask and to a hook further up the inclined plane (at A). The rope comes off of the cask tangent to the cask. The mass of the cask is 40 kg, and the coefficient of static friction between the inclined plane and the cask is 0.25. What is the maximum value of 0 just before the cask begins to slip? Also, what is the tension in the rope when slipping is impending? Finally, if the inclined plane became icy, and the rope didn't break as the cask slipped, what would be remarkable about the lines of action of the W, N and T force vectors once equilibrium was re-established? 0.70 m 40

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q3: A 20-kg triangular block sits on top of a 10-kg rectangular block shown in the figure below. The coefficient of friction is 0.40 at all surfaces. Determine the maximum horizontal force P for which motion will not occur. Im
A 250 lb refrigerator is being pushed. You do not know what force P should be applied. The coefficient of static friction between the refrigerator and floor is lg = 0.4. The center of gravity of the refrigerator is at point G. - d2 -- d2 F1 d3 d1 d4 Values for the figure are given in the following table. Note the figure may not be to scale. Variable Value di 4.5 ft d2 1.5 ft d3 2.5 d4 3.5 a. Determine the force P that is needed to overcome friction. b. Determine the location of the normal force r measured from the center of the refrigerator if the force P from part a is applied. c. Determine the minimum force P that is required to tip the refrigerator. d. Will the refrigerator slip or tip first? Round your final answers to 3 significant digits/figures. P= lb ft Pip = lb Will the refrigerator slip or tip first? tip O slip
A 40- kg block is placed on the uniform 10-kg beam, that is supported by the cable, which is attached to the end of the beam. The cable wraps around the pulley, and the cable is connected to the block. If the coefficient of the static friction between the block and the beam is u,-0.6. Neglecting friction forces in the pulley. Determine the maximum distance that the block can be placed from 0 and still remain in eqilibrium. Assume the block will not flip. Distanc Fig. (6) m B Pulley 30 cm
A 25-kg ladder, 4m long rests on a rough floor and against a vertical wall. The ladder makes an angle of 35o with the horizontal as shown. It starts to slip when a man weighing 75 kg has climbed halfway up. If coefficient of friction at the wall is 0.2, determine the coefficient of friction at the floor.
None
Box A weighs 1000N and has a height of H1=3m and width W1=2m. Box B weighs 800N. the static friction coefficient between the boxes is uA=0.7 and the static friction coefficient between box B and the ramp is uB=0.5. Find the max allowable angle for the following instances where no motion occurs, box A and B remain stationary. 1) Box A slides, Box B remains stationary 2) Box A tips, Box B remains stationary 3) Box B slides, Box A remains stationary on block B
A uniform ladder of length 12 mand mass 30 kg rests with one ed on rough horizontal ground and the other end against a smooth vertical wall. The ladder is indined 65°. The coefficient of friction, H, between the ladder and the ground is 0.35. A woman of mass 65 kg is slowly dimbing up the ladder. She wants to know how far up the ladder she can dimb safely. Drawa diagramshowing all the force adting on the ladder when the woman is x metres fromthe foot of the ladder. (a) (b) Find the reaction of the ground on the ladder. (c) Show that the reaction of the wall on the ladder is less than 33.25g By taking moments about the base of the ladder, find how far up th ladder she an dimb safely. (d)
A uniform ladder 5 m long and weighing 80N rests against on a vertical wall at B and one end at A (on the ground). The angle of friction at all contact surfaces is 21.8°. Find the smallest angle 0 at which the ladder can be inclined with the horizontal before it is on its verge of slipping.
Q1) Yousif pushes toward the right on an 11.0 N force on the box in the opposite direction. The magnitude of the kinetic friction force between the box and the very smooth floor is 4.50 N as the box slides toward the right. Also, the magnitude of the normal force is 98 N. For the above information, find the following? a box with a force of magnitude 31.0 N. Sarah applies 6. The free-body diagram 7. The mass of the box 8. The box's acceleration in the x-direction 9. The box's acceleration in the y-direction 10. coefficient of dynamic friction Q 2) A rope pulls the block up the ramp, as shown in the figure. Find the following: 7. Draw a free body diagram for the block. 8. Write the equation that sums the forces on the block that are parallel to the ramp. 9. Write the equation that sums the forces on the block that are perpendicular to the ramp. 10. What is the acceleration of the block perpendicular to the ramp? 11. What is the friction force? a = 4.3 m/s? T = N A = 0.45 6.0 kg 0= 30°…
Consider the system shown below. The incline plane is fixed and the coefficient kinetic friction between M and 2M is ?1, and coefficient kinetic friction between the plane and 2M is ?2. Let M=2.0kg, ?=22o, ?1=0.14, and ?2=0.25. (a) What is the magnitude of the frictional force on mass M? (b) What is the magnitude of the total frictional force on mass 2M? (c) What is the acceleration of mass M? (d) What is the acceleration of mass 2M?
7. Draw a free body diagram of the crate. Also, answer the multiple choice question.
(a) A body of weight 45 N is placed on a rough horizontal plane. To just move the body on the horizontal plane, a push of 30 N inclined at 11° to the horizontal plane is required. Find the coefficient of friction. (b) Determine the number of members in a structure, if the total number of joints in the structure is 6.