A gas-turbine power plant operates on the simple Brayton cycle with air as the working fluid and delivers 30.00 MW of power. The minimum and maximum temperatures in the cycle are 310 and 900 K, and the pressure of air at the compressor exit is eight times the value at the compressor inlet. Assuming an isentropic efficiency of 80 percent for the compressor and 86 percent for the turbine, determine the mass flow rate of air through the cycle using constant specific heats at room temperature. The properties of air at room temperature are cp = 1.005 kJ/kg . K and k=1.4. The mass flow rate of air through the cycle is [ kg/s.

A gas-turbine power plant operates on the simple Brayton cycle with air as the working fluid and delivers 30.00 MW of power. The minimum and maximum temperatures in the cycle are 310 and 900 K, and the pressure of air at the compressor exit is eight times the value at the compressor inlet. Assuming an isentropic efficiency of 80 percent for the compressor and 86 percent for the turbine, determine the mass flow rate of air through the cycle using constant specific heats at room temperature. The properties of air at room temperature are cp = 1.005 kJ/kg . K and k=1.4. The mass flow rate of air through the cycle is [ kg/s.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

None
Find the entropy production and determine if the cycle operates irreverisbly, reverisbly, or impossibly. A refrigeration cycle operates between the freezer compartment at 268K and the ambient air at 295K. The rate of heat transfer from the freezer compartment is 8000 kJ/h and the power input for the cycle is 3200 kJ/h. Determine the entropy production for this cycle in kJ/K·h (do not convert h to s). Enter the answer without units, but with a minus sign if applicable. This cycle operates irreversibly reversibly impossibly.
A gas-turbine power plant operates on the simple Brayton cycle with air as the working fluid and delivers 33 MW of power. The minimum and maximum temperatures in the cycle are 310 and 900 K, and the pressure of air at the compressor exit is eight times the value at the compressor inlet. Assuming an isentropic efficiency of 80 percent for the compressor and 86 percent for the turbine, determine the mass flow rate of air through the cycle using constant specific heats at room temperature. The properties of air at room temperature are cp=1.005 kJ/kg-K and k=1.4. The mass flow rate of air through the cycle is kg/s.
A 286-MW steam power plant operates on the Rankine cycle but with turbine and pump efficiencies of 90%. The steam enters the turbine at 10,000 kPa and 550°C. It discharges to the condenser at 50 kPa. Determine the mass fraction of steam that condenses at the turbine exit in percent.
Q3) A steam power plant operates on a simple ideal Rankine cycle between the pressures limits of 8000 kPa and 10 kPa. The mass flow rate of steam through the cycle is 25 kg/s. The temperature of steam at the turbine inlet is 400 C. Show the cycle on a block diagram and on a T-S diagram with respect to saturation lines. Calculate: a- The rate of heat input in the boiler and the rate of heat output in the condenser. b-The thermal efficiency of the turbine.
I need the answer as soon as possible
Q3/A stationary gas-turbine power plant operates on a simple ideal Brayton cycle with air as the working fluid. The air enters the compressor at 95 kPa and 290 K and the turbine at 760 kPa and 1100 K. Heat is transferred to air at a rate of 35000 kJ/s. determine the power delivered by this plant assuming constant specific heats at room temperature.
Let us consider a standard air cycle with variable specific heats, where 0.003 kg of air is added as the working fluid. The complete cycle is composed of:1-2 Addition of heat at v=cte of 95 kPa and 17°C up to 380 kPa.2-3 Isentropic expansion up to 95 kPa.3-1 Heat rejection at P=cte up to the initial state. Determine the net work done by the cycle and the thermal efficiency.
Consider a simple ideal Brayton cycle with air as the working fluid. The pressure ratio of the cycle is 7.2, and the minimum and maximum temperatures are 300 K and 1350 K, respectively. Now the pressure ratio is doubled without changing the minimum and the maximum temperatures in the cycle. Assuming constant specific heats for air at room temperature; show the initial process and process change in a T-s diagram; calculate the change in the net work output per unit mass; and determine the change in thermal efficiency of the cycle.
Please solve this problem, Thank you very much
A power plant uses a gas turbine to produce electricity. Assume that the gas-turbine operates on the ideal Brayton cycle has a pressure ratio of 8. The outside air temperature is 27 C and without preheating, the air is drawn into the compressor. The air compressed in the compressor and its pressure and temperature increase. Thereafter it is supplied into the combustion chamber where its temperature increases to 1023 C at constant pressure. Thereafter, hot air is drawn into the turbine. By considering the air-standard assumptions, determine (a) the gas temperature at the exits of the compressor and the turbine (b) the back work ratio (c) the thermal efficiency
A power plant uses a gas-turbine to produce electricity. Assume that the gas-turbine operates on the ideal Brayton cycle has a pressure ratio of 8. The outside air temperature is 27 C and without preheating, the air is drawn into the compressor. The air compressed in the compressor and its pressure and temperature increase. Thereafter it is supplied into the combustion chamber where its temperature increases to 1023 C at constant pressure. Thereafter, hot air is drawn into the turbine. By considering the air-standard assumptions, determine (a) the gas temperature at the exits of the compressor and the turbine (b) the back work ratio (c) the thermal efficiency