A flotation device is in the shape of a right cylinder, with a height of 0.500 m and a face area of 4.00 m2 on top and bottom, and its density is 0.400 times that of fresh water. It is initially held fully submerged in fresh water, with its top face at the water surface. Then it is allowed to ascend gradually until it begins to float. How much work does the buoyant force do on the device during the ascent?

A flotation device is in the shape of a right cylinder, with a height of 0.500 m and a face area of 4.00 m2 on top and bottom, and its density is 0.400 times that of fresh water. It is initially held fully submerged in fresh water, with its top face at the water surface. Then it is allowed to ascend gradually until it begins to float. How much work does the buoyant force do on the device during the ascent?

Name: A flotation device is inthe shape of a rightcylinder, with a height o
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A flotation device is inthe shape of a rightcylinder, with a height of0.500 m and a face areaof 4.00 m2 on top andbottom, and its density is0.400 times that of freshwater. It is initially heldfully submerged in freshwater, with its top face atthe wa

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An open tank has a vertical partition and on one side contains gasoline with a density =700 kg/m3 at a depth of 4 m, as shown. A rectangular gate that is 4 m high and 2 m wide and hinged at one end is located in the partition. Water is slowly added to the empty side of the tank. At what depth, h, willthe gate start to open?
Consider a frictionless, massless and leak-proof plug blocking a rectangular hole of dimensions 2Rx Lat the bottom of an open tank as shown in the figure. The head of the plug has the shape of a semi-cylinder of radius R. The tank is filled with a liquid of density p up to the tip of the plug. The gravitational acceleration is g. Neglect the effect of the atmospheric pressure. R R g F Sectional view A-A A The force F required to hold the plug in its position is (a) 2pR gL 1- (b) 2pR gL 1+ 4 4 TC (c) TR?p gL (d) PR gL
A 80 cm tall cylinder is filled with water (ρwater = 1000 kg/m3) and oil (ρoil = 600 kg/m3) and is capped on the bottom so no fluid is flowing. It contains equal amounts of the two fluids by weight. What is the pressure at the bottom of the cup?
The left limb of a U-tube mercury manometer is connected to a water pipe line, with the mercury level in the leg (specific gravity = 13.6) 19.685inches below the pipe line's center, and the right limb open to the atmosphere. The right limb's mercury level is 0.4374 yard higher than the left, while the space above mercury in the right limb contains benzene (specific gravity = 0.88) to a height of 0.2 m. Determine the water pressure in the pipe. 9. Specific gravity (S3) Water h3 h2 Z- Specific gravity (S2) -
A tube with diameter of 0.3cm is inserted into water (Surface tension= 0.061N/m). The water in the tube rises to a height of 0.45cm from the surface. Calculate the contact angle between the water and the tube.
A 3m-high, 4m-wide rectangular gate is hinged at the top edge at A and is restrained by a fixed ridge at B. Determine the force exerted on the * .gate at Point B 2 m Water 3 m Gate A,
Solve this question using the Second - order differential equations. Determine whether a cylinder of diameter 20cm, height 30cm, and weight of 19.6N can float in a deep pool of water of weight density 980 dynes/cm3.
The conical-spherical dumbbell (made from a cone and a hemisphere) shown in the figure is floating in a liquid of specific gravity equal to 1.65 such that dumbbell's bottom hemisphere is submerged in the liquid. The bottom of the circular cone and the hemisphere have the same radius equal to R= 18 cm. Obtain the following when the cone has a height, h = 42 cm. (i) The buoyant force acting on the dumbbell (ii) The mass of the dumbbell (iii) The center of buoyancy SHOW ALL OF THE WORK WITH CLEAR AND NEAT WRITING IN STEP BY STEP FOR CREDIT
There is a circular gate at the end of the tank as illustrated. A 6.387 * 10–3 m³ wood block is tied to the end of the gate as illustrated. Density of the wood block is 0.6 g/cm³. Water is at 15.6 °C and Mercury is at 20 °C. What will be the reading h approximately on the mercury manometer on the left side when the gate opens up? Water 50 Wood Hinge 0.4 m Gate D=4 cm Mercury O a. 0.1 m O b.0.14 m c. 0.22 m d. 0.26 m
A square box of side 1 m having mass 40 kg is submergend into the water. A crane used to pull the box upto the surface of the water. Determine how much tension developed into the cable of the crane.
A flotation device is in the shape of a right cylinder, with a height of 0.500m and a face area of 4.00m2 on top and bottom, and its density is 0.400 times that of fresh water. It is initially held fully submerged in fresh water, with its top face at the water surface.Then it is allowed to ascend gradually until it begins to float. How much work does the buoyant force do on the device during the ascent?