Answered: A door 1.00 m wide and 2.00 m high… | bartleby

Related questions

Question

A door 1.00 m wide and 2.00 m high weighs 330 N and is
supported by two hinges, one 0.50 m from the top and the other 0.50 m
from the bottom. Each hinge supports half the total weight of the door.
Assuming that the door’s center of gravity is at its center, find the horizontal
components of force exerted on the door by each hinge.

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

A diver stands on a diving board with a length of 4.5 m. The diving board is supported by two pedestals which are 1.5 m apart. If the diver's weight is 590, determine the force exerted on the left pedestal by the board. Use positive = up for a sign convention and ignore the weight of the diving board.
The drawing shows a uniform horizontal beam attached to a vertical wall by a frictionless hinge and supported from below at an angle 0 = 44° by a brace that is attached to a pin. The beam has a weight of 340 N. Three additional forces keep the beam in equilibrium. The brace applies a force P to the right end of the beam that is directed upward at the angle e with respect to the horizontal. The hinge applies a force to the left end of the beam that has a horizontal component H and a vertical component V. Find the magnitudes of these three forces. Вeam Hinge Pin Brace (a) V = i (b) P = i (c) H = i > > >
A 1140-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the magnitudes of the (b) horizontal and (c) vertical components of the force that the wall exerts on the left end of the beam. 50.0° 30.0% Beam 1960 N
The drawing shows a uniform horizontal beam attached to a vertical wall by a frictionless hinge and supported from below at an angle θ = 35o by a brace that is attached to a pin. The beam has a weight of 342 N. Three additional forces keep the beam in equilibrium. The brace applies a force P¯ to the right end of the beam that is directed upward at the angle θ with respect to the horizontal. The hinge applies a force to the left end of the beam that has a horizontal component H¯ and a vertical component V¯. Find the magnitudes of these three forces.
In the figure, one end of a uniform beam of weight 280 N is hinged to a wall; the other end is supported by a wire that makes angles θ = 28° with both wall and beam. Find (a) the tension in the wire and the (b) horizontal and (c) vertical components of the force of the hinge on the beam.
A uniform rod is attached to a wall by a hinge at its base. The rod has a mass of 8.5 kg, a length of 1.8 m, is at an angle of 21° above the horizontal, and is held in place by a horizontal cord attached to the other end of the rod and bolted to the wall above the base of the rod. (a) Determine the tension in the cord. (b) Determine the horizontal and vertical components of the force exerted on the rod by the hinge. FH %3D Fv = %3D