A dc generator consists of 100 wires connected in seri and lying in a radius of 10 cm. the effective length of each conductor is 15 cm. The radial field has a strengtl of 0.8 T. If the armature rotates at 1,200 rpm, solve the voltage generated. Draw the diagram. Thanks

The armature of a two-pole generator is rotating at 3600 r/min. The armature has a simplex lap winding with a total of 1504 conductors. Determine the generated voltage when the flux per pole is 600,000 x 10-8 Wb. 5.5

The current generated by the waterwheel generator changes direction as the wheel rotates, that is, it is an alternating current.  Could you design a simple generator like this that would induce a current that continuously flowed in one direction (a DC current)?  If not, explain why not.  If so, describe and sketch your model solution below.

please solve quickly step by step please sir

× 4:03 K s.eng.ruh.ac.lk □ Û 8. Figure 4 shows the core of a simple dc motor. The magnetization curve for the metal in this core is given by Figure 5 and Figure 6. Assume that the cross-sectional area of each air gap is 18 cm² and that the width of each air gap is 0.05 cm. The effective diameter of the rotor core is 4 cm. L It is desired to build a machine with as great a flux density as possible while avoiding excessive saturation in the core. What would be a reasonable maximum flux density for this core? ii. What would be the total flux in the core at the flux density of part (i)? iii. The maximum possible field current for this machine is I A. Select a reasonable number of turns of wire to provide the desired flux density while not exceeding the maximum available current. Flux Density, B (T) 2.8 སྤྲ ཤཱ ཀ ཀཱ བྷ ཀ ཡཱཾ བ ་ 1.2 1.0 0.4 0.2 4-48cm Figure 4 0 10 20 30 40 50 100 → Depth 4 cm -0.05 cm 200 300 500 1000 2000 Magnetizing Intensity, H (A.turns/m) Figure 5 Magnetization curve…