A cylindrical specimen of some metal alloy 7.7 mm in diameter is stressed in tension. A force of 6280 N produces an elastic reduction in specimen diameter of 0.0033 mm. Calculate the elastic modulus (in GPa) of this material if its Poisson's ratio is 0.35. GPa

A cylindrical specimen of some metal alloy 7.7 mm in diameter is stressed in tension. A force of 6280 N produces an elastic reduction in specimen diameter of 0.0033 mm. Calculate the elastic modulus (in GPa) of this material if its Poisson's ratio is 0.35. GPa

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: 8.22 Consider the brass alloy for which the stress-strain behavior is shown in Figure 8.12. A…

Q: A steel rod is subjected to a stress of 200 MPa and has Young's modulus of 200 GPa. Calculate…

Q: A specimen of some metal having a rectangular cross section 9.74 mm x 13.5 mm is pulled in tension…

A: Cross section - 9.74 mm * 13.5 mmForce - 796 NElastic modulus - 79 GPACalculate the resulting strain

Q: Q3/ A specimen having a rectangular cross section 0.000721mm2 is pulled in tension with 55,500 N…

A: A=0.000721 mm2T=55500Nyoung;s modulus (E)=70GPa∑=70*109Pa=70*103MPa=70*103 N/mm2

Q: A load of 20 kN is applied to a rod with a diameter of 12.5 mm. Calculate the strain in the rod if…

A: Given Data: The load applied, P=20 kN Diameter of the rod, d=12.5 mm Young's modulus, E=103 GPa

Q: 1. Consider a cylindrical specimen of some hypothetical metal alloy that has a diameter of 12.0 mm.…

Q: When a tensile force of 0.6 kN is applied to an elastic element, it has an elongation of 3 mm. What…

Q: The is a rope that just cannot stretch more than 0.6 cm from a tensile force of 500N without…

A: Given: Tensile force applied on the rope, T=500 N mass of the rope, m=0.5 kg length of the rope,…

Q: 100 mm x 100 mm x 100 mm cube made with glass polymers in the y- direction is subjected to a tensile…

Q: ongitudinal strain for a wire is 0.03 and isson's ratio is 0.5, then its lateral strain 0.003 75ח ת…

A: Option (3) is correct. Lateral strain = 0.015

Q: What is the modulus of elasticity

A: force F = 613 kNdiameter d = 43 mm = 0.043 mlength L = 304 mm = 0.304 melongate length l = 0.00224 m

Q: A tensile specimen of cylindrical brass cartridge subjected to a load of 150 kg has a cross section…

Q: A torsion test shows that the shear modulus of an aluminum specimen is 4.60 x 10^6 psi. When the…

A: Material elastic properties E is modulus of elasticity G is modulus of rigidity K is Bulk Modulus…

Q: A bar of 80 mm diameter is tested in tension. It is observed that when a load of 90 kN is applied,…

A: The given data are: Here, d denotes the diameter, P denotes the load, and L denotes the length.

Q: Example 2. A cylindrical bar of 40 mm diameter and 1 m length is subjected to a tensile test. Its…

A: A cylindrical bar-Diameter d=40 mmLength L=1 mLongitudinal strain is 6 times lateral strainModulus…

Q: A rod is subjected to an uniaxial load within linear elastic limit. When the change in the stress is…

A: The change in stress, .The change in strain, .The Poisson ratio, .Write the expression to calculate…

Q: A steel bar 100 mm long and having a square cross section 20 mm on an edge is pulled in tension with…

Q: Take longitudinal strain 0.02

A: Given data : Longitudinal strain εL=0.02 Poisson's ratio μ=0.5 To find : Lateral strain

Q: A tensile force of 200 KN is applied on a 0.02-m diameter and.2-m long rod. After applying the load,…

Q: You are given a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m). The…

Q: Compare the strain energies of two bars of the same material and length and carrying the same…

Q: If a material had a modulus of elasticity of 2.1 × 106 kgf/cm² and a modulus of rigidity of 0.8 ×…

Q: A cylindrical material that has a Young’s Modulus of 2.5 GPa that is loaded along its longitudinal…

Q: A tube has 25mm outside diameter and an axial tensile load of 40 kN. If the strain on the tube is…

Q: consider a cylindrical nickle wire 1.9 mm in diameter and 3.0*104 mm long. calculate its elongation…

Q: When a tensile load of 20kN is applied to a rod of length 5 cm, the strain is 0.05. The change in…

Q: A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 200 mm.…

A: since you haven't mentioned the value of poison ration and elastic modulus that's why the reference…

Q: A 35 kN axial load is applied to a metal bar with a rectangular cross-section, 28mm wide by 10mm…

A: To find: The original length of the bar. Given: The load is P=35 kN. The width is 28 mm and…

Q: n of aluminum having a rectangular cross section 9.6 mm × 13.0 mm (0.3780 in. × 0.5118 in.) is…

A: Given:Area, A=9.6*13.0 mm2F=35800 NE=69 GPa

Q: Calculate the modulus of resilience (in MPa) of a material if it has a yield stress of 500 MPa and a…

Q: A composite bar is subjected to a tensile load of 115 kN. Bar 1 is rectangular cross section with…

Q: A steel rod, 2 m long and 20 mm × 20 mm in cross section, is subjected to a tensile force of 40 kN.…

A: Given, Length of the rod = L = 2 m = 2000 mm Cross sectional area = A = 20 mm x 20 mm = 400 mm2…

Concept explainers

Thermal Properties of Materials

In mechanical engineering, the thermal property is represented as the physical quantity that is relevant to the application of heat. The thermal properties are evaluated by variations in any specific material due to low heat or high heat. The quantities that influence the thermal property of the materials are mass, density, temperature, and many others.

Question

A cylindrical specimen of some metal alloy 7.7 mm in diameter is stressed in tension. A force of 6280 N produces an elastic reduction
in specimen diameter of 0.0033 mm. Calculate the elastic modulus (in GPa) of this material if its Poisson's ratio is 0.35.
i
GPa

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Types of Properties of Engineering Materials

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A metal bar 5.0 m long extends by 0.05 mm when a tensile load is applied to it. The percentage strain is:
A tensile load of 1700 N is applied to a cylindrical specimen of a metallic 1) alloy. The initial diameter of the specimen is 12.0 mm and the elastic reduction of the diameter due to the load is 7.1 x 104 mm. If the Poisson's ratio of the allow is 0.37, determine the elastic modulus of the alloy.
A bar produces a lateral strain of magnitude 60x105 m/m when subjected to a tensile stress of magnitude 300 MPa along the axial direction. What is the elastic modulus of the material if the Poisson's ratio is 0.3?
The cable of hoist has a cross sectional of 80mm2.The hoist is used to lift a crate weighining 500 kg.The free length of of the cable is 30 m.Assume all deformation is elastic. (a) what is the stress on the cable. (b) How much will the cable extend if it is made from steel(E-200 Gpa)? (c) How much will the cable extend if it is made from polypropylene(E-1.2 Gpa)?
A sample of silicone breast implant, polydimethylsiloxane (PDMS), is placed under unconfined compression. The magnitudes of the resulting longitudinal and transverse strains have been measured to be 2.7 and 1.341, respectively. The young's modulus of the implant is 500 kPa. Calculate the shear and bulk moduli.
At the proportional limit, a 16 mm thick x 69 mm wide bar elongates 6.2 mm under an axial load of 485 kN. The bar is 1.5 m long. If Poisson's ratio is 0.32 for the material, determine the modulus of elasticity (in GPa). Note: Do not include units in your answer. Answer:
The Young's modulus of a material is 125 GPa and Poisson's ratio is 0.25. The modulus of rigidity of the material is
A metal bar 5.0 m long extends by 0.05 m when a load is applied to it. The strain is?
A rod is 0.5 m long and 5 mm diameter. It is stretched 0.06 mm by force of 3 kN. Calculate stress and strain (Answer: 152.8 MPa and 120 uε)
The yield stress for mild steel is 207MP.. A specimen with diameter of 0.01lm and length of 0.1m is subjected to a load of weight of 10kg, and the resulting elongation is 6.077 microns. Determine whether the stress is above or below the yield stress, and if it is below, compute the Young's modulus of the material.