,A cylindrical disk of wood weighing 50.0 [N] and having a diameter of 25. 0 [cm] floats on a liquid of density p = 0.750 [g/cm³). The cylinder of liquid is 60.0 [cm] high and has a diameter that is the same as that of the wood. What is the gauge pressure halfway down the liquid? A. For your science exhibit, you want to make a block of wood float at the Oil interface between a layer of oil of unknown density Pl and water (Pwater = 1000 [kg/m³) inside a container as shown. The density of the wood is Pwood 800 [kg/m). What must be the density of the oil so that only 30. 0% of the wood is submerged in water? wood water C. right. The radii of the pipe at points 1 and 2 are 0.500 [m] and 1. 50 [m] respectively. The volume flow rate through the pipeline is 2.50 [L/s] If the pressure at point 1 in the pipe is 200 [kPa], what is the pressure at point 2, located 5.00 [m] above point 1? Water is flowing through a pipeline shown on the 2 5.00 (m) B.

,A cylindrical disk of wood weighing 50.0 [N] and having a diameter of 25. 0 [cm] floats on a liquid of density p = 0.750 [g/cm³). The cylinder of liquid is 60.0 [cm] high and has a diameter that is the same as that of the wood. What is the gauge pressure halfway down the liquid? A. For your science exhibit, you want to make a block of wood float at the Oil interface between a layer of oil of unknown density Pl and water (Pwater = 1000 [kg/m³) inside a container as shown. The density of the wood is Pwood 800 [kg/m). What must be the density of the oil so that only 30. 0% of the wood is submerged in water? wood water C. right. The radii of the pipe at points 1 and 2 are 0.500 [m] and 1. 50 [m] respectively. The volume flow rate through the pipeline is 2.50 [L/s] If the pressure at point 1 in the pipe is 200 [kPa], what is the pressure at point 2, located 5.00 [m] above point 1? Water is flowing through a pipeline shown on the 2 5.00 (m) B.

Name: ,A cylindrical disk of wood weighing 50. 0 [N] and having a diameter
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: ,A cylindrical disk of wood weighing 50. 0 [N] and having a diameter of 25. 0 [cm] floats on aА.liquid of density p = 0.750 [g/cm³]. The cylinder of liquid is 60.0 [cm] high and has a diameter that isthe same as that of the wood. What is the gauge p

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Related questions

Q: Suppose the air outside the window moves with a speed of approximately 160 m/sm/s shortly after…

Q: A child fills up a water gun with water from a pool. She holds the gun just completely submerged at…

Q: Tank 1 has a fluid of density ρ filling it to a height h and is located on a planet with gravity g.…

A: We know that the formula of the gauge pressure at the bottom of the tank is given as Gauge…

Q: a pipe with cross-sectional area 2m^2 runs horizontally across a platform at a height of 4 m. It…

A: a) Let's use the continuity equation to find the speed of the water in the second pipe.…

Q: as an inner diameter of 4.0 mm, a needle inner diameter of 0.23 mm. and a plunger pad diameter…

Q: 1000kg/m is flowing through a pipe that has an area of 0.5m2 with a velocity of 1 m/s at position A.…

Q: Fluid A has a density of 3 g/cm3 and Fluid B has a density of 4 g/cm3. Fluid A is in a filled tank…

Q: 1. Suppose a person is 182 cm tall. A typical blood pressure is often given as 110/70 mm Hg, with a…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Q: As a woman walks, her entire weight is momentarily placed on one heel of her high-heeled shoes. This…

A: The objective of this question is to calculate the pressure exerted on the floor by the heel of a…

Q: Find the minimum diameter of a (50 m)-long nylon string that will stretch no more than (1 cm) when a…

A: We are allowed to give the explanation of first question only which is given below. Please repost…

Q: An object weighing 343 N in air is fully immersed in water after being tied to a string that is hung…

A: Giveen Weight of object in air is 343N Weight in water is 214N Weight in oil is 270 N And volume is…

Q: A manometer with two closed ends contain some gases inside. The pressure inside the bulb A is PA =…

A: Hello. Since your question has multiple sub-parts, we will solve the first three sub-parts for you.…

Q: a. The barometer is a device to measure atmospheric pressure. If you plan to make a barometer by…

A: (a) A barometer is a scientific instrument used to measure atmospheric pressure. It consists of a…

Q: A rock with a mass of 580 g in air is found to have an apparent mass of 365 g when submerged in…

Q: An otter is swimming in the deep area of his tank at the zoo. The surface area of the otter's back…

A: Surface Area of Otter's back, Gauge Pressure of the…

Q: A small blood vessel near the skin surface has a radius of 10 µm, a length of 1 µm and the pressure…

Q: A U-shaped tube is filled mostly with water, but some vegetable oil has been added to both sides of…

A: The pressure at both sides of the tube is equal.…

Q: The picture shows a section of pipe within a closed system (not open at the ends). Water (density…

Q: Nail tips exert tremendous pressures when they are hit by hammers because they exert a large force…

Q: Q2. A "U" shaped tube (with a constant radius) is filled with water and oil as shown. The water is a…

A: Solution: Given: The experimental arrangement is shown in figure that consist of a U tube in which…

Q: A garden hose is attached to a water faucet on on end and a spray nozzle on the other end. The wat…

A: Solution

Q: Motor oil, with a viscosity of 0.25 N.s/m2, is flowing through a tube that has a radius of 4.0 mm…

Q: An Olympic swimming pool is 50 m long, 25 m wide, and 2 m deep. (a) Make a plot of pressure as a…

Q: onsider the pressure on a shot putter's hand as he throws the heavy shot. a. Calculate the average…

Q: Blood pressure is measured when the blood is pumping (systolic) and when the heart is resting…

A: Density of mercurry Systolic height of the mercurry is Diastolic height of the mercurrry is

Q: Constants A 5.8 cm diameter horizontal pipe gradually narrows to 4.1 cm . When water flows through…

A: The initial diameter of the pipe, D1 = 5.8 cm Therefore, the initial radius of the pipe is, r1 = D12…

Q: An object that is 1 meter under water, experiences a pressure of 10 kg*m/s2. What is the density of…

A: depth at which an object is placed (h) = 1 m Pressure (P) = 10 kgms2

Q: In a lab, a foot-long test tube contains gasoline (density equal to 748.9 kg/m³) and oil (density…

A: Given value---height of test tube = 1 ft =0.3048 mdensity of gasoline = 748.9 kg/m3. density of oil…

Concept explainers

Fluid Pressure

The term fluid pressure is coined as, the measurement of the force per unit area of a given surface of a closed container. It is a branch of physics that helps to study the properties of fluid under various conditions of force.

Gauge Pressure

Pressure is the physical force acting per unit area on a body; the applied force is perpendicular to the surface of the object per unit area. The air around us at sea level exerts a pressure (atmospheric pressure) of about 14.7 psi but this doesn’t seem to bother anyone as the bodily fluids are constantly pushing outwards with the same force but if one swims down into the ocean a few feet below the surface one can notice the difference, there is increased pressure on the eardrum, this is due to an increase in hydrostatic pressure.

Topic Video

Question

,A cylindrical disk of wood weighing 50. 0 [N] and having a diameter of 25. 0 [cm] floats on a
А.
liquid of density p = 0.750 [g/cm³]. The cylinder of liquid is 60.0 [cm] high and has a diameter that is
the same as that of the wood. What is the gauge pressure halfway down the liquid?
В.
For your science exhibit, you want to make a block of wood float at the
Oil
interface between a layer of oil of unknown density Pai, and water (Pwater
1000 [kg/m³) inside a container as shown. The density of the wood is Pwood
800 (kg/m³). What must be the density of the oil so that only 30. 0% of the wood is
submerged in water?
wood
water
C.
right. The radii of the pipe at points 1 and 2 are 0.500 [m] and
1. 50 [m), respectively. The volume flow rate through the
pipeline is 2.50 [L/s]. If the pressure at point 1 in the pipe is
200 [kPa], what is the pressure at point 2, located 5. 00 [m]
above point 1?
Water is flowing through a pipeline shown on the
2
5.00 [m]
1

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step by step

Solved in 5 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

In a lab, a foot-long test tube contains gasoline (density equal to 748.9 kg/m³) and oil (density equal to 950 kg/m3). The gasoline occupies the upper half of the tube while the oil occupies the lower half of the test tube. Compute for the pressure at the middle of the tube (at the interface between oil and gasoline). A: 1950.2 N/m^2B: 1118.5 N/m^2C: 890.4 N/m^2D: 2537.3 N/m^2E: none of the above
Pressure cookers have been around for more than 300 years, although their use has strongly declined in recent years (early models had a nasty habit of exploding). How much force (in N) must the latches holding the lid onto a pressure cooker be able to withstand if the circular lid is 23.0 cm in diameter and the gauge pressure inside is 3.50 atm? Neglect the weight of the lid. N
Pressure cookers use water at very high pressures to cook food very quickly. They have been around for more than 300 years, although their use has strongly declined in recent years (early models had a nasty habit of exploding). a. How much force, in newtons, must the latches holding the lid onto a pressure cooker be able to withstand if the circular lid is 27.5 cm in diameter and the gauge pressure inside is 0.95 atm? Neglect the weight of the lid.
An airplane is pressurized with air to 650 mmHg. a. If air is 21% oxygen, what is the partial pressure of oxygen on the plane? b. If the partial pressure of oxygen drops below 100 mmHg, passengers become drowsy. If this happens, oxygen masks are released. What is the total cabin pressure at which oxygen masks are dropped?
A very deep point of the Pacific Ocean is at a depth of 10,100 m below the surface. What is the gauge pressure in the water at that point? The density of seawater is 1025 kg/m3. Ignore the slight variations of g and ρ with depth. Assume g = 9.80m/s2. Assume 3 significant digits. A. 8.88 ×107 Pa B. 2.22 ×108 Pa C. 1.11 ×108 Pa D. 1.01 x108 Pa E. 3.33 ×108 Pa F. 5.55 ×107 Pa
You have three objects of varying shapes and sizes: Object 1 is a rectangular block of tin. Object 2 is a cube of aluminum. Object 3 is a sphere of copper. a. the density of tin is 5.75g/cm2. What is the mass of object 1 in kg if the rectangular block has a volume of 1.34L? b. what is the volume in cubic inches of object 2 if the cube of aluminum 7.58 inches on a side? c. what is the mass in kg of object 2? the density of aluminum is 2.70g/cm3 d. what is the volume in cm3 of object 3 if the sphere of copper has a diameter 8.62cm? the volume of the sphere is 4 {pi}^3/3 e. what is the mass in kg of object 3? Copper has a density of 8.96g/cm3
Pressure cookers have been around for more than 300 years, although their use has strongly declined in recent years (early models had a nasty habit of exploding). How much force (in N) must the latches holding the lid onto a pressure cooker be able to withstand if the circular lid is 21.0 cm in diameter and the gauge pressure inside is 2.60 atm? Neglect the weight of the lid. N
1. Suppose a person is 182 cm tall. A typical blood pressure is often given as 110/70 mm Hg, with a mean pressure of 80 mm Hg. A. Do you think this is the gauge pressure or absolute pressure? Why? If the pressure at the top of the head is about 39 mm Hg, how far away is this person's head from the heart? Assume the density of blood is about 6% higher than that of water. t, What then would be the blood pressure.of this 6, person at their feet? b. Suppose this person suffers a puncture wound around the same height as the heart where the opening is about 3 mm in diameter. How far could blood shoot from their body assuming it comes out horizontally with 0 m/s initial horizontal velocity? %3D = 0.754 Since horizontal velocity is zero it will not go eny for than body Please explain the variábles used in the equation to solve for F= P.A in partad of this question. Comment > Thank yo!!
B
A raft has dimensions 7.0 m x 7.0 m with a thickness of 1.0 m and made of material with average density 650 kg/m3. a. When floating in water, what percentage of the volume is under water? b. What is the pressure underneath the raft? c. How heavy of a load is necessary to cause the raft to be 80% submerged in water? d. If the raft is made with a different material of lower density and 80% of it is still submerged, how if at all would your answers to (a), (b) and (c) change? e. , explain how, if at all, the answer to (b) is related to the buoyant force. f. Imagine that the load increases enough to fully submerge and then sinks the raft to the bottom of the lake. How, if at all, does the buoyant force vary during this process?
Ethanol is flowing in a pipe and at all points completely fills the pipe. At point A in the pipe the gauge pressure is p and the cross-sectional area of the pipe is 0.0500 m² . The other end of the pipe (point B) is open to the air, has cross-sectional area 0.0120 m2, and is at a vertical height of 9.00 m above point A. Part A What must the gauge pressure p be at A if the volume flow rate out of the pipe at point B is 0.0800 m /s? Express your answer with the appropriate units. HA ? x" X•10" p = 1.87 • 10$ Pa This unit is not recognized. See the list of acceptable units. No credit lost. Try again. Submit Previous Answers Request Answer Provide Feedback MacBook Air