A customer is using 10G SONET link to connect branch offices. The signals are multiplexed and de-multiplexed in STS-1 format. The customer wants to find how many STS1s are carried in the 10G link at a time. A. 48 B. 192 C. 12 D. 8

A customer is using 10G SONET link to connect branch offices. The signals are multiplexed and de-multiplexed in STS-1 format. The customer wants to find how many STS1s are carried in the 10G link at a time. A. 48 B. 192 C. 12 D. 8

Systems Architecture

7th Edition

ISBN:9781305080195

Author:Stephen D. Burd

Publisher:Stephen D. Burd

Chapter8: Data And Network Communication Technology

Section: Chapter Questions

Problem 6RQ

See similar textbooks

Related questions

Q: For a binary transmission link, the uncoded E/No ratio is 9 dB and matched filtering with polar…

A: Given Eb/N0 = 9db Eb/N0 is the SNR in db SNR(db) = 9 10*log10(SNR)=9 SNR = 7.943

Q: The multiplexing concept requires: Select one: A. Of a link and a channel b. One link and…

A: To Achieve Multiplexing a device is needed which is called Multiplexer.Let's talk about it first.…

Q: the difference between QPSK and offset QPSK? 2) Five channels, each with a l00 kHz bandwidth, are to…

A: 1. the difference between QPSK and offset QPSK 2.Five channels, each with a l00 kHz bandwidth, are…

Q: Design a channel coding scheme to detect two or less errors for the m source (00, 10, 01, 11). Can…

A: Designing a channel coding scheme to detect two or fewer errors for the given message source while…

Q: Four channels, each with a 150-kHz bandwidth, are to be multiplexed together. What is the minimum…

A: Bandwidth is a range of frequencies that a system can transmit data. It is measured in Hertz unit.

Q: Multiplexing is done with TDM, FDM, and CDM on the physical layer. What are the pros and cons of…

A: Multiplexing is a technique used to transmit multiple signals over a single communication channel.…

Q: List out any four teatures of TDMA.

Q: Five Channels each with a 100 KHz bandwidth are to be multiplexed together using Frequncy division…

A: Answer is. The minimum bandwidth is 540 Khz.

Q: Your company has a video transcoder. Each network interface returns the number of transmitted and…

A: Answer is given below-

Q: Eight channels, each with a 4 KHz bandwidth are to be multiplexed together. What is the minimum…

Q: As a Network Engineer, assume that you are given 9 input-lines that carry digital inputs, and the…

A: Given: As a Network Engineer, assume that you are given 9 input-lines that carry digital inputs, and…

Q: if you are given alow-pass channel that ends at 40MHz and you knew that the SNR for this channel is…

A: maximum capacity of channel= c= B. log2 (1+SNR) Nyquist channel capacity =2 B log ( M) where M=…

Q: channels, each with a l00 kHz bandwidth, are to be multiplexed together. What is the minimum…

A: It is defined as the maximum data transfer rate of a network or Internet connection. It measures how…

Q: Line coding is done at the data link layer

A: We are asked a true false question on Line coding and whether it is done at data link layer or not.…

Q: Consider an OFDM system in which 1000 subcarriers are each to be modulated at 1000 bits per second.…

A: OFDM system in which 1000 subcontractor modulations are per second at 1000 bits. (A) The…

Q: system with 192 subcarriers. The duration of the OFDM symbol including the cyclic prefix is 11.8 µs.…

A: lets see the solution.

Q: The Arduino Uno has a 10-bit ADC. What is the value of val’ in the following cases? ) val =…

A: As per our company guidelines we are supposed to answer ?️only first 3️⃣ sub-parts. Kindly repost…

Q: to transmit100 digitizedvoice channels using a pass-bandchannel of 20 kHz.What should be the ratio…

A: the solution is an given below :

Q: How does signal attenuation differ between coaxial cables and twisted-pair cables over extended…

A: Signal attenuation is a significant consideration in data transmission over extended distances.…

Q: In the WiFi 802.11g network, each OFDM symbol spreads out over 48 subcarriers with a 64 QAM…

A: QUESTION A The time per OFDM symbol is 3/4 * 48 / 54 = 1.08 seconds. QUESTION B 48 subcarriers…

Q: I symbol rate across all subcarriers is 4000 symbols per second. Assume that in the Triers use…

A: the solution is an given below :

Q: In an FDMA-based multiple access system, each user is assigned an 80 kHz channel for full-duplex…

A: Answer : correct option is 'E'

Q: A corporation has a medium with a 7 MHz bandwidth (lowpass). The corporation needs to create 9…

A: he baud is defined as the number of changes in the signal level with in a second. The bandwidth of…

Q: Four channels are multiplexed using TDM. If each channel sends 100 bytes /s and we multiplex 5 bits…

A: i. The multiplexer is shown in the figure. Show the frame (at least three) traveling on the link…

Q: Sketch the Bipolar NRZ Voltage encoding on a classic Ethernet for the bit stream 0001110101.

A: Digital data to Digital data NRZ( Non return to Zero) NRZ code has ! for high voltage level and 0…

Q: FDM system user to combine 9 tones on a single carrier four of these tones are each 2.5 kHz and…

Q: A) Explain about Multiplexing and Demultiplexing and types of Multiplexing.

A: Actually, given question regarding Multiplexing and de multiplexing.

Q: Consider TDM-based circuit switching with 8000 frames per second and 32 time slots per frame. During…

A: The above question is solved in step 2 :-

Q: We have a channel with a 1-MHz bandwidth. The SNR for this channel is 63. What are the appropriate…

A: given data 1 MHz bandwidth SNR channel 63 find bit rate and signal level? Solution C = B log…

Q: We would like to transmit information over a CAT-6 twisted pair cable with a bandwidth of 250 MHz.…

A: In communication systems, channel capacity is the maximum amount of information that can be reliably…

Q: What is the purpose of error and flow control in synchronous time-division multiplexing, and how is…

A: Data Link: Explain how the physical layer and data link control manage error and flow control in…

Question

A. 48
B. 192
C. 12
D. 8

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, computer-science and related others by exploring similar questions and additional content below.

Similar questions

Five Channels each with a 100 KHz bandwidth are to be multiplexed together using Frequncy division multiplexing(FDM) scheme.What is the minimum bandwidth of the link if there is a need for a guard band of 10 Khz between the channel to prevent interference?
Four channels are multiplexed using TDM. If each channel sends 100 bytes /s and wemultiplex 5 bits per channel.i. Show the frame (at least three) traveling on the link with arbitrary dataii. The size of the frame
FDM system user to combine 9 tones on a single carrier four of these tones are each 2.5 kHz and modulated SSB on sub-carrier with guard band of 200 Hz. The other is each at 4.2 kHz and are modulated FM on sub-carrier with modulation index of 5 with guard band of 300 Hz. The base band signal is frequency modulated on main carrier with modulation index of 10. calculate the transmission bandwidth of the FDM signal. Assuming 400 Hz as a guard band between SSB and FM sub- .carrier BW=6.812 MHz O BW=9.812 MHZ O BW=7.812 MHZ O BW-5.812 MHz O BW=8.812 MHz O
Consider TDM-based circuit switching with 8000 frames per second and 32 time slots per frame. During each time slot 8 bits are sent. What is the total transmission rate of the whole link in kbps?
For a binary transmission link, the uncoded E/No ratio is 9 dB and matched filtering with polar transmission is used. The bit error rate is -6 3.7×10 3.3x10 2.5×10 3.92x10
Four channels, each with a 150-kHz bandwidth, are to be multiplexed together. What is the minimum bandwidth of the link If there is a need for a guard band of 10 kHz between the channels to prevent interference?
if you are given alow-pass channel that ends at 40MHz and you knew that the SNR for this channel is 255, then the maximum number of signal levels to be used over this particular channel equal?
List out any four teatures of TDMA.
As a Network Engineer, assume that you are given 9 input-lines that carry digital inputs, and the rates of these 9 lines are as follows: • 5 lines with a data rate of 600Bps (each), • 2 lines with a data rate of 200Bps (each), • 2 lines with a data rate of 100Bps (each). Now, to multiplex such digital input lines using an efficient synchronous multiplexing scheme with no synchronization bits, if 96 bits are multiplexed at a time, find the following: (1) The link data rate equals bps. Note: Please add your answer using numbers ONLY with NO spaces, using 3 digits of accuracy when needed.
QS: Draw phase change with time for GMSK modulator transmitting the data stream 1110100100011 Assume the data rate is 1 kKbps and maximum phase change per bit is 7/2.
A corporation has a medium with a 7 MHz bandwidth (lowpass). The corporation needs to create 9 separate independent channels each capable of sending at least 12 Mbps. The company has decided to use QAM technology. What is the minimum number of bits per baud for each channel? What is the number of points in the constellation diagram for each channel? Let d = 0
Consider an OFDM system with 192 subcarriers. The duration of the OFDM symbol including the cyclic prefix is 11.8 µs. Find the data rate, if the code rate is 1/2 and BPSK is used?