Answered: A copper wire 4 m long has diameter of… | bartleby

Related questions

Question

100%

A copper wire 4 m long has diameter of 1
mm, if a load of 10 kg. wt is attached at other
end. What extension is produced, if Passion's
ratio is 0.26 ? What is lateral compression
produced in it? Yu= 12.5 × 1010 N/m².
%3D

Expert Solution

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

1. A steel beam is placed vertically in the basement of a building to keep the floor above from sagging. The load on the beam is 6.0*104 N, the length of the beam is 2.7 m, and the cross-sectional area of the beam is 7.3*10-3 m2. Find the vertical compression of the beam. The young’s modulus of steel is 200 *109 Pa.
3. A brass rod with a length of 1.40 m and a cross. sectional area of 2.00 square cm is fastened end to end to a nickel rod with length L and cross- sectional area 1.00 square cm. The compound rod is subjected to equal and opposite pulls of magnitude at its ends. 4.00 x104 N (a) Find the length L of the nickel rod if the elongations of the two rods are equal. (b) What is the stress in each rod? (c) What is the strain in each rod?
4. A single axial load of P = 60 kN is attached at the end C of the brass rod ABC. Knowing that E = 105 GPa, determine the diameter d of the portion BC for which the deflection of point C will be 3 mm. 30 mm d 1.2 m B P 10.8 m
1 iron 40 cm steel 70 cm Henry has a rod that is made out of 2 parts. An iron and steel section. The iron section is 40cm long (Y₁=9.1 x 10¹⁰ N/m²). The iron piece is attached to a steel piece that is 70 cm long (Y,=7.0 x 10¹0⁰ N/m²). The rod has a uniform cross sectional diameter of 3.40 cm. Determine the total compression (in mm)when henry uses a compressive force on the rod of magnitude F=6000N. Look at the image provided to get a better understanding.
A Water Tank That Needs Cleaning 11 of 18 I Review I Consta A cylindrical open tank needs cleaning. The tank is filled with water to a height ho = 1.00 meter, so you decide to empty it by letting the water flow steadily from an opening at the side of the tank, located near the bottom. The cross-sectional area of the tank is Aj = 0.785 square meters, while that of the opening is A2 = 0.002 square meters. Part A %3D How much time t/2 does it take to empty half the tank? (Note: A useful antiderivative is 1/2 da = 2x/2) Express your answer numerically in seconds. Take the free-fall acceleration due to gravity to be g = 9.81 meters per second per second. %3D • View Available Hint(s) ? t1/2 = Submit Nex Provide Feedback MacBook Air DII DD 000 esc F9 F10 FL F4 F5 F6 F7 FB F2 F3 F1 * @ %23 %24 3 5 8 9 * 00
19. A force of 5000N is applied outwardly to each end of a 5.0-m long rod with a radius of 34.0 cm and a Young's modulus of 1.25 x 10°8 N/m^2. The elongation of the rod is: * A. 0.0020mm B. 0.0040mm C. 0.14mm D. 0.55mm O E. 1.42mm
4. A two-dimensional source at the origin has a strength (3Tt/2) m2 s'. If the density of the fluid is 800 kg ·m³, calculate the velocity, the piezometric pressure gradient, and the acceleration at the point (1.5 m, 2 m).
Q5. The steel wire working a signal is 750 m long and 0.5 cm diameter. Assuming a pull on the wire of 1.5 kN, find the movement which must be given to the signal-box end of the wire if the movement at the signal end is to be 17.5 cm. Take Young's modulus as 200 GN/m² T1
Please answer and solve the question correctly. Thank you!!
A string has a diameter of 1cm and original length of 200 cm. the string is pulled by aforce 2kN. Determine the change in length of the string given that the young’s modulusof string is 7.5GPa