A compound shaft drives three gears. Segments (1) and (2) of the compound shaft are hollow aluminum [G = 2860 ksi] tubes, which have an outside diameter of 2.75 in. and a wall thickness of 0.28 in. Segments (3) and (4) are solid 2.14-in.-diameter steel [G=8000 ksi] shafts. Assume that L₁=60 in., L₂=4 in., L3=13 in., L4-12 in, Tg-36 kip-in., Tp-45 kip-in., and TE-17 kip-in. The bearings shown allow the shaft to turn freely. (a) Determine the maximum magnitude of the shear stress Tmax in the compound shaft. (b) Determine the rotation angle (c) Determine the rotation angle CIA of flange Ćwith respect to flange A. of gear E with respect to flange A.

A compound shaft drives three gears. Segments (1) and (2) of the compound shaft are hollow aluminum [G = 2860 ksi] tubes, which have an outside diameter of 2.75 in. and a wall thickness of 0.28 in. Segments (3) and (4) are solid 2.14-in.-diameter steel [G=8000 ksi] shafts. Assume that L₁=60 in., L₂=4 in., L3=13 in., L4-12 in, Tg-36 kip-in., Tp-45 kip-in., and TE-17 kip-in. The bearings shown allow the shaft to turn freely. (a) Determine the maximum magnitude of the shear stress Tmax in the compound shaft. (b) Determine the rotation angle (c) Determine the rotation angle CIA of flange Ćwith respect to flange A. of gear E with respect to flange A.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: The figure below shows the power transmitted through a gear drive to multiple output shafts. Gear A…

Q: In Figure Q2, gear 2 rotates at 1400 r.p.m. clockwise, determine the rotation speed of gear 7 and…

A: Given Data Speed of gear 2 is : N2=1400 rpm Module of gear is : m=6 mm Pressure angle is :ϕ=20°…

Q: Two parallel shaft connected by spur gears turn in the same direction and having a speed ratio of SR…

Q: C) : A compound gear train shown in figure consists of a driver gear A engaging with gear B.…

Q: Q.7 A pair of parallel helical gears consists of a 20 teeth pinion mashing with a 40 teeth gear. The…

Q: Determine the minimum shaft diameter at locations A, B, C, D, & E for an enclosed industrial…

Q: d-150 mm d,-300 mm 4,4 kN 4 B 150 mm KSAN 300 mm 300 mm

A: When an external force is applied to an object and when that force tends to bend the object is…

Q: A gear train is composed of four helical gears with the three shaft axes in a single plane, as shown…

Q: Calculate the angle of twist at point A. A for the following diagrammed problem. There is a 1600…

A: The diameter of shaft AB is .The diameter of shaft CD is .The diameter of gear B is .The diameter of…

Q: Gear with z=24 tooth number will be manufactured from a circular material with an outer diameter of…

A: This question is related to the gear dimensions. Module=Dz D is the diameter of the pitch circle, Z…

Q: Below is the arrangement for a gear train. A motor delivers 200-hp at 540-RPM to the input gear A.…

A: The speed of gear A, NA = 540 rpmThe power delivers by motor, P = 200 hp

Q: A pair of parallel helical gears consists of a 20 teeth pinion mashing with a 40 teeth gear. The…

A: “Since you have posted a question with multiple sub-parts, we will solve the first three sub-parts…

Q: A compound shaft drives three gears. Segments (1) and (2) of the compound shaft are hollow aluminum…

Q: 1. The transmission ratio of two meshing spur gears i12=2.5, center distance a =154mm, module m=4mm.…

Q: Q1 Two spur gears in a simple train shown in Figure Q1 are having the same module, m = 2 and their…

Q: Two parallel shafts, about 550 mm apart are to be connected by spur gears. One shaft is to run at…

Q: In the fabric dye-printing system given in the figure, the motion is transmitted from the electric…

A: Given:z1=17;z2=85;z3=18;z4=72;F = 2000 ND = 200 mmv = 1 m/sTo find:a) Find the number of revolutions…

Q: angular velocity wg (in rad/s) is

A: Given data, For the epiccylic gear arrangement shown in the figure, ω2=100…

Q: A two-stage gear train consists of four gears meshed together (Figure 10). The secondand third gears…

A: for the given gear train To determine angular velocity of gear 4 in terms of ω1,n1,n2,n3 and n4

Q: Problem : A train of spur gears with 20°full-depth involute teeth is shown in the Figure below. Gear…

A: Here Given Power P=5000 WattN1=720 rpmT1=20T2=50T3=30T4=60m=4mmϕ=20°Radius of…

Q: 1. Classification of gears according to the possibility of movement of gears axis of rotation…

A: Introduction: A gear is a spinning circular machine element with cut teeth or inserted teeth that…

Q: Objective: Dimensional comparison between straight tooth gears and helical cylindrical gears.…

Q: You have been asked by your engineering company to design a complete gear and shaft system shaft…

A: Given:- TA=15 kN-m(clockwise direction),TB=30 kN-m(clockwise direction),TC=75 kN-m(anti-clockwise…

Q: angle angle and 3 1 ween two bearin

Q: (b) Solve the base pitch, centre distance, whole depth and contact ratio of a gear with the given…

Q: The double-reduction helical gearset shown in the figure is driven through shaft 'a' at a speed of…

A: The double-reduction helical gearset shown in the figure is driven through shaft 'a' at a speed of…

Q: i need the answer quickly

Q: Referring to the given figure, spur gear A receives 5 hp at 650 rpm thl B is an idler and gear C is…

Q: A power transmission mechanism consists of a belt drive and a gear train as shown in the figure.…

Q: 2 A pair of 20° involute gears are to be des driving a machine which is to run near as possible to…

Q: Select the correct answer. 1- In figure (1) what the type of gear a- Rack and pinion c- Spur gear…

A: As per our guidelines, we are supposed to answer only first three subparts in case of multiple…

Q: Determine the minimum shaft diameter at locations A, B, C, D, & E for an enclosed industrial…

A: The power transmitted by gear B, P1 = 25 hpThe number of teeth on gear B, Z1 = 24The diametral pitch…

Q: For a pair of standard gears, the module is m=2.5mm，pressure angle is α=20 0. ha*=1. c*=0.25. The…

Q: Problem : A train of spur gears with 20°full-depth involute teeth is shown in the Figure below. Gear…

A: given; φ=200power(P)=50Kwspeed(N)=300rpmSyt=380MPaFOS=2diameter of shaft(d)=?

Q: Question The steel shaft with two different diameters rotates at 4.5 Hz. The power supplied to gear…

A: Answer: The angle of rotation of gear A relative to gear C is 4.42°.

Concept explainers

Power Transmission Elements

It is defined as the energy transfer from one location to another location. The energy will start moving from the energy generation source to the energy applied position to obtain the work output. From this method, a large amount of electric energy moves from the power station to various electrical substations.

Question

A compound shaft drives three gears. Segments (1) and (2) of the compound shaft are hollow aluminum [G=2860 ksi] tubes, which
have an outside diameter of 2.75 in. and a wall thickness of 0.28 in. Segments (3) and (4) are solid 2.14-in.-diameter steel [G = 8000 ksi]
shafts. Assume that L₁-60 in., L₂=4 in., L3=13 in., L4-12 in, Tg-36 kip-in., Tp-45 kip-in., and TE-17 kip-in. The bearings shown allow the
shaft to turn freely.
(a) Determine the maximum magnitude of the shear stress Tmax in the compound shaft.
(b) Determine the rotation angle CIA of flange Ćwith respect to flange A.
(c) Determine the rotation angle EA of gear E with respect to flange A.
Answers:
(a) Tmax=
(b) PCIA
(c) ΦΕΙΛ Ξ
A
i
= i
(1)
5
B
TB
L2
(3)
L3
ksi.
Tp
D
(4)
LA
TE
E
x

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Write the given data with suitable variables.

VIEW

Step 2: A-Determine the value of torque in the torque in the each section.

VIEW

Step 3: B-Determine the angle of rotation.

VIEW

Step 4: C- determine the value of angle of rotation between E-A.

VIEW

Solution

VIEW

Step by step

Solved in 5 steps with 9 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Design of Power Transmission Elements and Power Transmission Systems

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Parvinbhai
Please help with homework
Three spur gear are arranged shown in the figure. Pinion A rotates for about 500 rpm. The three gears have a diametral pitch of 5. Number of teath and angle is shown in the figure. Determine the torque that each shaft is required to transmit and the resultant force on the shaft carrying the gear B. Draw the FBD of the figure.
The gears shown in the figure form an ideal transmission mechanism. Shaft a applies 8.7 Nm of torque to the pinion (gear 2), which rotates clockwise at 2,312 revolutions per minute. All of the gears have a 20 degree pressure angle. Gears 2 and 3 have a module of 2.5 mm, while gears 4 and 5 have a module of 4 mm. What is the speed of shaft c? Express your answer in units of revolutions per minute. McGraw-Hill Companies, Inc for y 12T NO # + C 3 36T- to 스 3/2 X 18T 30T 5
(b) Solve the base pitch, centre distance, whole depth and contact ratio of a gear with the given parameters: Pa= 6, 20 degree pressure angle, 19-tooth pinion is meshed with a 77-tooth gear. 1. honano aean --. . -a..k hooi sohuch (c) Solve the contact ratio of a gear when the base pitch, P, is the same length of action, Z in Question Q2(b). [Selesaikan nisbah sentuh gear apabila jarak benang asas, Ps adalah sama Panjang Tindakan, Z dalam Soalan Q2(b).] If this gear (Q2(b)) is a one of the component needed for designing a compound gear train with ratio at 150:1, design the gear. [Jika gear ini adalah salah satu komponen yang akan digunakan untuk merekabentuk 'train' kompaun gear pada nisbah 150:1, rekabentuk gear ini. (d)
For a pair of standard gears, the module is m=2.5mm，pressure angle is α=20 0. ha*=1. c*=0.25. The teeth number on gear 1 is z1=22. The standard center distance is a=68.75mm. Find the following parameters of gear 2: the teeth number, z2 = ( ) the diameter of reference circle, d2=( )mm the diameter of addendum circle da2 =( )mm the diameter of dedendum circle df2 =( )mm
(3) A mechanism consists of two flexible shafts: shaft1 and shaft 2 which are connected by gear I and gear 2. Each shaft is fixed on one end at a fixed support. Gear 1 J.N Fored Support Shaft 1 Fied Support Shaft 2 Gear 2 length of shaft 1: 1 = 0.3 m; length of shaft 2: 1= 0.2 m; diameter of shaft 1 and shaft 2: d=0.01m; gear number N-48; gear number Ny= 24; density of shaft I and shaft 2 material p = 6000 kg/m³. the two gears have moment of inertia J 4 10 kg m², and J;= 1-10* kg m² Determine the equivalent moment of inertia, Jeg, of the system at the coordinate Oj shown in the figure.
The spur gear arrangement shown in the figure has a pinion (diver Gear A) that rotates at 625 rpm, an idler Gear B and a driven gear (Gear C). The gears have a module of 5 mm and a pressure angle of 20 degrees. Given the number of teeth as shown in the figure, determine: i) ii) iii) The pitch diameters of each of the gears. The torque that each shaft is required to transmit. The forces on each of the gears 40 teeth 490⁰ B 70 teeth 50 teeth
A compound shaft drives three gears, as shown. Segments (1) and (2) of the compound shaft are hollow bronze [G= 6,500 ksi] tubes, which have an outside diameter of 2.15 in. and a wall thickness of 0.2100 in. Segments (3) and (4) are solid 1.00-in.-diameter steel [G= 11,500 ksi] shafts. The shaft lengths are L₁ = 78 in., L₂ = 12 in., L3 = 20 in., and L4 = 26 in. The torques applied to the shafts have magnitudes of TB = 990 lb-ft, Tp = 450 lb-ft, and TE = 160 lb-ft, acting in the directions shown. The bearings shown allow the shaft to turn freely. Using the sign convention presented in Section 6.6., calculate: (a) the magnitude of the maximum shear stress in the compound shaft. (b) the rotation angle of flange C with respect to flange A. (c) the rotation angle of gear E with respect to flange A. TB TD (1) TE (3) Answer: (a) Tmax (b) DC/A = (C) ΦΕΙΑ = LI (2) B psi rad rad C L3 D (4) LA E -X
5.A pair of gears has these parameters: teeth of two gears are Z1=26, Z2=52, modulus m=1.25mm. Please calculate (1)the radius of reference circle of two gears, r1 and r2 (2) The pitch of this pair of gears, p (3) The standard center distance, a (4) Now two gears are mounted with a'=49mm, calculate the radius of two pitch circle for two gears, r1' and r2' . (5)The ratio of angular velocity of two gears, i.
The gears shown in the figure have a module of 12 mm and a 20° pressure angle. The pinion rotates at 951 rev/min clockwise and transmits 163 kW through the idler pair to gear 5 on shaft c. What radial force does gear 4 transmit to gear 5. Give your answer in kN. Do not include units. 187 5 32T x 18T 487