A cohesive soil sample obtained from a known normally consolidated clay deposit is found to have a liquid limit of 80 percent. Approximately what would be the compression index for this soil?

A cohesive soil sample is subjected to an unconfined compression test. The sample fails at a pressure of 3850 lb/ft2 [i.e., unconfined compressive strength lb/ft2]. Determine the soil’s cohesion. If an unconfined compression test is performed on the same clayey soil, what axial load can be expected at failure?

3. A stratum of normally consolidated clay is 25 feet thick and the water content is measured as 50% (Gs=2.7). Consolidation tests on undisturbed samples of the clay indicate Ce = 0.68. On top of the clay is 5 feet of sand with a total unit weight of 120 pcf. To build a parking lot, 8 feet of fill is now placed on top of the sand. Tests on the fill indicate that the average water content is 10% and the average dry unit weight is 115 pef. The water table is located 2 ft below the ground surface. Calculate the settlement of the clay due to the added weight of the fill. Treat the clay as one layer and compute the stresses and change in void ratio at mid-depth in the clay.

If an unconfined compression test is performed on the same clayey soil as described in Problem 4 , what axial load can be expected at failure? problem 4: A cohesive soil sample is subjected to an unconfined compression test. The sample fails at a pressure of 3850 lb/ft2 [i.e., unconfined compressive strength lb/ft2]. Determine the soil’s cohesion.