### Problem StatementA certain Steady-State Steady-Flow (SSSF) control volume has a single inflow and a single outflow. The inflow speed \( V_i \) is 200 meters per second (m/s), and the outflow speed \( V_e \) is 1000 meters per second (m/s). The mass-flow rate \(\dot{m}\) is 5 kilograms per second (kg/s). **Task:**Find the time rate of change of the kinetic energy between the outflow and inflow streams in kilowatts (kW). Ensure that the units are correct.

Answered: Image /qna-images/answer/69c58be2-14ac-41aa-8ab3-0fd5960b31b3.jpg

A certain SSSF control volume with a single inflow and outflow and has an inflow speed V₁ = 200 meters / sec and outflow speed V₂ = 1000 meters/sec, with a mass-flow-rate m(dot) = 5 kg / sec. Find the time rate of change of the kinetic energy between the outflow and inflow streams in kW units must be correct).

A certain SSSF control volume with a single inflow and outflow and has an inflow speed V₁ = 200 meters / sec and outflow speed V₂ = 1000 meters/sec, with a mass-flow-rate m(dot) = 5 kg / sec. Find the time rate of change of the kinetic energy between the outflow and inflow streams in kW units must be correct).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In the Impact of a Jet experiment, Mass=36g, water volume collected=5.0 Liter, time=30 seconds, assume nozzle diameter equal 10mm, then the angle B in degrees is: O None of choices O 120 O 180 O 110 O90 Noxt na
find Step 1: Known, UnknownStep 2: SchematicStep 3: FormulaStep 4: CalculationsStep 5: Discussion A 30 cm diameter pipe, conveying water, branches into two pipes of diameters20 cm and 15 cmrespectively. If the average velocity in the 30 cm diameter pipe is 2.5 m/s, find the discharge inthis pipe (m3/s). Also determine the velocity (m/s) in 15 cm pipe if the average velocity in 20cm diameter pipe is 2 m/s.
Water is pumped into a fire hose through a 6 cm diameter pipe with speed 1m/s. The water in the fire hose flows with a pressure of 200000 Pa. At the end of the fire hose is a nozzle (small hole). The pressure decreases to atmospheric pressure (101300 Pa) when the water leaves the nozzle from the hose. There is no change in height moving from the hose to the nozzle. 1. What is the water speed in a 4 cm diameter fire hose? 2. What is the velocity of the water exiting the nozzle (p=1000kg/m³)? 4. What is the diameter of the nozzle? 3. A Fireworker now connects an additional flexible tube to the nozzle (tube and nozzle has same diameter). He lifts the tube to a height of 1 meter above the ground. At what speed does the water come out of the tube? (hint - the pressure at the exit is still atmospheric)
Help me please
In this question, assume the "additional displacement" is in the positive u direction. A mass weighing 16 lbs stretches a spring 8 inches. The mass is in a medium that exerts a viscous resistance of 1 lbs when the mass has a velocity of 2 ft/sec. Suppose the object is displaced an additional 5 inches and released. Find an equation for the object's displacement, u(t), in feet after t seconds. u(t) =
Spitting cobras can defend themselves by squeezing muscles around their venom glands to squirt venom at an attacker. Suppose a spitting cobra rears up to a height of 0.520 m above the ground and launches venom at 2.80 m/s, directed 57.0° above the horizon. Neglecting air resistance, find the horizontal distance (in m) traveled by the venom before it hits the ground.
1.28. The performance curve for the fan of Problem 1.27 can be approx- imated by a straight line through its BEP (using techniques devel- oped in Chapter 7). The curve is Aps = 4488 – 166Q, with ApT in Pa and Q in m³/s. If this fan is connected to a 1-m dia- meter duct (f = 0.045) whose length is 66 m, what flow rate will result? %3D
A 7.6 cm jet of water strikes a vertical plate in its centrod. Find the velocity of water through the jet if a horizontal force of 44.5 N is applied to: 1) hold the plate stationary. 2) move the plate to the right by a constant velocity of 3 m/s?[ Note: Neglect the pressure force effects]
A wind energy generator generates 1050 w at rated speed of 26 mph at the atmospheric pressure and temperature at 20 deg C. calculate the change of output if wind generator is operates altitude of 1800 m temperature 10 deg C, wind speed 24 mph , atmospheric pressure 0.88 atm. Area= power generated for 1800 m=
EX.1 An axial flow pump with an impeller rotor diameter of 30 cm handles water at a rate of 2.7 m*/minute running at 1500 rpm. The energy input is K o W 125 J/kg and Total to Total efficiency is 0.75. If a geometrically similar pump has a diameter of 20 cm running at 3000 rpm, find its: i) Flow rate ii) input power.